Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Alliant AP0077 Fuel Injector Harness Tool 28310 1.00 Alliant AP0077 Fuel Injector Harness Tool
1 5 1
$ 185.97
The Alliant AP0077 Fuel Injector Harness Tool has been specially designed for your 2008-2010 Ford 6.4L Powerstroke. A must have in the toolbox of any shop owner or Powerstroke technician. This tool is designed to safely disconnect the fuel injector harness. Features: Fuel Injector Harness Tool Fits 2008-2010 Ford 6.4L and 2008-2014 Navistar MaxxForce 7
Alliant AP0085 Injector Brush Kit 26652 1.00 Alliant AP0085 Injector Brush Kit
$ 54.26
The Alliant AP0085 Injector Brush Kit is a must have item in the toolbox of any Ford Powerstroke or Duramax technician. The Alliant Injector Brush Kit provides you with the proper tools to clean the injector bore and seat while installing new injectors in your engine. Features:Cleans Injector Bore and Injector SeatFits 6.0L/6.4L and 6.7L Powerstroke, Duramax Engines and More (see below)Application Note:2003-2016 Ford 4.5L, 6.0L, 6.4L, 6.7L Powerstroke Engines2003-2014 Navistar VT365, VT275, MaxxForce 5 and 72001-2016 GM 6.6L Duramax
Alliant AP64800 New 6.4L Injector By PurePower Technologies 50002 1.60 Alliant AP64800 New 6.4L Injector By PurePower Technologies
$ 361.22
When it's time to replace the injectors in your 2008-2010 Ford 6.4L Powerstroke, turn to the Alliant AP64800 New 6.4L Injector By PurePower Technologies. Alliant and PurePower Technologies come together to bring only the highest quality new replacement injector to the market. PurePower Fuel Injectors have years of research and development behind them - with over 17 years of product design and manufacturing experience.Each injector is assembled using 100% virgin material, a precision-matched control valve and spool to minimize oil leakage, and the matched intensifier body and plunger helps to eliminate fuel dilution. An advanced end-of-line test checks delivery, leakage, and opening characteristics which has resulted in less than 0.2 percent warranty rate! This new 6.4L Injector is backed by a 3 year unlimited mileage warranty and includes new O-rings and injection line.Features:New InjectorStock HorsepowerPurePower Part# 6903-PPIncludes O-Rings and Injection Line3 Year Unlimited Mileage WarrantyReplaces OE Part#: 1875702C91, 1873422C93, 5010666R91, 8C3Z9E527DRMApplications:2008-2010 Ford F-250/F-350-F-450/F-5502008-2010 MaxxForce 7Int. 3200, 4100, 4300, 4300LP2008-2010 Terrastar Trucks
Alliant AP64900 Remanufactured 6.4L Injector By PurePower Technologies 14398 1.60 Alliant AP64900 Remanufactured 6.4L Injector By PurePower Technologies
$ 277.66
Restore factory performance to your 2008-2010 Ford 6.4L Powerstroke with the Alliant AP64900 Remanufactured 6.4L Injector By PurePower Technologies. Alliant Power and PurePower Technologies have joined together to bring you the highest quality options for remanufactured injectors. PurePower Fuel Injectors are built to exceed OE specifications and are backed by many years of development, and manufacturing experience. With less than a 0.2% warranty rate, you can be assured that you're getting the right form, fit, and function. PurePower Technologies extensive remanufacturing process includes many upgrades to provide you the ultimate in reliability and performance. Each injector also gets new connectors, o-rings, hardware, and springs and the nozzle is flow tested to like-new performance. Alliant Power prides themselves on offering OEM quality, without the OEM price. This keeps factory components as the preferred replacement part in your Powerstroke engine. Sold individually.Features: Remanufactured Stock Horsepower Alliant Part# AP64900PurePower Part# 6920-PP 24-Month Unlimited Mileage WarrantyReplaces OE Part#: 1873422C93, 4307381R91, 4307369R91, 5010359R93, 8C3Z9E527A, 8C3Z9E527DRM, 1843089C91, 1843481C95, 1845879C91, 6718-JS, 5010666R91Applications:Ford F-250/350/450/550Ford 6.4L Powerstroke (Model Year 2008-2010)MaxxForce 7 (Model Year 2008-2010)International 3200, 4100, 4300, 4300LPTerrastar Trucks (Model Year 2007-2010)
Bostech DE003 Silver Series Remanufactured Fuel Injector 13107 5.00 Bostech DE003 Silver Series Remanufactured Fuel Injector
$ 249.95
The Bostech DE003 Silver Series Remanufactured Fuel Injector for your 2008-2010 Ford 6.4L Powerstroke is remanfuactured to the most stringent specifications to ensure functionality and longevity. Bostech's Silver Series 6.4L Fuel Injectors are 100% disassembled, then each component is inspected, polished, and certified to original specifications. All mating surfaces are lapped to a precision finish and then assembled and tested to OE quality, and performance. New o-rings and seals are installed before packaging. Features: Stock HP Level Sold Individually 13 Month Unlimited Mileage Warranty Replaces OE Part#: 8C3Z-9E527-A, CN5016RM, 1873422C93 4307381R91 4307369R91 5010359R93
Bostech DEC021229 Injector Line 32477 1.00 Bostech DEC021229 Injector Line
$ 29.95
Don't re-use the old injector lines in your 2008-2010 Ford 6.4L Powerstroke, replace them with the Bostech DEC021229 Injector Line. Replacing your injector lines is a critical step in replacing your injectors. Re-using old lines could cause contamination and damage to your new injectors. The Bostech Injector Line is a direct replacement for your factory line and is built to meet or exceed OE specifications. Features: Sold Individually Stock Replacement 13 Month Unlimited Mileage Warranty Replaces OE Part# 8C3Z-9229-A
Bostech ISK103 Injector Seal Kit 13061 1.00 Bostech ISK103 Injector Seal Kit
$ 9.95
Reseal vital engine components in your 2008-2010 Ford 6.4L Powerstroke with the Bostech Injector Seal Kit ISK103. Bostech Seals and Gaskets are made from high-quality materials that meet or exceed factory specifications. Features: Sold Individually 1 Kit Required Per Injector Meets Or Exceeds OE Specifications 13 Month Unlimited Mileage Warranty
DDP 64-100 100HP Remanufactured Injector Set (25% Over) 27449 14.60 DDP 64-100 100HP Remanufactured Injector Set (25% Over)
$ 3344
The DDP 64-100 100HP Remanufactured Injector Set (25% Over) for your 2008-2010 Ford 6.4L Powerstroke is intended for modified, high performance trucks. With an approximate 100hp increase, these injectors are best on trucks that tow light and have modified turbos. DDP upgraded injectors have been proven to work extremely well and far outlast the competitions remanufactured injectors. Sold as a balanced and matched set, these 25% over injectors provide enough fuel for roughly 650-700 RWHP. Use of a pyrometer is mandatory. Includes injector line set and backed by a 1-year unlimited mileage warranty. Features:25% OverIncludes Injector Line SetApproximately 100HP Increase For High Performance Applications 1-Year Unlimited Mileage
DDP 64-200 Remanufactured Injector Set (60% Over) 35063 14.60 DDP 64-200 Remanufactured Injector Set (60% Over)
$ 3828.5
The DDP 64-200 Remanufactured Injector Set (60% Over) for your 2008-2010 Ford 6.4L Powerstroke is intended for modified, high performance trucks. These injectors are best on trucks that tow light and have modified turbos, modified or dual injection pumps, and custom tuning. DDP upgraded injectors have been proven to work extremely well and far outlast the competitions remanufactured injectors. Sold as a balanced and matched set, these 60% over injectors provide enough fuel for roughly 800-850 RWHP with supporting modifications. Use of a pyrometer is mandatory. Includes injector line set and backed by a 1-year unlimited mileage warranty. Features:60% OverIncludes Injector Line SetSupports 800-850 RWHPFor High Performance Applications 1-Year Unlimited Mileage
DDP 64-300 Remanufactured Injector Set (100% Over) 35064 14.60 DDP 64-300 Remanufactured Injector Set (100% Over)
$ 3828.5
The DDP 64-300 Remanufactured Injector Set (100% Over) for your 2008-2010 Ford 6.4L Powerstroke is intended for modified, high performance trucks. These injectors require extensive custom tuning and dual high pressure injection pumps. DDP upgraded injectors have been proven to work extremely well and far outlast the competitions remanufactured injectors. These 100% over injectors provide enough fuel for roughly 925-1,000 RWHP with supporting modifications and are for off-road use only. Use of a pyrometer is mandatory. Includes injector line set and backed by a 1-year unlimited mileage warranty. Sold as a balanced and matched set upon completion of race waiver. Features:100% OverIncludes Injector Line SetSupports 925-1,000 RWHPFor High Performance Off-Road Applications 1-Year Unlimited Mileage
DDP 64-50 50HP Remanufactured Injector Set (15% Over) 27448 14.60 DDP 64-50 50HP Remanufactured Injector Set (15% Over)
$ 3344
The DDP 64-50 50HP Remanufactured Injector Set for your 2008-2010 Ford 6.4L Powerstroke increases performance, street manners and fuel economy. Sold as a direct replacement for your factory injectors, the 50HP set can be installed on stock applications and are capable of 600-625 RWHP. DDP upgraded injectors have been proven to work extremely well and far outlast the competitions remanufactured injectors. Includes injector line set and backed by a 1-year unlimited mileage warranty. Features: Improved Economy Great Street Manners Includes Injector Line SetApproximately 50HP Increase 1-Year Unlimited Mileage Warranty
DDP 64-615NZ 6 Hole 15% Over Nozzle Set 30176 1.20 DDP 64-615NZ 6 Hole 15% Over Nozzle Set
$ 631.75
The DDP 64-615NZ 6 Hole 15% Over Nozzle Set for your 2008-2010 Ford 6.4L Powerstroke is designed to increase power and performance on your truck. You can expect an additional 50-60 rear wheel horsepower after installation. These nozzles are perfect for anyone looking for improved performance or towing ability but not wanting to upgrade the rest of the fuel system or turbo components. It's not uncommon to see 0.5-1 mile per gallon improvement with these Nozzles installed. This product is perfectly safe on a stock or modified truck. Usage of a pryometer to monitor exhaust gas temperatures is always recommended. With additional modifications to the truck, even higher horsepower and fuel economy numbers have been achieved. Included with the Nozzle Set are 8 new injector sealing washers. As always, this product is covered by the DDP 1-year unlimited mileage warranty. Sold as a set. Features: 50-60 HP Increase Great For Towing and EfficiencyNote About Injector Hole Count: As a general rule of thumb, the more holes you have the smaller they will be, creating better atomization and a better burn. This means that the 6 hole injector nozzles will be more aggressive than the 7 hole nozzles. This makes the 6 hole nozzles ideal for higher horsepower trucks.
DDP 64-630NZ 6 Hole 30% Over Nozzle Set 30177 1.20 DDP 64-630NZ 6 Hole 30% Over Nozzle Set
$ 631.75
The DDP 64-630NZ 6 Hole 30% Over Nozzle Set for your 2008-2010 Ford 6.4L Powerstroke is designed to increase the power and performance of your truck. Intended primarily for performance applications with only light towing. It is your responsibility to ensure you have the appropriate modifications to take advantage of the fuel these nozzles can deliver without causing engine damage. Use of a pyrometer to monitor exhaust gas temperatures and installation of a modified or dual high pressure fuel pumps is highly recommended. Additional vehicle modifications should include (but are not limited to) Lift pump upgrade, upgraded turbochargers, custom tuning, head studs, etc.. included with the nozzle set are 8 new injector sealing washers. As always, this product is covered by the DDP 1-year unlimited mileage warranty. Sold as a set. Features: Supports About 675 RWHP Intended For High Performance and Light Towing Note About Injector Hole Count: As a general rule of thumb, the more holes you have the smaller they will be, creating better atomization and a better burn. This means that the 6 hole injector nozzles will be more aggressive than the 7 hole nozzles. This makes the 6 hole nozzles ideal for higher horsepower trucks.
DDP 64-660NZ 6 Hole 60% Over Nozzle Set 30178 1.20 DDP 64-660NZ 6 Hole 60% Over Nozzle Set
$ 631.75
The DDP 64-660NZ 6 Hole 60% Over Nozzle Set for your 2008-2010 Ford 6.4L Powerstroke is designed to increase power and performance on your truck. Intended for high perormance applications only, not recomended for vehicle towing frequently or heavy. It is your responsibility to ensure you have the appropriate modifications to take advantage of the fuel these nozzles can deliver without causing engine damage. Use of a pyrometer to monitor exhaust gas temperatures is mandatory. Additional vehicle modifications should include (but are not limited to) single modified or dual high pressure fuel pumps, lift pump upgrade, upgraded turbochargers, custom tuning, head studs, etc. Included with the nozzle set are 8 new injector sealing washers. Features: 60% Over Supports About 750 RWHP Note: Due to the size of this nozzle set it is highly recommended that the injectors are tested before and balanced after installation. If there are underlying issues with your injectors, it will only worsen after the nozzles are installed. Note About Injector Hole Count: As a general rule of thumb, the more holes you have the smaller they will be, creating better atomization and a better burn. This means that the 6 hole injector nozzles will be more aggressive than the 7 hole nozzles. This makes the 6 hole nozzles ideal for higher horsepower trucks.
DDP 64-PINSET Nozzle Alignment Pin Set 30164 1.00 DDP 64-PINSET Nozzle Alignment Pin Set
$ 28.5
The DDP 64-PINSET Nozzle Alignment Pin Set includes all 16 Nozzle Alignment Pins for your 2008-2010 Ford 6.4L Powerstroke. When removing the nozzle nut to replace nozzles, alignment pins will commonly shear off. Sold as a complete set only. Features: Replaces Sheared Pins Stock Replacement Sold As Set Only
DDP 64-SM Remanufactured Super Mental Injector Set 30165 14.60 DDP 64-SM Remanufactured Super Mental Injector Set
$ 4132.5
The DDP 64-SM Super Mental Injector Set is custom made for your 2008-2010 Ford 6.4L Powerstroke. This injector set is intended for use on 1100+ RWHP applications. For off-road use only, built to spec based on intended use and vehicle modifications. Heavy fuel delivery and smoke output will require extensive custom tuning. Starting off as remanufactured, each injector receives extensive modifications to flow more fuel. Dual high pressure injection pumps are mandatory. Sold as a balanced set only upon completion of race waiver. Includes injector line set.Features:Remanufactured For 1100+ RWHP Applications Custom Made To Your SpecificationsNote: Super Mental Series injectors are custom built to your specifications. When an order is received you will be contacted about the specifics of your truck, and the use of your truck. These injectors are custom built to order and may take several weeks to ship. No returns and no warranty. Not intended for street use.
DDP 64-SMNZ Super Mental Nozzle Set 30179 1.20 DDP 64-SMNZ Super Mental Nozzle Set
$ 774.25
The DDP 64-SMNZ Super Mental Nozzle Set is custom made for your 2008-2010 Ford 6.4L Powerstroke. The Super Mental Custom Nozzle Set is intended for 800+ RWHP applications. For off-road use only, built to spec based on intended use and vehicle modifications. DDP does not recommend installing nozzles without first testing health of used injectors and then balancing injectors as a set with new nozzles installed. Features: Custom Spec Nozzles For Applications 800+ RWHP Note: Super Mental Series Nozzles are custom built to your specifications. When an order is received you will be contacted about the specifics of your truck, and the use of your truck. These injector nozzles are custom built to order and may take several weeks to ship. No returns and no warranty. Not intended for street use.
DDP 64NEW Remanufactured Injector 27446 2.40 DDP 64NEW Remanufactured Injector
$ 356.25
Restore proper performance to your 2008-2010 Ford 6.4L Powerstroke with the DDP 64NEW Remanufactured Fuel Injector. Don’t just replace your failed injector with an off-the-shelf “Reman” that re-uses critical wearing parts. DDP’s Remanufactured Injectors feature all the latest revisions and all internal parts are replaced with brand new OE components. This gives you a high-quality remanufactured option that is backed by a 1-year unlimited mileage warranty.Features:Sold IndividuallyStock HP ReplacementIncludes New Injection Line1-Year Unlimited Mileage WarrantyRemanufactured With All New ComponentsNote: Warranty does not cover water contamination or cracked injectors caused by excessively high fuel rail pressures.
DTech DT640001R Remanufactured Fuel Injector 26406 1.00 DTech DT640001R Remanufactured Fuel Injector
$ 251.94
The DTech DT640001R Remanufactured Fuel Injector for your 2008-2010 Ford 6.4L Powerstroke is remanufactured to DTech's stringent specifications with several new components to ensure function and reliability. DTech checks all assembly and key characteristics including flow and response time to make sure they meet all of DTech's specifications. Injectors are sold individually. Core charges apply. Features: Remanufactured Stock Horsepower DTech Warranty: Consumer/Non-Professional Installers - 1 Year, Unlimited Mileage Warranty. Professional Shop / Automotive Truck Installers - 2 Years, Unlimited Mileage Warranty. This warranty applies to product used under normal operating conditions and service. Repairs, modification, disassembly or any other alteration of DTech products from their original condition are not covered by this warranty. Warranty will not be extended to failures caused by incorrect installation or application, modification, contamination, negligence or abuse. The warranty does not extend to diagnostic time, incidental or consequential damages.
TAKE 10% OFF SITEWIDE* WITH OUR MEMORIAL DAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: MEMORIAL10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 5/28/19 only.