The AFE 46-20104-B BladeRunner 3" Hot and Cold Side Intercooler Tubes increase flow, performance, and underhood aesthetics in your 2003-2007 Ford 6.0L Powerstroke. Built from 3" mandrel-bent tubing, these intercooler tubes outflow the stock and feature a powdercoated wrinkle-black coating for heat resistance and long life.
Flow and Performance:
The intercooler tubes are constructed of 3" mandrel bent aluminum tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The smooth bends and larger diameter tubing allow for low turbulence, increasing horsepower, torque and lowering EGT's.
Installation is a snap:
Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes heavy-duty 5-Ply couplings for strength. These tube kit works with stock or aFe's upgraded intercooler (46-20102-1).
Unique laser-cut aFe Power logo plates are welded-on for an aggressive style.
Outflows Stock Intercooler Tubes
3" Mandrel-Bent Aluminum Construction
Replaces Both Hot and Cold Side Of The Intercooler
Powder-Coated Wrinkle Black For Heat Resistance and Long Life
Includes High-Temp Couplings and High Quality Stainless Steel Clamps
AFE 46-20108-B BladeRunner 3" Hot Side Intercooler Tube354928.00
Outflow the factory hot side intercooler tube on your 2003-2007 Ford 6.0L Powerstroke by 7% with the AFE 46-20108-B BladeRunner 3" Hot Side Intercooler Tube. AFE constructs the 46-20108-B from 3" mandrel-bent aluminum tubing for strength, increased airflow, and reduced turbulence then adds a wrinkle-black powder coat for good looks and excellent heat resistance. Utilizing the included reinforced couplers and stainless steel clamps, this AFE hot side tube is a direct replacement for your factory tube and mates right up to the factory intercooler for a hassle-free installation. This tube is also equipped with an 1/8" NPT port for adding a sensor or injection. Features:Direct Hot Side ReplacementIncreased Flow and PerformanceMandrel-Bent 3" Aluminum TubeWrinkle-Black Powder Coat FinishIncludes Reinforced Coupers and Stainless Steel ClampsAFE 46-20109 BladeRunner 3" Cold Side Intercooler Tube1380810.00
Replace the restrictive factory cold-side intercooler tube on your 2003-2007 Ford 6.0L Powerstroke with the free-flowing AFE 46-20109 BladeRunner 3" Cold Side Intercooler Tube. Perfect Fit:Tube comes complete with 4-ply heavy duty couplings and constant tension T-bolt clamps for a tight and secure installation.Flow and Performance:The intercooler tube is constructed of 3" mandrel bent powder-coated stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs.Installation is a snap: Utilizing the factory mounting locations provides stability and a hassle-free installation.Features:100% MIG-WeldedConstant Tension T-Bolt ClampsStainless Steel Construction4-Ply Heavy Duty CouplingsCold Side Intercooler TubeBD-Power 1047034 Intercooler Hose & Clamp Kit w/ Intake Tube1569611.00
The BD-Power 1047034 Intercooler Hose and Clamp Kit w/ Intake Tube is the easiest way to change the old, worn factory boots on your 03-07 Ford 6.0L Powerstroke. Nothing can put an end to a quarter mile pass or hill climb faster than a turbo hose that blows off. Now, you can eliminate this problem with the BD Hose and Clamp Kit. Featuring eye-catching, Nomex silicone hoses that can withstand over 100 PSI and are secured by rugged, spring-loaded, stainless steel T-bar clamps. Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel.Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel. Includes BD-Power Metal Intake Pipe to replace the plastic factory pipe. Features:Driver Side (Outlet)Heavy Duty ClampsCan Withstand Over 100lbs Of BoostIncludes Metal Intake Pipe ReplacementNote: This hose and clamp kit is for use with stock intercoolers or aftermarket intercoolers that utilize a stock sized inlet and outlet. Dorman 904-272 Cold Side Intercooler Pipe Kit294527.00
The Dorman 904-272 Cold Side Intercooler Pipe Kit for your 2005-2007 Ford 6.0L Powerstroke restores the power and performance that you're robbed of by leaking and torn intercooler couplers. The Dorman Intercooler Pipe features a high-quality design that withstands the intensely pressurized air of the turbo system, ensuring year after year of service.
Durable Oil and Heat Resistant Material
Replaces Ford OE Part#: 6C3Z-6C646-BA
Ford Intercooler Pipe Upgrade 6C3Z-6C640-AA162796.90
Don't risk the stock brittle plastic intercooler pipe taking down your 2003-2007 Ford 6.0L Powerstroke, replace it with a genuine Ford Intercooler Pipe Upgrade 6C3Z-6C640-AA. This mandrel bent driver side intercooler pipe will provide a factory fit and includes boots and clamps for a seamless installation. Features:Genuine Ford PartIncludes Boots and ClampsDriver Side ReplacementStainless Steel ConstructionMishimoto MMICP-F2D-03BK Intercooler Pipe & Boot Kit1777310.00
Upgrade your intercooler pipes with the Mishimoto MMICP-F2D-03BK Intercooler Pipe and Boot Kit in your 2003-2007 Ford 6.0L Powerstroke. The factory piping that comes on your truck has numerous restrictive bends that impede airflow and choke out the power that your engine can produce. Mishimoto intercooler piping is engineered to eliminate unnecessary bends, giving you an increase in airflow and power. The Mishimoto intercooler pipe kit includes DuraCore boots and constant-tension T-bolt clamps. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots.Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. For greater improvements in charge-air cooling, pair this piping kit with the Mishimoto performance intercooler. The Mishimoto 6.0L Powerstroke intercooler pipe and boot kit is made in the USA and includes our signature lifetime warranty.Features: 3.0" Polished Aluminum Intercooler Pipes Direct-Fit Replacement Silicone Boots with DuraCore:Boot 1: 3.00Boot 2: 3.00Boot 3: 3.00, 3.23Boot 4: 2.83, 3.00Constant Tension T-Bolt Clamps:(1) 2.75 Constant Tension T-Bolt Clamp(6) 3.25 Constant Tension T-Bolt Clamps(1) 3.5 Constant Tension T-Bolt ClampKit Includes: (2) Aluminum Intercooler Pipes(4) Silicone Boots with DuraCore Technology(8) Constant Tension T-Bolt Clamps(2) Aluminum Mishimoto M Logo BadgesLimited Lifetime WarrantyApplication Notes:This kit will not fit vehicles equipped with dual alternators.This kit replaces intercooler inlet pipes with the following part numbers: 2005-2007: C3Z-6K769-AA, 2003-2004: 6C3Z-6K769-B Mishimoto MMICP-F2D-03CBK Cold Side Intercooler Pipe & Boot Kit264895.00
The Mishimoto MMICP-F2D-03CBK Cold Side Intercooler Pipe and Boot Kit for your 2003-2007 Ford 6.0L Powerstroke is the perfect upgrade the for the factory intercooler pipe on your truck. If your 6.0L Powerstroke came with a plastic intercooler pipe and you are tired of it blowing off the intake manifold or are nervous it is going to burst under boost, the Mishimoto intercooler kit is a perfect fit for your truck!
The factory pipe and boot features numerous restrictive bends and does not stand a chance against the heat and pressure of your high-powered 6.0L; upgrade to the Mishimoto kit for increased reliability, durability, and performance. The Mishimoto Cold-Side Pipe is constructed of mandrel-bent aluminum with a polished finish and eliminates restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs.
This kit includes Mishimoto Silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts.
To add even more reliability this kit includes Mishimoto Constant-Tension T-bolt Clamps for accurate and consistent holding power. This cold-side pipe and boot kit is the perfect addition to the Mishimoto 6.0L Powerstroke Performance Intercooler. If you are looking to upgrade both hot-side and cold-side intercooler pipes at the same time, purchase the full Intercooler Pipe and Boot Kit. Like all Mishimoto products, this Cold-Side Intercooler Pipe and Boot Kit comes with the Mishimoto Lifetime Warranty.
Replaces Weak Factory Plastic Pipe
Direct fit for the 6.0L Powerstroke
Mandrel-bent, polished aluminum pipe eliminates restrictive bends
Improves airflow, power, and EGTs
Mishimoto Lifetime Warranty
Pipe Construction: Polished Aluminum
Constant-Tension T-Bolt Clamps:
(4) 3.25 Constant-Tension T-Bolt Clamps
Silicone Boots with DuraCore:
Boot 1: 3.00
Boot 2: 3.00
Purchase Includes: (1) Aluminum Intercooler Pipe, (2) Silicone Boots with DuraCore Technology, (4) Constant-Tension T-Bolt Clamps, (2) Aluminum Mishimoto "M" Logo Badges, Mishimoto Lifetime Warranty
0307 Ford F-250 w/ 6.0L Powerstroke
0307 Ford F-350 w/ 6.0L Powerstroke
0307 Ford F-450 w/ 6.0L Powerstroke
0307 Ford F-550 w/ 6.0L Powerstroke
Installation Torque Specs
27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).
Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer.
A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product.
The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid.
MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products.
Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.
XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:
Effective 3/16 we have shifted Customer Service hours to 8:30 – 7:00pm EST. To ensure compliance with New Jersey’s recent curfew.
Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.