Products Showing Parts for — {{ }}

No Results Showing Parts for — {{ }}
Dorman 917-502 Wheel Hub Lock Actuator 29235 1.00 Dorman 917-502 Wheel Hub Lock Actuator
$ 25.69
The Dorman 917-502 Wheel Hub Lock Actuator allows you to replace just the failed part, and not the entire assembly on your 2001-2004 Ford F-250/350/450/550 Super Duty and 2001-2005 Excursion. Dormans Locking Hub is manufactured for affordability and convenience. The high-quality materials ensure long-lasting durability for year after year of service. The original design incorporated prongs into the interlock, which over time become brittle and snap. The Dorman Engineered unit uses a different locking system and spring for an improved design and part life. Features: Restores 4WD System To Proper Performance Replace Just The Part, Not The Assembly Replaces Ford OE Part#: 1C3Z-3B396-CB Direct-Fit For Easy Of Installation Application Note: Manual front wheel engaging, 1C34 Prefix Tag Only; Actuator Only
Dynatrac FO60-3B396-BA DynaLoc Manual Hubs 21920 15.00 Dynatrac FO60-3B396-BA DynaLoc Manual Hubs
$ 589
The Dynatrac FO60-3B396-BA DynaLoc Manual Hubs for your 99-04 Ford Super Duty are designed to be 3-times stronger than other Dana 60 Locking Hubs. As the first truly new locking hub design in over 20 years these hubs features a unique heat-treated, chromoly steel gear tooth design that will not disengage under high torque load and only requires an 1/8 of a turn to engage. Built with a low profile knob assembly and short, tough steel bezel, this greatly decreases impact with rocks and other obstacles. Features: Fits 30 Spline Axles Low Profile Knob Assembly Unique Gear Tooth Design Defaults To Locked Position Applications: 1999-2004 Ford w/ D50 and D60 w/ 30 Spline Axle Shafts
Dynatrac Free-Spin Hub Kit 10586 50.00 Dynatrac Free-Spin Hub Kit
5.00 5 2
$ 1889
Dynatracs Free-Spin heavy duty hub conversion kits are designed to replace the factory unit bearings with a fixed spindle design for superior strength, reliability, safety, and performance. While the factory unit bearing is non-serviceable, cannot be inspected, and prone to failure, the Free-Spin Hub Conversion offers ease of maintenance, a much smoother ride, greater fuel economy on Dodge trucks, and longer axle life. The simple bolt-on kit includes common and serviceable Timken bearings, chromoly spindles, cast nodular wheel hubs, Warn Premium manual locking hubs, and massive 1.50 diameter, 35-spline outer axle shafts. Consider an upgrade and substitute the Warn Premium locking hubs to Dynatracs Dynaloc manual locking hubs for greater strength, reliability, and a short, custom machined bezel to improve your hubs looks. All parts are made in the USA. Features: Increases reliability Lower cost of ownership- Parts can be easily serviced for longer life Simple bolt on installation No machining or welding Smoother ride and better handling Reduce wear and increase mileage Ford Application Notes: Coarse studs are 14mm x 2.0 Fine Studs are 14mm x 1.5 Dodge Application Notes: Dodge Dually (DRW) - This product will require specialty wheel adapters (not included) for use on Dodge Dually models. *ABS is not supported on early Dodge applications. 2013-2016 Models - OEM Wheels with Center Cap will not fit with this upgrade. Aftermarket wheels are required.
Mile Marker 449SS Stainless Steel Lockout Hubs 8962 20.00 Mile Marker 449SS Stainless Steel Lockout Hubs
3.25 5 4
$ 154.98
The Mile Marker 449SS Stainless Steel Lockout Hubs replace your original equipment manual or automatic hubs. Available for many applications these heavy-duty hubs are designed to exceed industry standards and provide the best performance for even the most extreme off-roaders. Sold as a pair. Specifications: 30 Spline Axles 1.312 Axle OD GM Applications: Chevy IT (K-30) Pickup '78-'87 Chevy IT Dana 50 and 60 Axle '77-'87 Chrysler/Plymouth/Dodge 1 Ton Dana 50 and 60 Axle '90-'93 Dodge 1 Ton Dana 50 and 60 Axle 90-93 Ford Applications: F-250 hv dty '59-'87, '90-'04 ex. F/T A, B 1 Ton Dana 50 and 60 Axle '90-'04 A F-350, 450 Dana 50 and 60 Axle '76-'04 A Application Notes: A. if OEM automatic hubs, a conversion kit is required to convert manual hubs. Item # 95-32721 B. 73-79 vehicles with full-time 4 wheel drive require a transfer case conversion kit.
XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:

  • UPDATE: Effective 6/1 Customer Service resumes normal business hours of M-F 8:30 – 9:00pm EST.
  • Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
  • Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
  • All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.