Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Direct-Fit Hoses & Clamps

New Product Filters!
BD-Power 1047034 Intercooler Hose & Clamp Kit w/ Intake Tube 15696 11.00 BD-Power 1047034 Intercooler Hose & Clamp Kit w/ Intake Tube
$ 350
The BD-Power 1047034 Intercooler Hose and Clamp Kit w/ Intake Tube is the easiest way to change the old, worn factory boots on your 03-07 Ford 6.0L Powerstroke. Nothing can put an end to a quarter mile pass or hill climb faster than a turbo hose that blows off. Now, you can eliminate this problem with the BD Hose and Clamp Kit. Featuring eye-catching, Nomex silicone hoses that can withstand over 100 PSI and are secured by rugged, spring-loaded, stainless steel T-bar clamps. Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel.Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel. Includes BD-Power Metal Intake Pipe to replace the plastic factory pipe. Features:Driver Side (Outlet)Heavy Duty ClampsCan Withstand Over 100lbs Of BoostIncludes Metal Intake Pipe ReplacementNote: This hose and clamp kit is for use with stock intercoolers or aftermarket intercoolers that utilize a stock sized inlet and outlet.
BD-Power 1047035 Intercooler Hose & Clamp Kit 3885 4.00 BD-Power 1047035 Intercooler Hose & Clamp Kit
$ 255
The BD-Power 1047035 Intercooler Hose and Clamp Kit is the easiest way to change the old, worn factory boots on your 03-07 Ford 6.0L Powerstroke. Nothing can put an end to a quarter mile pass or hill climb faster than a turbo hose that blows off. Now, you can eliminate this problem with the BD Hose and Clamp Kit. Featuring eye-catching, Nomex silicone hoses that can withstand over 100 PSI and are secured by rugged, spring-loaded, stainless steel T-bar clamps. Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel. Features: Nomex Silicone Hoses Can Withstand Over 100 PSI Rugged, Spring-Loaded Stainless T-Bar Clamps Direct Replacement For Factory Hoses Note: These hoses are for use with stock intercoolers or aftermarket intercoolers that utilize stock boots and tubes.
Dorman 904-212 Turbo To Intercooler Pipe Hose 29506 1.00 Dorman 904-212 Turbo To Intercooler Pipe Hose
$ 53.95
The Dorman 904-212 Turbo To Intercooler Pipe Hose for your 2003-2004 Ford 6.0L Powerstroke is engineered from high-grade silicone for a prolonged life. Dorman's intake hoses restore power to your diesel engine that is commonly lost due to torn or leaking boots. Features: Direct Replacement Heat and Oil Resistant Replaces Ford OE Part#: 5C3Z 6C640-AA, 6C3Z-6C640-C Application Notes: Turbo to intercooler adapter hose, duct to charge air cooler
Dorman 904-242 Intercooler Boot Kit 29309 2.00 Dorman 904-242 Intercooler Boot Kit
$ 143.95
The Dorman 904-242 Intercooler Boot Kit for your 2003-2007 Ford 6.0L Powerstroke are re-engineered from upgraded materials for increased durability. Dormans Intercooler Boot Kit ensures long-lasting performance. The textured, oil-resistant exterior prevents clamp slippage, reliably securing the Boot in place. Features: Re-Engineered Materials Designed For Leak Free Performance Replaces Ford OE Part#: 6C3Z-6C640-B, 6C3Z-6K786-CA, 6C3Z-6K786-EA
Dorman 904-400 Turbo Outlet Hose 29407 1.00 Dorman 904-400 Turbo Outlet Hose
$ 50.95
The Dorman 904-400 Turbo Outlet Hose is designed as a direct replacement for your 2005-2007 Ford 6.0L Powerstroke. Dormans Turbocharger Intercooler Hose is engineered to restore the engine power by eliminating the boost leaks that a damaged hose can cause. Its high-quality design withstands the intensely pressurized air of the turbo system, ensuring year after year of service. Features: Direct Fit Replaces Ford OE Part#: 6C3Z-6C640-A Application Notes: Position: Right, Hose to Air Cleaner; Hot Side
Mishimoto MMBK-F2D-03BK Factory-Fit Boot Kit 17771 5.00 Mishimoto MMBK-F2D-03BK Factory-Fit Boot Kit
$ 189.95
The Mishimoto MMBK-F2D-03BK Factory-Fit Boot Kit is a direct-fit silicone boot kit with DuraCore technology designed specifically for the 6.0L Ford Powerstroke. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto constant tension T-bolt clamps for accurate and consistent holding power. This boot kit is precision engineered for a flawless fit on your Powerstroke and will provide years of service. Included with this boot kit is the signature Mishimoto lifetime warranty. Features: Passenger (Hot) Side Only Direct Fit Replacement Durable, DuraCore Technology Constant Tension T-Bolt Clamps Fits Stock and Mishimoto Intercoolers Specifications: Interior Material: 5 Layers of Heat-Resistant Embedded Fibers Exterior Material: Silicone Interior Layer: DuraCore Ext. Material Temp. Rating: 428 F Int. Layer Temp. Rating: 572 F Inner Diameter: Boot 1: 3.00, 3.25 Boot 2: 2.45, 2.50 Outer Diameter: Boot 1: 3.40, 3.65 Boot 2: 2.85, 2.90 Factory Part Number Boot 1: 6C3Z-6C640-B Boot 2: 6C3Z-6C640-A Applications: 2003-2007 Ford F250 w/ 6.0L Powerstroke 2003-2007 Ford F350 w/ 6.0L Powerstroke 2003-2007 Ford F450 w/ 6.0L Powerstroke 2003-2007 Ford F550 w/ 6.0L Powerstroke Kit Includes: (2) Silicone Boots with DuraCore Technology (4) Constant Tension T-Bolt Clamps Limited Lifetime Warranty LIFETIME WARRANTY Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer. A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product. The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid. MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products. Accident Protection Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.
Mishimoto MMBK-F2D-03CBK Factory-Fit Boot Kit 26484 4.00 Mishimoto MMBK-F2D-03CBK Factory-Fit Boot Kit
$ 165.95
The Mishimoto MMBK-F2D-03CBK Factory-Fit Boot Kit is a direct-fit silicone boot kit with DuraCore technology designed specifically for your 2003-2004 6.0L Ford Powerstroke. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Factory-Fit Boot Kit is a direct-fit silicone boot kit with DuraCore technology designed specifically for your 2003-2004 6.0L Ford Powerstroke. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto constant tension T-bolt clamps for accurate and consistent holding power. This boot kit is precision engineered for a flawless fit on your Powerstroke and will provide years of service. Included with this boot kit is the signature Mishimoto lifetime warranty. Features: Driver (Cold) Side Only Direct Fit Replacement Durable, DuraCore Technology Constant Tension T-Bolt Clamps Specifications: Interior Material: 5 Layers of Heat-Resistant Embedded Fibers Exterior Material: Silicone Interior Layer: DuraCore Ext. Material Temp. Rating: 428 F Int. Layer Temp. Rating: 572 F Inner Diameter: Boot 1: 3.00, 3.00 Boot 2: 3.00, 3.00 Outer Diameter: Boot 1: 3.40, 3.40 Boot 2: 3.40, 3.40 Factory Part Number Pipe (with boots): 6C3Z-6C640-AA Boot 1: 3C34-6C640-CA Boot 2: 3C34-6C640-DA Note: Will fit 2005-2007 trucks which have converted the drivers side metal pipe P/N 6C3Z-6C640-AA. Applications: 2003-2004 Ford F250 w/ 6.0L Powerstroke 2003-2004 Ford F350 w/ 6.0L Powerstroke 2003-2004 Ford F450 w/ 6.0L Powerstroke 2003-2004 Ford F550 w/ 6.0L Powerstroke Kit Includes: (2) Silicone Boots with DuraCore Technology (4) Constant Tension T-Bolt Clamps Limited Lifetime Warranty LIFETIME WARRANTY Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer. A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product. The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid. MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products. Accident Protection Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.
Mishimoto MMBK-F2D-03CL Factory Fit Cold-Side Lower Boot 31901 1.00 Mishimoto MMBK-F2D-03CL Factory Fit Cold-Side Lower Boot
$ 103.95
The Mishimoto MMBK-F2D-03CL Factory Fit Cold-Side Lower Boot is a direct replacement for your 2003-2004 Ford 6.0L Powerstroke. The Mishimoto direct-fit silicone boot features Mishimoto DuraCore technology as the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this boot includes Mishimoto constant tension T-bolt clamps for accurate and consistent holding power. This boot kit is precision engineered for a flawless fit on your Powerstroke and will provide years of service. Like all Mishimoto Powerstroke performance parts, this Powerstroke performance boot comes with the Mishimoto Lifetime Warranty. Features: Cold Side, Lower Boot Direct-Fit Replacement Dura-Core Synthetic Inner Layer Includes Constant Tension T-Bolt Clamps Mishimoto Lifetime Warranty Specifications: ID: 3.00" OD: 3.40" Material: Silicone DuraCore Replaces Factory Part# 6C3Z-6C640-DA Application Notes: 2003-2004: Cold side, lower boot. 2005-2007: Can be used as replacement boot when intercooler pipe is upgraded to MMICP-F2D-03C.
Mishimoto MMBK-F2D-03CU Factory Fit Cold-Side Upper Boot 31902 1.00 Mishimoto MMBK-F2D-03CU Factory Fit Cold-Side Upper Boot
$ 70.95
The Mishimoto MMBK-F2D-03CU Factory Fit Cold-Side Upper Boot is a direct replacement for your 2003-2004 Ford 6.0L Powerstroke. The Mishimoto direct-fit silicone boot features Mishimoto DuraCore technology as the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of Mishimoto boots by preventing leaks and blowouts. To add even more reliability, this boot includes Mishimoto constant tension T-bolt clamps for accurate and consistent holding power. This boot kit is precision engineered for a flawless fit on your Powerstroke and will provide years of service. Like all Mishimoto Powerstroke performance parts, this Powerstroke performance boot comes with the Mishimoto Lifetime Warranty. Features: Cold Side, Upper Boot Direct-Fit Replacement Dura-Core Synthetic Inner Layer Includes Constant Tension T-Bolt Clamps Mishimoto Lifetime Warranty Specifications: ID: 3.00" OD: 3.40" Material: Silicone DuraCore Replaces Factory Part# 6C3Z-6C640-BA Application Notes: 2003-2004: Cold side, upper boot. 2005-2007: Can be used as replacement boot when intercooler pipe is upgraded to MMICP-F2D-03C.
Mishimoto MMBK-F2D-03HL Factory Fit Hot-Side Lower Boot 31903 1.00 Mishimoto MMBK-F2D-03HL Factory Fit Hot-Side Lower Boot
$ 103.95
The Mishimoto MMBK-F2D-03HL Factory Fit Hot-Side Lower Boot is a direct replacement for your 2003-2007 Ford 6.0L Powerstroke. The Mishimoto direct-fit silicone boot features Mishimoto DuraCore technology as the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of Mishimoto boots by preventing leaks and blowouts. To add even more reliability, this boot includes Mishimoto constant tension T-bolt clamps for accurate and consistent holding power. This boot kit is precision engineered for a flawless fit on your Powerstroke and will provide years of service. Like all Mishimoto Powerstroke performance parts, this Powerstroke performance boot comes with the Mishimoto Lifetime Warranty. Features: Hot-Side, Lower Boot Direct-Fit Replacement Dura-Core Synthetic Inner Layer Includes Constant Tension T-Bolt Clamps Mishimoto Lifetime Warranty Specifications: ID: 3.00", 3.25" Transition OD: 3.40", 3.65" Transition Material: Silicone DuraCore Replaces Factory Part# 6C3Z-6C640-B
Mishimoto MMBK-F2D-03HU Factory Fit Hot-Side Upper Boot 31904 1.00 Mishimoto MMBK-F2D-03HU Factory Fit Hot-Side Upper Boot
$ 103.95
The Mishimoto MMBK-F2D-03HU Factory Fit Hot-Side Upper Boot is a direct replacement for your 2003-2007 Ford 6.0L Powerstroke. The Mishimoto direct-fit silicone boot features Mishimoto DuraCore technology as the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of Mishimoto boots by preventing leaks and blowouts. To add even more reliability, this boot includes Mishimoto constant tension T-bolt clamps for accurate and consistent holding power. This boot kit is precision engineered for a flawless fit on your Powerstroke and will provide years of service. Like all Mishimoto Powerstroke performance parts, this Powerstroke performance boot comes with the Mishimoto Lifetime Warranty. Features: Hot-Side, Upper Boot Direct-Fit Replacement Dura-Core Synthetic Inner Layer Includes Constant Tension T-Bolt Clamps Mishimoto Lifetime Warranty Specifications: ID: 2.45", 2.50" Transition OD: 2.85", 2.90" Transition Material: Silicone DuraCore Replaces Factory Part# 6C3Z-6C640-A