Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Banks Power Ford 7.3L Git-Kit 2188 37.00 Banks Power Ford 7.3L Git-Kit
$ 613.72
Git-Kit® PICKUP: Banks Git-Kit is a kind-to-your-budget rocket-booster that unleashes top gains of +40 hp and +72 lb-ft torque, raises turbo boost and maintains safe EGTs. OttoMind® Module Banks' electronic OttoMind engine calibration module perfects the air-fuel ratio, maintains exhaust gas temperatures (EGT) safely at or below the stock recommendation, and tunes low-end torque for strong acceleration and load-pulling capability. Unlike "fits-all" chips that provide crude fuel increases, OttoMind precisely matches fuel delivery to Banks' airflow improvements, so your diesel engine will last its 300-400,00-mile lifetime. Each OttoMind is calibrated to a specific, corresponding Power Stroke engine code. Monster® T.O.P. turbine-outlet pipe Banks' stainless constant-diameter Monster T.O.P. (bottom pipe) flows 728 cfm @1 psi, beating the factory's turbine-outlet pipe (top pipe) by 26% and the nearest competitor by 12%. Banks protects diesel durability by maintaining the turbine-outlet EGT safely within the stock recommendation. Includes integral stainless-clad, ceramic-matrix heat shielding (not shown) and pyrometer-probe fitting. *Must supply Vehicle Calibration Code when ordering. Look for 4-character code with three letters followed by one digit (eg:NVK6) Code can be found on forward end of drivers door if not present or readable, locate black plastic ECU box under dash, left of pedals. Code is on back of ECU.
Banks Power Powerstroke 7.3L PowerPack system 2185 125.00 Banks Power Powerstroke 7.3L PowerPack system
4.667 5 3
$ 2798.8
PowerPack® System PICKUP: PowerPack supplies the ultimate in power, utilizing Banks' exclusive Techni-Cooler intercooler assembly that cools and condenses engine-air to fortify performance and durability through the drivetrain and to the road surface. PowerPack uncorks best gains of +120 hp, +256 lb-ft torque and 10% more mileage. In terms of raw power, strong acceleration and lugging heavy cargo up a grade, PowerPack-equipped Power Strokes perform circles around the rest. Example: slash nearly a thousand feet off your 0-to-60 mph distance, and tow from there! Important: Read the Application Notes below before ordering. Banks Ram-Air® filter Banks Ram-Air filter is a lifetime, high-flow air-cleaner element that decreases intake restriction and sends more cool, dense ram-air into your engine. Even wet or dirty, Banks Ram-Air filters outperform conventional ones, because the multi-layer design traps moisture, dust and debris on the oiled, outer surface, allowing air to move through with ease. Includes a service kit for use every 30-50,000 miles. Techni-Cooler® Intercooler system Techni-Cooler produces a maximum reduction in boost temperature with minimum loss of boost pressure, and allows the maximum flow of air to the engine's radiatorvital when pulling heavy loads up steep grades. Banks TwinRam® manifold-inlet assembly provides even, "global" airflow distribution for consistent, even power delivery. With its large 3" boost tubes, wide-open inlet and outlet, thick core area with high volume, streamlined all-aluminum end tanks and TwinRam intake, Banks Techni-Cooler intercooler system feeds cooler, denser air to your engine, which produces more power while keeping exhaust gas temps down. OttoMind® Module Banks' electronic OttoMind engine calibration module perfects the air-fuel ratio, maintains exhaust gas temperatures (EGT) safely at or below the stock recommendation, and tunes low-end torque for strong acceleration and load-pulling capability. Unlike "fits-all" chips that provide crude fuel increases, OttoMind precisely matches fuel delivery to Banks' airflow improvements, so your diesel engine will last its 300-400,00-mile lifetime. Each OttoMind is calibrated to a specific, corresponding Power Stroke engine code. Quick-Turbo® housing Banks developed the Quick-Turbo in conjunction with the Holset turbocharger and major diesel-engine companies, to eliminate sluggishness "out of the hole" and produce strong acceleration. Quick-Turbo produces massive torque right from idle, achieves a higher peak faster, maintains more boost through the powerband, and doesn't over-boost. Monster® exhaust Banks Monster exhaust outflows stock and the competition, and protects diesel durability by maintaining the turbine-outlet EGT safely within the stock recommendation. The stainless, constant-diameter Monster T.O.P. flows 728 cfm @1 psi, beating the factory's turbine-outlet pipe by 26% and the nearest competitor by 12%; includes integral stainless-clad, ceramic-matrix heat shielding and pyrometer-probe fitting. The streamlined exhaust pipe and 3.5" tailpipe are formed of stainless, heavy-wall tubing with constant-diameter bends to slash backpressure. The polished-stainless 4" tailpipe tip provides a cool finishing touch. TransCommand® For those with Ford E4OD automatic transmissions: Banks' electronic TransCommand transforms E4OD automatics into super-duty units by continually corresponding line pressure to power and load levels. Instead of soft, car-like shift characteristics, TransCommand produces firmer shifts, especially when hauling large loads. The module senses the load and commands the transmission to raise the hydraulic pressure accordingly. Light-throttle shifts are smooth and firm, while full-throttle or heavy-load driving produces solid, decisive shifts. Excessive clutch slippage is eliminated, extending transmission life. DynaFact® gauges Superior precision and durability are hallmarks of Banks DynaFact gauges. The pyrometer provides exhaust gas temperature (EGT) measurements that are accurate within 15 degrees F at maximum operating temperatures. Its spring-loaded jeweled movement is resistant to vibration and sports a lit, easy-to-read 0-1500 degrees F face. Banks 0-40 psi boost gauge monitors power and turbo performance. Includes 2-gauge mounting panel. Top-mount and pillar-mount options available. Application Notes 1995 Power Stroke variations: Ford trucks for model year 1995 fall into two categories: early 1995 and late 1995. It is important to know the specific model: Early 1995 model yearlittle or no straight section at muffler outlet, where it connects to tailpipe Late 1995 model yearappx. 3" straight section at muffler outlet, where it connects to tailpipe. *Must supply Vehicle Calibration Code when ordering. Look for 4-character code with three letters followed by one digit (eg:NVK6) Code can be found on forward end of drivers door if not present or readable, locate black plastic ECU box under dash, left of pedals. Code is on back of ECU.Note: Banks Techni-Cooler comes with an all black appearance. Banks logo is for display purposes only.
Banks Power Powerstroke 7.3L Stinger-Plus system 2186 125.00 Banks Power Powerstroke 7.3L Stinger-Plus system
$ 1531.75
Stinger®-Plus system PICKUP: Banks Stinger-Plus utilizes Quick-Turbo to diminish turbo lag and belt you in the behind when you push the throttle. Best gains of +81 hp and +172 lb-ft torque provide plenty of oats when you need 'em, plus 7% better fuel economy. Stinger-Plus-equipped Power Strokes achieve boost 74% quicker and raise the peak boost by 65% over the stock set-up. Important: Read the Application Notes below before ordering. Banks Ram-Air® filter Banks Ram-Air filter is a lifetime, high-flow air-cleaner element that decreases intake restriction and sends more cool, dense ram-air into your engine. Even wet or dirty, Banks Ram-Air filters outperform conventional ones, because the multi-layer design traps moisture, dust and debris on the oiled, outer surface, allowing air to move through with ease. Includes a service kit for use every 30-50,000 miles. OttoMind® Module Banks' electronic OttoMind engine calibration module perfects the air-fuel ratio, maintains exhaust gas temperatures (EGT) safely at or below the stock recommendation, and tunes low-end torque for strong acceleration and load-pulling capability. Unlike "fits-all" chips that provide crude fuel increases, OttoMind precisely matches fuel delivery to Banks' airflow improvements, so your diesel engine will last its 300,000-400,000-mile lifetime. Each OttoMind is calibrated to a specific, corresponding Power Stroke engine code. Quick-Turbo® housing Banks developed the Quick-Turbo in conjunction with the Holset turbocharger and major diesel-engine companies, to eliminate sluggishness "out of the hole" and produce strong acceleration. Quick-Turbo produces massive torque right from idle, achieves a higher peak faster, maintains more boost through the powerband, and doesn't over-boost. Monster® exhaust Banks Monster exhaust outflows stock and the competition, and protects diesel durability by maintaining the turbine-outlet EGT safely within the stock recommendation. The stainless, constant-diameter Monster T.O.P. flows 728 cfm @1 psi, beating the factory's turbine-outlet pipe by 26% and the nearest competitor by 12%; includes integral stainless-clad, ceramic-matrix heat shielding and pyrometer-probe fitting. The streamlined exhaust pipe and 3.5" tailpipe are formed of stainless, heavy-wall tubing with constant-diameter bends to slash backpressure. The polished-stainless 4" tailpipe tip provides a cool finishing touch. TransCommand® For those with Ford E4OD automatic transmissions: Banks' electronic TransCommand transforms E4OD automatics into super-duty units by continually corresponding line pressure to power and load levels. Instead of soft, car-like shift characteristics, TransCommand produces firmer shifts, especially when hauling large loads. The module senses the load and commands the transmission to raise the hydraulic pressure accordingly. Light-throttle shifts are smooth and firm, while full-throttle or heavy-load driving produces solid, decisive shifts. Excessive clutch slippage is eliminated, extending transmission life. DynaFact® gauges Superior precision and durability are hallmarks of Banks DynaFact gauges. The pyrometer provides exhaust gas temperature (EGT) measurements that are accurate within 15 degrees F at maximum operating temperatures. Its spring-loaded jeweled movement is resistant to vibration and sports a lit, easy-to-read 0-1500 degrees F face. Banks 0-40 psi boost gauge monitors power and turbo performance. Includes 2-gauge mounting panel. Top-mount and pillar-mount options available. Application Notes 1995 Power Stroke variations: Ford trucks for model year 1995 fall into two categories: early 1995 and late 1995. It is important to know the specific model: Early 1995 model yearlittle or no straight section at muffler outlet, where it connects to tailpipe Late 1995 model yearappx. 3" straight section at muffler outlet, where it connects to tailpipe *Must supply Vehicle Calibration Code when ordering. Look for 4-character code with three letters followed by one digit (eg:NVK6) Code can be found on forward end of drivers door if not present or readable, locate black plastic ECU box under dash, left of pedals. Code is on back of ECU.
Banks Power Powerstroke Stinger system 2187 125.00 Banks Power Powerstroke Stinger system
$ 1121.91
Stinger® system PICKUP: Get robust performance at a modest cost. Banks Stinger provides best gains +61 hp and +110 lb-ft torque with a bonus improvement of 6% more miles-to-the-tank. Banks OttoMind engine calibration module changes the shape of the fuel curve to match the improved airflow and optimize power right up to the shift points. Important: Read the Application Notes below before ordering. Banks Ram-Air® filter Banks Ram-Air filter is a lifetime, high-flow air-cleaner element that decreases intake restriction and sends more cool, dense ram-air into your engine. Even wet or dirty, Banks Ram-Air filters outperform conventional ones, because the multi-layer design traps moisture, dust and debris on the oiled, outer surface, allowing air to move through with ease. Includes a service kit for use every 30-50,000 miles. OttoMind® Module Banks' electronic OttoMind engine calibration module perfects the air-fuel ratio, maintains exhaust gas temperatures (EGT) safely at or below the stock recommendation, and tunes low-end torque for strong acceleration and load-pulling capability. Unlike "fits-all" chips that provide crude fuel increases, OttoMind precisely matches fuel delivery to Banks' airflow improvements, so your diesel engine will last its 300-400,00-mile lifetime. Each OttoMind is calibrated to a specific, corresponding Power Stroke engine code. Monster® exhaust Banks Monster exhaust outflows stock and the competition, and protects diesel durability by maintaining the turbine-outlet EGT safely within the stock recommendation. The stainless, constant-diameter Monster T.O.P. flows 728 cfm @1 psi, beating the factory's turbine-outlet pipe by 26% and the nearest competitor by 12%; includes integral stainless-clad, ceramic-matrix heat shielding and pyrometer-probe fitting. The streamlined exhaust pipe and 3.5" tailpipe are formed of stainless, heavy-wall tubing with constant-diameter bends to slash backpressure. The polished-stainless 4" tailpipe tip provides a handsome finishing touch. TransCommand® For those with Ford E4OD automatic transmissions: Banks' electronic TransCommand transforms E4OD automatics into super-duty units by continually corresponding shifts to power and load levels. Instead of soft, car-like shift characteristics, TransCommand produces firmer shifts, especially when hauling large loads. The module senses the load and commands the transmission to raise the hydraulic pressure accordingly. Light-throttle shifts are smooth and firm, while full-throttle or heavy-load driving produces solid, decisive shifts. Excessive clutch slippage is eliminated, extending transmission life. DynaFact® gauges Superior precision and durability are hallmarks of Banks DynaFact gauges. The pyrometer provides exhaust gas temperature (EGT) measurements that are accurate within 15 degrees F at maximum operating temperatures. Its spring-loaded jeweled movement is resistant to vibration and sports a lit, easy-to-read 0-1500 degrees F face. Banks 0-40 psi boost gauge monitors power and turbo performance. Includes 2-gauge mounting panel. Top-mount and pillar-mount options available. Application Notes 1995 Power Stroke variations: Ford trucks for model year 1995 fall into two categories: early 1995 and late 1995. It is important to know the specific model: Early 1995 model yearlittle or no straight section at muffler outlet, where it connects to tailpipe Late 1995 model yearappx. 3" straight section at muffler outlet, where it connects to tailpipe *Must supply Vehicle Calibration Code when ordering. Look for 4-character code with three letters followed by one digit (eg:NVK6) Code can be found on forward end of drivers door if not present or readable, locate black plastic ECU box under dash, left of pedals. Code is on back of ECU.
TAKE 10% OFF SITEWIDE* WITH OUR MEMORIAL DAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: MEMORIAL10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 5/28/19 only.