Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Auto Meter 5323 OBDII Splitter 34039 1.00 Auto Meter 5323 OBDII Splitter
$ 39.95
Use multiple OBDII devides with the Auto Meter 5323 OBDII Splitter. This low profile OBDII Signal Splitter / Pass Through allows for remote location of connections for OBDII products like the Auto Meter AirDrive, DashLink and Dash Control while providing an easy to access connection point for other onboard devices requiring access to the OBDII data stream. Features: OBDII Splitter Allows For Multiple OBDII Devices Compatible With Most 1996+ OBDII Vehicles
Diesel Turbo Lifesaver U1K Install Kit 34154 1.00 Diesel Turbo Lifesaver U1K Install Kit
$ 31.5
Use the Diesel Turbo Lifesaver U1K Install Kit to easily install the Diesel Turbo Lifesaver on your diesel pickup. The Diesel Turbo Lifesaver allows you to set an engine idle sequence to properly cool your turbocharger before engine shutdown. CM1E Turbo Timer Module is required for use and sold separately. Features: Installation Kit Works With CM1E Module (Sold Separately)Note: This wiring harness is for universal applications and may require cutting and splicing into the factory harness for installation.
Edge Products 98615 EAS 12V Power Supply Starter Kit 28096 1.00 Edge Products 98615 EAS 12V Power Supply Starter Kit
$ 40.55
The Edge Products 98615 EAS 12V Power Supply Starter Kit allows the Insight CS2 and CTS2 to work on vehicles that don't have an OBDII port! By connecting to a key-switch power and ground source, an Insight becomes a digital gauge display for anything that you want to monitor! With the separate purchase of the EAS system, you can monitor EGTs, pressure readings, temperature readings, and much more. Features: 12V Harness For Non-OBDII Applications Works With Edge Products Insight CS2 and CTS2
Edge Products 98616 EAS Control Kit 28097 1.00 Edge Products 98616 EAS Control Kit
$ 208.95
The Edge Products 98616 EAS Control Kit allows you to monitor EGT's and adds the power switch to control multiple accessories with an on/off digital power switch. The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS Power Switch is a tremendous new feature for truck owners! Customers can now hook up accessories like aftermarket lights, air compressors, etc. and engage them from the CTS/CTS2 device. Install the new switch and either use Edge's MyStyle software to name your accessory or with the CTS2 rename those accessories right from your device. The CTS2 comes with an all-new screen layout that can monitor up to 6 gauges and 4 rocker switches for the ultimate control. Take advantage of Edge's clean EAS daisy chain link system to turn your truck's tools on/off. Features: For CTS and CTS2 Add Power Switch Monitor EGT's Kit Includes: EAS Starter Kit EAS EGT Probe EAS Power Switch
Edge Products 98617 EAS Competition Kit 28098 2.00 Edge Products 98617 EAS Competition Kit
$ 364.95
The Edge Products 98617 EAS Competition Kit is the perfect option for those enthusiasts that want to maximize the use of their Edge Insight. The EAS Compeition Kit gives you the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners who have upgraded turbo or turbo's and other mods ,where the stock sensors just aren't enough anymore. This kit is ideal for trucks participating in dyno competitions, sled pulls, and drag racing. The EAS EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS 0-100 PSIg Boost Sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. Simply install this sensor, use MyStyle to set up the sensor, and have the ability to see what kind of boost you can build. Or maybe you are trying to fine tune your truck and need to install a drive pressure sensor or fuel pressure sensor the Edge 0-100 PSIg sensor is your answer. The EAS Temperature Sensor is a -40F to 300F 1/8 NPT sensor that will allow you to monitor things like Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Another great solution for those with aftermarket accessories. Additionally, Edge Products has updated their Data Logging Software to now export all data logs into a CSV (Excel) file to save and compare runs, view, graph and improve tuning. To view CSV data log files, you must use MyStyle software or export it from MyStyle software. These new releases make the Insight CS2 and CTS2 the industry leader in digital gauge/data logging for any enthusiast! Features: Fits Edge CS/CS2 and CTS/CTS2 Includes Multiple Sensors For Monitoring Vitals Kit Includes: EAS Starter Kit EAS EGT Probe EAS Universal 5 Volt EAS 0-100 PSig Pressure Sensor EAS -40F To 300F Temperature Sensor
Edge Products 98618 EAS Data Logging Kit 28099 3.00 Edge Products 98618 EAS Data Logging Kit
$ 676.95
The Edge Products 98618 EAS Data Logging Kit is the ultimate component kit for maximizing the use of your Edge Insight. This kits gives users the ability to monitor EGTs in two different locations, two 0-100 PSIg boost sensors, and two -40F to 300F temp sensors for unmatched monitoring. This kit is designed for truck owners who have upgraded turbo or turbo's, and other mods where the stock sensors just aren't enough anymore. Truck owners who use trucks for dyno competitions, sled pulls, and drag racing need this kit. Fine tuning these trucks can be difficult, but with the Edge Data Logging Kit you can log runs, view logs, and make adjustments as needed for maximum performance. The EAS EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS 0-100 PSIg Boost Sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. Simply install this sensor, use MyStyle to set up the sensor, and have the ability to see what kind of boost you can build. Or maybe you are trying to fine tune your truck and need to install a drive pressure sensor or fuel pressure sensor the Edge 0-100 PSIg sensor is your answer. The EAS Temperature Sensor is a -40F to 300F 1/8 NPT sensor that will allow you to monitor things like Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Another great solution for those with aftermarket accessories. Additionally, Edge Products has updated our Data Logging Software to now export all data logs into a CSV (Excel) file to save and compare runs, view, graph and improve tuning. To view CSV data log files, you must use MyStyle software or export it from MyStyle software. These new releases make the Insight CS2 and CTS2 the industry leader in digital gauge/data logging for any enthusiast! Features: For Edge CS2 and CTS2 Multiple Sensors For Data Logging Kit Includes: EAS Starter Kit (2) EAS EGT Probes (2) EAS Universal 5 Volt (2) EAS 0-100 Psig Pressure Sensor (2) EAS -40 To 300F Temperature Sensor
Edge Products 98620 EAS Expandable EGT Probe With Lead 31307 1.00 Edge Products 98620 EAS Expandable EGT Probe With Lead
$ 122.95
The Edge Products 98620 EAS Expandable EGT Probe With Lead allows you to monitor exhaust gas temperatures with your Edge Product CS, CTS, CS2 and CTS2. The Expandable designed allows you to add optional expandable accessories from Edge Products such as pressure and temp sensors. This re-designed version of the original EAS Starter Kit EGT Probe, is built with a 15" lead so that the EGT Probe can be easily replaced, or removed without needing to replace the cable or other electronics. Features: Measures Exhaust Gas Temperatures Fits CS, CTS, CS2 and CTS2 Monitors Expandable Design - Works With Edge Product EAS System
Edge Products 98920 EAS Replacement EGT Lead 31309 1.00 Edge Products 98920 EAS Replacement EGT Lead
$ 30.55
The Edge Products 98920 EAS Replacement EGT Lead is a replacement for the original lead that comes with the Edge Products 98620. Features: 15" Lead Replacement For 98620
Longhorn Fab 201043 OBDII Port Splitter 33713 2.00 Longhorn Fab 201043 OBDII Port Splitter
$ 54.99
The Longhorn Fab 201043 OBDII Port Splitter is the perfect solution to the common problem of multiple aftermarket electronics requiring use of the OBDII port. Instead of unplugging your digital gauges to hook up the laptop, the OBDII Port Splitter gives you the ability to have (2) connections at once. Features: Fits OBDII Vehicles Allows (2) OBDII Connections
TAKE 10% OFF SITEWIDE* WITH OUR MEMORIAL DAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: MEMORIAL10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 5/28/19 only.