1" outside, 3/8" inside nut/ratchet drive for easy removal.
Heavy-duty 600lb. canister
Heavy-Duty coil spring on diesel applications
Wire-backed media provides strength
NF21 synthetic composite material provides maximum engine protection with minimal flow restriction
Heavy-duty center tube provides maximum flow
Anti-backflow valve to reduce damage during cold starts
Heavy-duty .100"-thick base plate for extra strength
Heavy-duty Nitrile rubber gasket for a leak-free sealBeans Diesel 220023 3-Piece Billet Fuel & Oil Filter Cap Set502054.00
Upgrade the plastic oil and two fuel filter caps in your 2008-2010 Ford 6.4L Powerstroke to the much more durable Beans Diesel 220023 Bean Machine 3-Piece Billet Fuel and Oil Filter Cap Set. Machined from 6061 T6 Billet Aluminum, these caps are another example of the dedication Beans Diesel Performance has to creating parts that work and look better than the factory components.Unlike other aftermarket filters and caps, Beans won't allow oil to bypass the filter, keeping your engine safe. Beans caps are compatible with the OEM and Racor filters, offering the best protection available. This kit includes both fuel filter caps and an oil filter cap, all which are tapped with an 1/8" NPT to allow for an oil pressure gauge, oil temperature sending unit, or a fuel pressure gauge.Features:Direct OE ReplacementsSame Footprint As OEM Ford Caps6061 T6 Billet Aluminum ConstructionEach Cap Comes Tapped With 1/8" Hole For MonitoringIncludes Oil Filter Cap, Upper Fuel Filter Cap, and Lower Fuel Filter CapMade In The USA!Note: O-rings not included. It's recommended to install these caps at the time of filter changes, as a new o-ring is supplied with OE filters where applicable.Beans Diesel 220024 2-Piece Billet Fuel & Oil Filter Cap Set502073.00
Replace the brittle plastic factory filter caps on your 2008-2010 Ford 6.4L Powerstroke with the heat resistant Beans Diesel 220024 2-Piece Billet Fuel and Oil Filter Cap Set. Designed to match the factory caps footprint, these billet pieces will offer a more secure seal without worrying about them degrading from heat exposure. Other aftermarket caps and filters allow for oil to bypass the filter, exposing your engine to damage. These caps will still utilize OEM and Racor filters, providing the best protection for your engine. Beans is committed to not only making products that look good, but products that function as well or better than stock! Each cap comes drilled and tapped for 1/8" NPT, allowing the ability to a fuel pressure gauge, oil pressure, oil temperature, or other compatible sensors.Features:Direct OE ReplacementsSame Footprint As OEM Ford Caps6061 T6 Billet Aluminum ConstructionTapped With 1/8" Hole For MonitoringIncludes Oil Filter Cap and Upper Fuel Filter CapMade In The USA!Note: O-rings not included. It's recommended to install these caps at the time of filter changes, as a new o-ring is supplied with OE filters where applicable.Ford Motorcraft FL-2016 Oil Filter213021.00
The Ford Motorcraft FL-2016 Oil Filter for your 2003-2010 Ford 6.0L/6.4L Powerstroke is the same high-quality filter your truck came with from the factory. Built to the highest quality standards the Ford Motorcraft OE filter is designed to provide your engine with the best filtration available.
Sold Individually Genuine Ford PartFactory Replacement Filter
Manufactured To Stringent Specifications
FRAM CH9549 Extra Guard Oil Filter41102.00
The FRAM CH9549 Extra Guard Oil Filter for your 2003-2010 Ford 6.0L/6.4L Powerstroke is a direct replacement for the factory oil filter in your truck. Designed to meet or exceed OE specs, FRAM filters offer an ideal balance of dirt-trapping efficiency and dirt-trapping capacity. Using a special blend of fibers and resin, FRAM has created a proprietary filter media that delivers excellent engine protection. Extra Guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles.
CH9549 Product Details:
Product Type: Full-Flow Lube Cartridge
Gasket I.D: 3.55"
Gasket O.D: 3.86"
Gasket Thickness: .16"
Gasket Usage: Cover Gasket
Product Height: 7.14"
Product I.D: 1.42" (Bottom) .37" (Top)
Product O.D: 3.27"
Relief Valve PSI: None
Note: This filter does not include a cap and may not fit aftermarket caps.
Competitor Cross Reference
AC-DELCO - PF1704
ALLIANCE - ABP/N10G-P550528
AMSOIL - EAO88
Autolite for Oil FIlters - AL9549
BALDWIN - P7235, P7436
CARQUEST - 84313, 84314
CHAMP - LP2017
DEFENSE - DL9549
DONALDSON - P550528
FIRESTONE - LP2017
FLEETGUARD - LF16166
Flying F - CH9549AZ
FORD - 3C3Z-6731-AA
GROUP 7 - V5526
HASTINGS - LF558, LF558F, LF632
HENGST - 32007
IHC-NAVISTAR - 1840752C91, 1840752-C91, 1844588C91, 1844588-C91
LUBER-FINER - LP2017
MANN and HUMMEL - HU958/1X
MANN and HUMMEL - ML 1034
MICROGARD - MGL9549
MIGHTY - M2016
MILEGUARD - MO9549
MOBIL - L45515
MOTORCRAFT - FL 2016, FL 2016W, FL-2016
NAPA - 7312, 7313, 7314, 7323
PARTS MASTER - 67314
PARTS PLUS - LP2017
PERFORMAX - PO-170
PROMOTIVE - PH5526, SL45526
PUROLATOR - L45515, L45526
QUAKER STATE - PO-156
RACOR - PFL2016, R20-16L
SECURITY - CH-9549
SHELL - SH57
SILVERLINE - 27312
STP - S9549
VALVOLINE - VO81
WIX - 57311, 57312, 57313, 57314, 57314MP, 57323
K&N Pro-Series Oil Filter PS-7009133282.00
The KandN Pro-Series Oil Filter PS-7009 for your 2003-2010 Ford 6.0L/6.4L Powerstroke has been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Pro Series Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Pro Series oil filters provide outstanding filtration and engine protection throughout their service life.
They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. KandN Pro Series Oil Filters are available for canister and cartridge type oil filter applications.
Provides Outstanding Filtration
High Flow Filter For Improved Performance
Designed For Both Synthetic and Conventional Oils
Premium Filtration Media For Increased Capacity
Part PS-7009 Product Specifications
Anti Drain Back Valve: No
Bypass Valve: No
Filter Material: High Flow Premium Media
Gasket Material: Viton
Height: 7.094 in (180 mm)
Outside Diameter: 3.281 in (83 mm)
Thread Specification: N/A
Inside Diameter: 1.625 in (41 mm)
Weight: 0.41 lb (0.19 kg)
Racor PFL2016 ParFit Oil Filter291052.00
The Racor PFL2016 ParFit Oil Filter is a direct replacement for your 2003-2010 Ford 6.0L/6.4L Powerstroke. Racor ParFit oil filters protect expensive engine components from contaminants that can cause premature engine wear. ParFit filters are engineered and manufactured to meet stringent quality requirements and OEM (Original Equipment Manufacturer) specifications for correct fit, long service life, and performance.
Racor is the OEM supplier of this filter element to Ford and Navistar. This filter doesn't just meet OEM standards, it is the OEM standard.
Factory Replacement Filter
Cartridge Only - No Lid Included
Cross Reference#: FL-2016, 3C3Z-6731-AA, 1840752C91, CH9549
Racor RK31821 ParFit Replacement Oil Filter Lid291172.00
The Racor RK31821 ParFit Replacement Oil Filter Lid for your 2003-2010 Ford 6.0L/6.4L Powerstroke is a direct replacement for your factory Oil Filter Lid. Some aftermarket Oil Filters require removal of the factory lid and replace it with a different aftermarket version. Often times, these aftermarket lids are not intended to be reused with a factory filter. Eliminate the potential for any issues by using the right part, the first time. All Racor components are engineered and manufactured to meet all stringent quality requirements and OEM specifications for correct fit, long service life, and outstanding performance.
Racor is the OE supplier to Ford on this Filter Cap. It doesn't just meet OEM standards, it is the OEM standard.
For 6.4L/6.0L Oil Filters
Ford OE Cross Reference #: 3C34-9G270-BB
XDP 6.0L/6.4L Billet Oil Filter Cap XD265346101.00
Add some style and function under the hood of your 2003-2010 Ford 6.0L and 6.4L Powerstroke with the XDP 6.0L/6.4L Billet Oil Filter Cap XD265. Not just a dress-up part, XDP’s Oil Filter Cap features a durable aluminum construction, and is a direct replacement for the factory cap that becomes damaged and brittle with age. Each cap comes ready to install with a durable black coating, o-ring seal, and a convenient pre-drilled and tapped 1/8" NPT port for an external temp or pressure sensor. Features: Direct Replacement CapBillet Aluminum ConstructionPre-Drilled and Tapped 1/8" NPT Port 1-Year Warranty
Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit. Click Here for full warranty policy.