Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Aeromotive 11802 130GPH Fuel Pump (Pump Only) 26825 20.00 Aeromotive 11802 130GPH Fuel Pump (Pump Only)
$ 1062.59
The Aeromotive 11802 Fuel Pump offers a true solution to Duramax, Cummins and Powerstroke owners looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel Pump addresses the common failure points and issues that have plagued the market for years. Filtration: The Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue. Shaft Seals and Pump Design: Like all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump. Extreme Climates: Aeromotive understands that some need their trucks in harsh environments. For the extreme cold, the Aeromotive 11802 features (2) 8-AN ports to allow engine coolant to warm the pump body. In addition, the pump is a completely sealed unit allowing it to get wet or be submerged without skipping a beat. Fuel Pressure: Unlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. The 11802 also comes standard with a pump mounted gauge so you can refine your pressure tuning without having to guess. Features: 130 GPH @ 10 PSI Pump Only (No Installation Kit) Ideal For Custom Applications Note: Quick-Connect fittings shown installed in pump are for display only. Pump fittings and installation kit are not included.
Aeromotive 11806 230GPH Fuel Pump (Pump Only) 29610 20.00 Aeromotive 11806 230GPH Fuel Pump (Pump Only)
$ 1313.77
The Aeromotive 11806 Fuel Pump offers a true solution to Duramax, Cummins and Powerstroke owners looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel Pump addresses the common failure points and issues that have plagued the market for years. Filtration: The Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue. Shaft Seals and Pump Design: Like all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump. Fuel Pressure: Unlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. Features: Race Pump 230 GPH @ 10 PSI Pump Only (No Installation Kit) Ideal For Custom Applications Note: Quick-Connect fittings shown installed in pump are for display only. Pump fittings and installation kit are not included.
Aeromotive 11807 130GPH Fuel System 26829 40.00 Aeromotive 11807 130GPH Fuel System
$ 1860.31
The Aeromotive 11807 Fuel System offers a true solution to any 2008-2010 Ford 6.4L Powerstroke owner looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel System addresses the common failure points and issues that have plagued the market for years. Filtration: The Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue. Shaft Seals and Pump Design: Like all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump. Extreme Climates: Aeromotive understands that some need their trucks in harsh environments. For the extreme cold, the Aeromotive 11801 features (2) 8-AN ports to allow engine coolant to warm the pump body. In addition, the pump is a completely sealed unit allowing it to get wet or be submerged without skipping a beat. Installation: Aeromotive has worked hard to make this an easy swap for your existing fuel pump that uses 1/2" lines quick-connect fittings. Aeromotive includes a steel zinc-plated bracket, hoses, pickup tube and all the components needed to complete this installation on your Super Duty pickup. Fuel Delivery: Aeromotive has addressed the 1/4 tank issues associated with aftermarket draw straws by including their patented and proven foam baffle technology borrowed from their Phantom systems. This baffle keeps fuel at the pickup point of the 3/4" draw straw and houses the 100 micron pre-filter and return line. By doing this, there is no need to drill a hole in the bottom of the tank or modify the filler neck. Fuel Pressure: Unlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design is more costly but provides more control over system pressures. The 11807 also comes standard with a pump mounted gauge so you can refine your pressure tuning without having to guess. Features: 130 GPH @ 10 PSI Self-Priming Retro-Fit Kit, Replaces Existing Fuel Pump In-Tank Baffle - Eliminates 1/4 Tank Issues
Aeromotive 11817 230GPH Fuel System 33353 30.00 Aeromotive 11817 230GPH Fuel System
$ 2111.49
The Aeromotive 11817 230GPH Fuel System offers a true solution to any 2008-2010 Ford 6.4L Powerstroke owner looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel System addresses the common failure points and issues that have plagued the market for years. Filtration: The Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue. Shaft Seals and Pump Design: Like all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump. Extreme Climates: Aeromotive understands that some need their trucks in harsh environments. For the extreme cold, the Aeromotive 11801 features (2) 8-AN ports to allow engine coolant to warm the pump body. In addition, the pump is a completely sealed unit allowing it to get wet or be submerged without skipping a beat. Installation: Aeromotive has worked hard to provide an easy installation for this fuel system. Featuring high-quality Delphi sealed weatherpack connectors, the plug and play wiring harness provides power to the pump with 10-gauge power and ground wires. Aeromotive includes a steel zinc-plated bracket, hoses, pickup tube and all the components needed to complete this installation on your Duramax pickup. Fuel Delivery: Aeromotive has addressed the 1/4 tank issues associated with aftermarket draw straws by including their patented and proven foam baffle technology borrowed from their Phantom systems. This baffle keeps fuel at the pickup point of the 3/4" draw straw and houses the 100 micron pre-filter and return line. By doing this, there is no need to drill a hole in the bottom of the tank or modify the filler neck. Fuel Pressure: Unlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. The 11801 also comes standard with a pump mounted gauge so you can refine your pressure tuning without having to guess. Features: 230 GPH @ 10 PSI Self-Priming Quick-Disconnect Fittings Complete Bolt-On and Plug-In Installation In-Tank Baffle - Eliminates 1/4 Tank Issues
AFE 42-13031 DFS780 Fuel System (Full-Time Operation) 30106 17.00 AFE 42-13031 DFS780 Fuel System (Full-Time Operation)
$ 835.05
The AFE 42-13031 DFS780 Fuel System with Full-Time Operation for your 2008-2010 Ford 6.4L Powerstroke offers you a complete fuel system solution for your Powerstroke pickup. The fuel in your truck contains contaminants, water and air/vapor which reduces power and can cause damage to your injectors. The AFE DFS780 Fuel System features a patent-pending design capable of removing power-robbing entrained air, water and contaminants. The DFS780 ensures constant fuel availability for your engine, while improving throttle response and horsepower at all RPMs. Clear High-Impact Polycarbonate Sight Glass: Allows visual inspection of fuel. Helical Bronze Spur Gears: Bronze gears more forgiving of contaminants than steel gears. The Helical spur gear design runs quieter than straight cut gears. Billet 6061-T6 Aluminum Manifold: Eliminates porosity concerns with cast aluminum. "Marine Grade" Motor: Protected against dust intrusion and powerful water jets. Horsepower and Flow: The DFS780 can be used on a totally stock truck, it was engineered for modified vehicles. BSFC (Brake Specific Fuel Consumption) for most modern turbocharged diesel engines is about 0.36 lbs/HP/hr. Since #2 diesel weighs about 7 pounds/gallon, which gives us about 19.5 HP/gallon/hr. The DFS780 will flow enough fuel (at rated pressure) to support over 2000 HP. Plug and Play Installation: Supplied harness attaches directly to battery and utilizes Deutsch weather-proof connectors. No cutting or modifications of the stock fuel lines required. Vehicle can easily be returned to stock. Relay Controlled: The DFS780 is powered by your ignition and can be run independently or in parallel with the stock fuel pump. PEEK Bearing Wear Surfaces: The DFS780 spur gears ride on PEEK (Polyether Ether Ketone) bearing surfaces to reduce both noise and wear. Contoured CNC Machining Of Manifold Passages: Enhances flow through the manifold to reduce pressure drop due to flow restrictions. Direct Bolt-on Steel Mounting Bracket: Heavy duty bracket mounts to the frame and utilizes existing hole to secure. Fuel Pressure Gauge Port: 1/8 NPT port allows customer to attach an external pressure gauge to monitor fuel pressure. O.E Quality Viton Seals: Compatible with diesel and biodiesel fuels. Features: "Worry Free" 2 Year Warranty Built In The U.S.A
AFE 42-13032 DFS780 Fuel System (Boost Activated) 30107 17.00 AFE 42-13032 DFS780 Fuel System (Boost Activated)
$ 835.05
The AFE 42-13032 DFS780 Fuel System with Part-Time Boost Activated Operation for your 2008-2010 Ford 6.4L Powerstroke offers you a complete fuel system solution for your Super Duty pickup. The fuel in your truck contains contaminants, water and air/vapor which reduces power and can cause damage to your injectors. The AFE DFS780 Fuel System features a patent-pending design capable of removing power-robbing entrained air, water and contaminants. The DFS780 ensures constant availability for your engine, while improving throttle response and horsepower at all RPMs. Clear High-Impact Polycarbonate Sight Glass: Allows visual inspection of fuel. Helical Bronze Spur Gears: Bronze gears more forgiving of contaminants than steel gears. The Helical spur gear design runs quieter than straight cut gears. Billet 6061-T6 Aluminum Manifold: Eliminates porosity concerns with cast aluminum. "Marine Grade" Motor: Protected against dust intrusion and powerful water jets. Horsepower and Flow: The DFS780 can be used on a totally stock truck, it was engineered for modified vehicles. BSFC (Brake Specific Fuel Consumption) for most modern turbocharged diesel engines is about 0.36 lbs/HP/hr. Since #2 diesel weighs about 7 pounds/gallon, which gives us about 19.5 HP/gallon/hr. The DFS780 will flow enough fuel (at rated pressure) to support over 2000 HP. Plug and Play Installation: Supplied harness attaches directly to battery and utilizes Deutsch weather-proof connectors. No cutting or modifications of the stock fuel lines required. Vehicle can easily be returned to stock. Relay Controlled: The DFS780 is powered by your ignition and can be run independently or in parallel with the stock fuel pump. PEEK Bearing Wear Surfaces: The DFS780 spur gears ride on PEEK (Polyether Ether Ketone) bearing surfaces to reduce both noise and wear. Contoured CNC Machining Of Manifold Passages: Enhances flow through the manifold to reduce pressure drop due to flow restrictions. Direct Bolt-on Steel Mounting Bracket: Heavy duty bracket mounts to the frame and utilizes existing hole to secure. Fuel Pressure Gauge Port: 1/8 NPT port allows customer to attach an external pressure gauge to monitor fuel pressure. O.E Quality Viton Seals: Compatible with diesel and biodiesel fuels. Features: "Worry Free" 2 Year Warranty Built In The U.S.A
AFE 42-23021 DFS780 Pro Series Fuel Pump (Full-time Operation) 43374 16.00 AFE 42-23021 DFS780 Pro Series Fuel Pump (Full-time Operation)
$ 645.05
Supply your 2008-2010 Ford 6.4L Powerstroke with the cleanest fuel possible when you install the AFE 42-23031 DFS780 Pro Series Fuel Pump. Easily installed, the Pro Series Fuel Pump filters out water, contaminants, and air from your fuel, so your engine is always getting a consistent flow of the highest quality fuel possible. The Pro Series Fuel Pump is constructed from quality cast aluminum for increased durability and performance. A reusable water separator bowl collects water filtered from the fuel for monitoring and is easily emptied. The high efficiency fuel filter on the Pro Series Fuel Pump is made from clear glass which makes visual inspection simple. Features:Easily InstalledQuality ConstructionCreates More Consistent Fuel FlowRemoves Dirt, Water, and Debris From Fuel
AFE 42-30001 DFS780 Max Universal Fuel Pump (10-20 PSI) 43378 14.00 AFE 42-30001 DFS780 Max Universal Fuel Pump (10-20 PSI)
$ 455.05
Add a lift pump to your vehicle that can process 187 GPH when you pick up the AFE 42-30001 DFS780 Max Universal Fuel Pump (10-20 PSI). The Max Universal Fuel Pump features a high-pressure Viton seal, CNC machined manifold passages and heavy gauge wire harness to ensure improved throttle response. The Max Universal Fuel Pump has an externally adjustable pressure regulator to adjust output pressure (10-20 psi) and a built-in pressure port to easily measure fuel pressure. Installing the Max Universal Fuel Pump is simple and convenient with plug-n-play connections, rivet nuts and installation tool and requires no cutting or modifications to the stock fuel lines or fuel tank. Features:Easily InstalledQuality ConstructionImproved Throttle ResponseCreates More Consistent Fuel FlowDelivers Up To 187 Gallons Per Hour
AirDog A4SPBF170 100GPH Air/Fuel Separation System 27409 27.00 AirDog A4SPBF170 100GPH Air/Fuel Separation System
$ 620
The PureFlow AirDog A4SPBF170 100GPH Air/Fuel Separation System for your 2008-2010 Ford 6.4L Powerstroke provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel. The AirDog is lift pump and filter system, that enhances the fuel delivery to your engine with a commercial duty system. Your high performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air/vapor can cause galling and pitting of the injector barrel/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time! The Airdog works by pulling fuel from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation. Features: 100 GPH @ 10 PSI (Stock-500HP) Removes Air and Water From Fuel Increased Horesepower and Torque Optimized Engine Performance Improved Throttle Response Increased Fuel Economy Lifetime Limited Express Warranty
AirDog A4SPBF173 150GPH Air/Fuel Separation System 1885 27.00 AirDog A4SPBF173 150GPH Air/Fuel Separation System
$ 645
The PureFlow AirDog A4SPBF173 150GPH Air/Fuel Separation System for your 2008-2010 Ford 6.4L Powerstroke provides the most effective technology designed specifically to remove water, particulates, vapor and entrained air from the diesel fuel in your truck. The AirDog is a lift pump and filtration system, that enhances the fuel delivery to your engine with a commercial duty system. Your high performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air/vapor in the fuel system preventing your engine from producing maximum power and efficiency. Additionally, air/vapor can cause galling and pitting of the injector barrel/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time! The Airdog works by pulling fuel from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation. Features: 150 GPH @ 10 PSI (Stock-800HP) Removes Air and Water From Fuel Increased Horsepower and Torque Optimized Engine Performance Improved Throttle Response Increased Fuel Economy Lifetime Limited Express Warranty
AirDog II-4G A6SABF195 DF-200-4G Air/Fuel Separation System 30658 27.00 AirDog II-4G A6SABF195 DF-200-4G Air/Fuel Separation System
$ 795
The PureFlow AirDog II-4G A6SABF195 DF-200-4G Air/Fuel Separation System for your 2008-2010 Ford 6.4L Powerstroke is the next generation in the fuel delivery system, resulting in a long lasting, efficient and quiet lift pump. The compact AirDog II-4G provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel, all while increasing power and performance. The design of the patented AirDog II-4G features many innovative improvements for increased pump performance, less noise and less maintenance. The AirDog II-4G utilizes an intermediate pump shaft that moves the electric motor away from the fuel. This eliminates any potential for wet motors due to a damaged or leaking seal. The motors self-aligning capability requires less maintenance and increases the systems endurance, resulting in a longer pump life. The low amperage motor also provides longer drivability and contributes to a significant reduction in noise. AirDogŪ is proud to announce that the AirDog II-4GŪ is the quietest fuel system in the diesel market! Features: Preset @ 10 PSI Supports 800HP+ Flows 200 Gallons Per Hour Improved Throttle Response Smoother Idle and Acceleration
AirDog II-4G A6SABF494 DF-165-4G Air/Fuel Separation System 24699 27.00 AirDog II-4G A6SABF494 DF-165-4G Air/Fuel Separation System
$ 765
The PureFlow AirDog II-4G A6SABF494 DF-165-4G Air/Fuel Separation System for your 2008-2010 Ford 6.4L Powerstroke is the next generation in the fuel delivery system, resulting in a long lasting, efficient and quiet lift pump. The compact AirDog II-4G provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel, all while increasing power and performance. The design of the patented AirDog II-4G features many innovative improvements for increased pump performance, less noise and less maintenance. The AirDog II-4G utilizes an intermediate pump shaft that moves the electric motor away from the fuel. This eliminates any potential for wet motors due to a damaged or leaking seal. The motors self-aligning capability requires less maintenance and increases the systems endurance, resulting in a longer pump life. The low amperage motor also provides longer drivability and contributes to a significant reduction in noise. AirDogŪ is proud to announce that the AirDog II-4GŪ is the quietest fuel system in the diesel market! Features: Preset @ 10 PSI Supports 500HP-800HP Flows 165 Gallons Per Hour Improved Throttle Response Smoother Idle and Acceleration
AirDog II-4G A6SPBF266 DF-100-4G Air/Fuel Separation System 30666 27.00 AirDog II-4G A6SPBF266 DF-100-4G Air/Fuel Separation System
$ 724
The PureFlow AirDog II-4G A6SPBF266 DF-100-4G Air/Fuel Separation System for your 2008-2010 Ford 6.4L Powerstroke is the next generation in the fuel delivery system, resulting in a long lasting, efficient and quiet lift pump. The compact AirDog II-4G provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel, all while increasing power and performance. The design of the patented AirDog II-4G features many innovative improvements for increased pump performance, less noise and less maintenance. The AirDog II-4G utilizes an intermediate pump shaft that moves the electric motor away from the fuel. This eliminates any potential for wet motors due to a damaged or leaking seal. The motors self-aligning capability requires less maintenance and increases the systems endurance, resulting in a longer pump life. The low amperage motor also provides longer drivability and contributes to a significant reduction in noise. AirDogŪ is proud to announce that the AirDog II-4GŪ is the quietest fuel system in the diesel market! Features: Preset @ 10 PSI Supports Stock - 500HP Flows 100 Gallons Per Hour Improved Throttle Response Smoother Idle and Acceleration
AirDog R4SBF218 Raptor 4G 100GPH Pump 33656 17.00 AirDog R4SBF218 Raptor 4G 100GPH Pump
$ 454
Upgrade the fuel system in your 2008-2010 Ford 6.4L Powerstroke with the AirDog R4SBF218 Raptor 4G 100GPH Pump. The Raptor 4G improves fuel flow giving you the ability to support fuel system upgrades and other engine modifications. Using AirDog's 4G technology, this pump features a 4-bearing motor design with an intermediate shaft. This allows for self-alignment of the gerotor resulting in lower amp loads on the motor, while providing you with a quiet, long lasting, dependable fuel pump. Each kit includes plumbing, hardware, and required components for installation. Features: 100 GPH 4G Technology Gerotor Pump Design No Return Line Needed Lifetime Limited Express Warranty Built-In Adjustable Regulator (Preset @ 10 PSI) Note: This pump is designed to supply your existing fuel pump.
AirDog R4SBF221 Raptor 4G 150GPH Pump 33659 17.00 AirDog R4SBF221 Raptor 4G 150GPH Pump
$ 470
Upgrade the fuel system in your 2008-2010 Ford 6.4L Powerstroke with the AirDog R4SBF221 Raptor 4G 150GPH Pump. The Raptor 4G improves fuel flow giving you the ability to support fuel system upgrades and other engine modifications. Using AirDog's 4G technology, this pump features a 4-bearing motor design with an intermediate shaft. This allows for self-alignment of the gerotor resulting in lower amp loads on the motor, while providing you with a quiet, long lasting, dependable fuel pump. Each kit includes plumbing, hardware, and required components for installation. Features: 150 GPH 4G Technology Gerotor Pump Design No Return Line Needed Lifetime Limited Express Warranty Built-In Adjustable Regulator (Preset @ 10 PSI) Note: This pump is designed to supply your existing factory fuel pump.
BD-Power 1050316 Flow-Max Fuel Lift Pump 27764 11.00 BD-Power 1050316 Flow-Max Fuel Lift Pump
$ 725
The BD-Power 1050316 Flow-Max Lift Pump for your 2008-2010 Ford 6.4L Powerstroke is built with a proven gerotor design that flows 150 gallons per hour (GPH) that can supply your truck with enough fuel for more than 600 horsepower. This ultra quiet and compact Flow-Max lift pump utilizes vibration isolators along with aluminum brackets and stainless straps for quick and versatile mounting on the frame rail. No drilling is required! The fully modular design includes the addition of a water separator and high efficiency low-micron filters using non-proprietary cartridges that can be purchased at most auto parts retailers. The Flow-Max is an ideal replacement for the OEM pump which is known to fail at even stock horsepower levels. Protect your injection pump with the BD-Power Flow-Max Lift Pump. Kit includes all necessary hoses and mounting hardware for installation. Features: 150 GPH Supports 600+ HP Quiet, Compact and Durable Limited Lifetime Warranty (When Registered)Warranty Note:Standard 2-year, 48,000 mile warranty if pump is not registered. If pump is registered within 30 days, it will be covered by BD's Limited Lifetime Warranty.
FASS FA F16 095G Adjustable 95GPH Fuel Pump 27332 18.00 FASS FA F16 095G Adjustable 95GPH Fuel Pump
$ 540.55
The FASS FA F16 095G Adjustable 95GPH Fuel Pump for your 2008-2010 Ford 6.4L Powerstroke is designed to be the most versatile high performance fuel pump on the market that allows for adjustable fuel pressures to meet the demand of high performance Ford Powerstroke 6.4L applications. Manufactured with the same motor used in our Titanium Series pumps, this adjustable fuel pump is rated at 95 gallons of diesel fuel per hour and offers adjustable fuel pressure from 1-75 PSI to customize fuel delivery for race or competition diesel engines. To aid in proper performance we built in a boost compensation port, air pressure from your intake manifold raises fuel pressures while under full throttle, maintaining fuel pressure when it matters most. Features: Adjustable Fuel Pressure 1-75 PSI 95 GPH - Stock To Moderate Engines Improves Fuel Flow Boost Compensation Port Built In Fuel Pressure Gauge Port All Mounting Hardware Included
FASS FA F16 165G Adjustable 165GPH Fuel Pump 27333 18.00 FASS FA F16 165G Adjustable 165GPH Fuel Pump
$ 564.3
The FASS FA F16 165G Adjustable 165GPH Fuel Pump for your 2008-2010 Ford 6.4L Powerstroke is designed to be the most versatile high performance fuel pump on the market that allows for adjustable fuel pressures to meet the demand of high performance Ford Powerstroke 6.4L applications. Manufactured with the same motor used in our Titanium Series pumps, this adjustable fuel pump is rated at 165 gallons of diesel fuel per hour and offers adjustable fuel pressure from 1-75 PSI to customize fuel delivery for race or competition diesel engines. To aid in proper performance we built in a boost compensation port, air pressure from your intake manifold raises fuel pressures while under full throttle, maintaining fuel pressure when it matters most. Features: Adjustable Fuel Pressure 1-75 PSI 165 GPH - For Moderate To Extreme Engines Improves Fuel Flow Boost Compensation Port Built In Fuel Pressure Gauge Port All Mounting Hardware Included
FASS FAS F16 095G Signature Adjustable 95GPH Fuel Pump 50313 10.00 FASS FAS F16 095G Signature Adjustable 95GPH Fuel Pump
$ 583.3
Take the fuel system in your 2008-2010 Ford 6.4L Powerstroke to the next level when you add the FASS FAS F16 095G Signature Adjustable 95GPH Fuel Pump. Incredibly versatile, the 095G is engineered for performance and enables you to adjust the fuel pressure to the specifications you want. The FAS F16 095G is expertly engineered using quality materials and features Fass's innovative Whisper Technology. The FA Signature Series includes a 10 gauge wiring harness and a heavy duty electrical connector for increased durability and longer life.Features:95 GPHComplete KitIncreased Durability and LifeEasily Adjust Fuel PressureEngineered For PerformanceInnovative Whisper Technology
FASS FAS F16 165G Signature Adjustable 165GPH Fuel Pump 50312 10.00 FASS FAS F16 165G Signature Adjustable 165GPH Fuel Pump
$ 607.05
Make the fuel system in your 2008-2010 Ford 6.4L Powerstroke more reliable when you buy the FASS FAS F16 165G Signature Adjustable 165GPH Fuel Pump. The FA Signature Series includes a 10 gauge wiring harness and a heavy duty electrical connector for increased durability and longer life. The FAS F16 165G is expertly engineered using quality materials and features Fass's innovative Whisper Technology. Incredibly versatile, the 250G is engineered for performance and enables you to adjust the fuel pressure to the specifications you want.Features:165gphComplete KitIncreased Durability and LifeEasily Adjust Fuel PressureEngineered For PerformanceInnovative Whisper Technology