Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Competition Race Pipes

New Product Filters!
Hide Info

Warning!

This is a "Race Only" product section used solely for competition. Its use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws.

We cannot and will not answer any questions about fuel mileage gains! Due to this product being designed solely for racing or offroad application, ALL representatives are restricted to talk about fuel mileage. Please do NOT jeopardize their job and our company by asking about fuel mileage testing. You will NOT pass emissions testing with these products installed! Thank you for your cooperation
AFE 49-03010 ATLAS 4" Aluminized Steel Race Pipe 11158 23.00 AFE 49-03010 ATLAS 4" Aluminized Steel Race Pipe
$ 295.26
The AFE 49-03010 ATLAS 4" Aluminized Steel Race Pipe for your 2008-2010 Ford 6.4L Powerstroke is engineered to perform in the most extreme environments. This system is constructed from precision, mandrel bent 4" aluminized steel tubing for maximum flow, increased horsepower, increased torque and lower EGT's. To provide a leak-free seal, OE style band clamps and flanges are used that offer a 360 sealing area vs. cheap U-bolt clamps used in other systems. ATLAS exhaust pipes are the perfect combination of performance, fit and value. Installation is a Snap: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style band clamps and flanges are used for a complete 360 sealing surface. Standard U-bolt clamps used by other systems only seal at the bottom and top of the tube allowing leak paths. Flow and Performance: ATLAS exhaust pipes are constructed of precision, mandrel bent 4" aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: 4" Aluminized Steel Construction Off-Road Race Pipe Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-03011 ATLAS 4" Aluminized Steel Race Pipe 11159 15.00 AFE 49-03011 ATLAS 4" Aluminized Steel Race Pipe
$ 273.31
The AFE 49-03011 ATLAS 4" Aluminized Steel Race Pipe for your 2008-2010 Ford 6.4L Powerstroke is engineered to perform in the most extreme environments. This system is constructed from precision, mandrel bent 4" almuinized steel tubing for maximum flow, increased horsepower, increased torque and lower EGT's. To provide a leak-free seal, OE style band clamps and flanges are used that offer a 360 sealing area vs. cheap U-bolt clamps used in other systems. ATLAS exhaust pipes are the perfect combination of performance, fit and value. Installation is a Snap: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style band clamps and flanges are used for a complete 360 sealing surface. Standard U-bolt clamps used by other systems only seal at the bottom and top of the tube allowing leak paths. Flow and Performance: ATLAS exhaust pipes are constructed of precision, mandrel bent 4" aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: 4" Aluminized Steel Off-Road Race Pipe Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-43024 MACH Force-Xp 4" 409 Stainless Steel Race Pipe 5585 22.00 AFE 49-43024 MACH Force-Xp 4" 409 Stainless Steel Race Pipe
2 5 1
$ 348.12
The AFE 49-43024 MACH Force-Xp 4" 409 Stainless Steel Race Pipe for your 2008-2010 Ford 6.4L Powerstroke is constructed of mandrel bent 409 stainless steel with OE style hangers and clamps for a factory like install. This system is constructed from 4" mandrel bent stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGT's. MACH Force XP exhaust race pipes are the perfect combination of performance, fit and value. Installation is a Snap: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style flange, band clamps and sensor bungs are used for a complete 360 degree sealing surface. Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: MACH Force XP exhaust race pipes are constructed of 4" mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's. Sensor Bungs: OE style bungs/ports are welded-on to re-install your factory sensors. This retains the ability to read the vehicles exhaust settings. Features: 4" T409 Stainless Steel Off-Road / Race Pipe Uses Factory Mounting Locations Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-43026 MACH Force-Xp 3-1/2" 409 Stainless Steel Race Pipe 5603 20.00 AFE 49-43026 MACH Force-Xp 3-1/2" 409 Stainless Steel Race Pipe
$ 348.12
The AFE 49-43026 MACH Force-Xp 3-1/2" 409 Stainless Steel Race Pipe for your 2008-2010 Ford 6.4L Powerstroke is constructed of mandrel bent 409 stainless steel and installs easily in your truck with OE style hangers and clamps. This 3 1/2" race pipe provides maximum flow for increased horsepower, torque and throttle response. The increased air flow also lowers EGT's and helps improve MPG. With sensor bungs, factory-style hangers and band clamps, this race pipe provides an easy, hassle-free installation. Features: Race Pipe - For Off-Road Use Includes Bungs For Factory Sensors 3-1/2" 409 Stainless Steel Construction Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-43027 MACH Force-Xp 4" 409 Stainless Steel Race Pipe 5604 15.00 AFE 49-43027 MACH Force-Xp 4" 409 Stainless Steel Race Pipe
$ 327.18
The AFE 49-43027 MACH Force-Xp 4" 409 Stainless Steel Race Pipe 2008-2010 Ford 6.4L Powerstroke is built from T409 stainless steel and is designed to provide maximum flow for increased horsepower, torque and throttle response. This 4" Race Pipe features a heavy-duty flange that matches up to your factory exhaust system for off-road race use. Uses factory style hangers, band clamp and includes a pyrometer bung for a no-hassle installation. Features: T409 Stainless Steel Construction For Off-Road / Race Use Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-43031 MACH Force-Xp 4" 409 Stainless Steel Race Pipe 6530 23.00 AFE 49-43031 MACH Force-Xp 4" 409 Stainless Steel Race Pipe
$ 348.12
The AFE 49-43031 MACH Force-Xp 4" 409 Stainless Steel Race Pipe for your 2008-2010 Ford 6.4L Powerstroke is constructed of mandrel bent 409 stainless steel with OE style hangers and clamps for a factory like install. This 4" race pipe provides maximum flow for increased horsepower, torque and throttle response. The increased air flow also lowers EGT's. This race pipe comes with the needed installation hardware including band clamps and factory style hangers for a no-hassle installation. This Race Pipe does not have bungs to retain your factory sensors. Features: 4" T409 Stainless Steel Off-Road / Race Pipe Uses Factory Mounting Locations Warning: This free-flow race pipe requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-43032 MACH Force-Xp 4" 409 Stainless Steel Race Pipe 6531 15.00 AFE 49-43032 MACH Force-Xp 4" 409 Stainless Steel Race Pipe
$ 327.18
The AFE 49-43032 MACH Force-Xp 4" 409 Stainless Steel Race Pipe designed for the 2008-2010 Ford 6.4L Powerstroke is built from T409 stainless steel and is designed to provide maximum flow for increased horsepower, torque and throttle response. The MACH Force XP race pipe connects to the stock Catalytic Converter. This 4" race pipe includes a heavy duty flange that matches up to the OE Cat flange perfectly and provides maximum flow for increased horsepower, torque and throttle response. The increased air flow also lowers EGT's and helps improve MPG. Factory style hanger and band clamp are included for a no-trouble installation.. Features: T409 Stainless Steel Construction For Off-Road / Race Use Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
Ford 7C3Z-5H247-B Diesel Particulate Filter (DPF) Gasket 29777 1.00 Ford 7C3Z-5H247-B Diesel Particulate Filter (DPF) Gasket
$ 123.26
The Ford 7C3Z-5H247-B Diesel Particulate Filter (DPF) Gasket is a direct replacement for your 2008-2010 Ford 6.4L Powerstroke. A damaged factory gasket can cause exhaust leaks. Replacing this gasket when servicing your exhaust system ensures leak-free operation. Feature: DPF Flange Gasket Geniune OEM Replacement
P1 Race Parts CFAL457 4" Installer Series Race Pipe 32275 23.00 P1 Race Parts CFAL457 4" Installer Series Race Pipe
$ 144.99
Stay at the top of your class on race day in your 2008-2010 Ford 6.4L Powerstroke with the P1 Race Parts CFAL457 4" Installer Series Competition Race Pipe. P1 Race Parts Competition Series Race Pipes are built from aluminized steel and come complete with OE style hangers and clamps for an easy installation. This 4" Race Pipe provides maximum flow for your purpose built, race truck. Features: No Sensor Bungs 4" Aluminized Steel OE Style Hangers For Easy Installation Maximum Flow For Competition Applications Note: This free-flow race pipe requires the use of an aftermarket performance programmer with off-road tuning. For use on F-250/350/450 pickups. Not for use on Cab and Chassis models.
P1 Race Parts CFAL464 4" Installer Series Race Pipe With Muffler 33810 31.00 P1 Race Parts CFAL464 4" Installer Series Race Pipe With Muffler
$ 214.99
Give your 2008-2010 Ford 6.4L Powerstroke the competitive edge with the P1 Race Parts CFAL464 4" Installer Series Competition Race Pipe With Muffler. P1 Race Parts Competition Series Race Pipes are built from aluminized steel and come complete with OE style hangers and clamps for an easy installation. This 4" Race Pipe provides maximum flow for your purpose built, race truck and a high-flow muffler to give you that perfect sound. Features: No Bungs High-Flow Muffler 4" Aluminized Steel OE Style Hangers For Easy Installation Maximum Flow For Competition Applications Note: This free-flow race pipe requires the use of an aftermarket performance programmer with off-road tuning. This product fits Ford F-250/350/450 pickups. It is not intended for use on Cab and Chassis applications.
P1 Race Parts CFS9457 4" XP Series Race Pipe 32277 23.00 P1 Race Parts CFS9457 4" XP Series Race Pipe
$ 184.99
Stay at the top of your class on race day in your 2008-2010 Ford 6.4L Powerstroke with the P1 Race Parts CFS9457 4" XP Series Competition Race Pipe. P1 Race Parts Competition Series Race Pipes are built from T409 stainless steel and come complete with OE style hangers and clamps for an easy installation. This 4" Race Pipe provides maximum flow for your purpose built, race truck. Features: Without Bungs 4" T409 Stainless Steel OE Style Hangers For Easy Installation Maximum Flow For Competition Applications Note: This free-flow race pipe requires the use of an aftermarket performance programmer with off-road tuning. For use on F-250/350/450 pickups. Not for use on Cab and Chassis models.
TAKE 10% OFF SITEWIDE* WITH OUR MEMORIAL DAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: MEMORIAL10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 5/28/19 only.