Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Direct-Fit Hoses & Clamps

New Product Filters!
BD-Power 1046275 Intake Hose & Clamp Kit 12586 6.00 BD-Power 1046275 Intake Hose & Clamp Kit
$ 356.5
The BD-Power 1046275 Intake Hose and Clamp Kit is the easiest way to change the old, worn factory boots on your 01-04 GM 6.6L Duramax LB7. Nothing can put an end to a quarter mile pass or hill climb faster than a turbo hose that blows off. Now, you can eliminate this problem with the BD Hose and Clamp Kit. Featuring eye-catching, Nomex silicone hoses that can withstand over 100 PSI and are secured by rugged, spring-loaded, stainless steel T-bar clamps. Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel. Features: Nomex Hoses Can Withstand Over 100 PSI Rugged, Spring-Loaded Stainless T-Bar Clamps Direct Replacement For Factory Hoses Note: These hoses are for use with stock intercoolers or aftermarket intercoolers that utilize stock boots and tubes.
Dorman 904-130 Lower Intercooler Boot 29497 1.00 Dorman 904-130 Lower Intercooler Boot
$ 79.95
The Dorman 904-130 Lower Intercooler Boot for your 2001-2008 GM 6.6L Duramax is re-engineered from upgraded materials for increased durability, Dormans Intercooler Boot Kit ensures long-lasting performance. The textured, oil-resistant exterior prevents clamp slippage, reliably securing the Boot in place. Features: Upgraded Design For Increased Durability Corrosion Resistant Clamps For Long Life Replaces GM OE Part#: 15124211 Product Specifications: Color/Finish: Blue Inside Diameter (in): 3 In. Length (In): 4.71 In. Material: Silicon Maximum Operating Temperature (F): 248 Maximum Pressure Rating (psi): 65 Minimum Operating Temperature (F): -40 Outside Diameter (In): 3.3 In. Package Contents: 1 Tube, 2 Clamps
PPE 115900100 Silicone Elbow Coupling (GM 15061708) 33875 2.00 PPE 115900100 Silicone Elbow Coupling (GM 15061708)
$ 80.99
The PPE 115900100 Replacement Silicone Hose is designed as a direct replacement for your 2002-2004 GM 6.6L Duramax. Competitive and high performance applications can put huge stress on the factory hoses in your truck. PPE's hoses were designed to far exceed the quality of the OE components and will handle the rigors of increased pressure in racing and competition. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester reinforced fibers making them very tough. The Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures that they can withstand constant boost pressures from -76 degrees all the way to +437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will. PPEs Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application. Features: UV and Ozone Resistant 5-Ply, 6mm Wall Thickness Replaces GM Part# 15061708 Working Pressure: 70 PSI - BAR 4.8 Burst Pressure: 207 PSI - BAR 14.3 Note: Due to the 6mm wall thickness, hose clamps must be 1/2" larger diameter than hose ID for a proper fit. This hose cross references to GM Part# 15061708. Please confirm your application before ordering.
PPE 115900200 Silicone Elbow Coupling (GM 15124211) 33876 1.00 PPE 115900200 Silicone Elbow Coupling (GM 15124211)
$ 53.99
The PPE 115900200 Silicone Elbow Coupling is designed as a direct replacement for your 2002-2010 GM 6.6L Duramax. Competitive and high performance applications can put huge stress on the factory hoses in your truck. PPE's hoses were designed to far exceed the quality of the OE components and will handle the rigors of increased pressure in racing and competition. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester reinforced fibers making them very tough. The Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures that they can withstand constant boost pressures from -76 degrees all the way to +437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will. PPEs Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application. Features: UV and Ozone Resistant 5-Ply, 6mm Wall Thickness Replaces GM Part# 15124211 Working Pressure: 70 PSI - BAR 4.8 Burst Pressure: 207 PSI - BAR 14.3 Note: Due to the 6mm wall thickness, hose clamps must be 1/2" larger diameter than hose ID for a proper fit.
PPE 115900300 Silicone Elbow Coupling (GM 15034797) 33877 1.00 PPE 115900300 Silicone Elbow Coupling (GM 15034797)
$ 53.99
The PPE 115900300 Silicone Elbow Coupling is designed as a direct replacement for your 2001-2004 GM 6.6L Duramax. Competitive and high performance applications can put huge stress on the factory hoses in your truck. PPE's hoses were designed to far exceed the quality of the OE components and will handle the rigors of increased pressure in racing and competition. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester reinforced fibers making them very tough. The Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures that they can withstand constant boost pressures from -76 degrees all the way to +437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will. PPEs Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application. Features: UV and Ozone Resistant 5-Ply, 6mm Wall Thickness Replaces GM Part# 15034797 Working Pressure: 70 PSI - BAR 4.8 Burst Pressure: 207 PSI - BAR 14.3 Note: Due to the 6mm wall thickness, hose clamps must be 1/2" larger diameter than hose ID for a proper fit.
PPE 115900400 Silicone Coupling (GM 15198167) 33878 1.00 PPE 115900400 Silicone Coupling (GM 15198167)
$ 35.99
The PPE 115900400 Silicone Coupling is designed as a direct replacement for your 2002-2004 GM 6.6L Duramax. Competitive and high performance applications can put huge stress on the factory hoses in your truck. PPE's hoses were designed to far exceed the quality of the OE components and will handle the rigors of increased pressure in racing and competition. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester reinforced fibers making them very tough. The Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures that they can withstand constant boost pressures from -76 degrees all the way to +437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will. PPEs Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application. Features: UV and Ozone Resistant 5-Ply, 6mm Wall Thickness Replaces GM Part# 15198167 Working Pressure: 70 PSI - BAR 4.8 Burst Pressure: 207 PSI - BAR 14.3 Note: Due to the 6mm wall thickness, hose clamps must be 1/2" larger diameter than hose ID for a proper fit.
PPE 115910101 Silicone Hose & Clamp Kit 21937 10.00 PPE 115910101 Silicone Hose & Clamp Kit
$ 274.49
The PPE 115910101 Silicone Hose and Clamp Kit for your 2001 GM 6.6L Duramax LB7 are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Features: Working Pressure: 70 PSI Burst Pressure: 207 PSI UV and Ozone Resistant Handles High Pressures, Oil, Fuel and High Temps Kit Includes: 1 - 115900100 Hose 1 - 115900200 Hose 1 - 115900300 Hose 1 - 115900000 Hose 4 - 515300250 2.25"/2.5" Clamps (Range 78-70mm) 4 - 3.0" 515350300 Clamps (Range 92-84mm)
PPE 115910204 Silicone Hose & Clamp Kit 21938 10.00 PPE 115910204 Silicone Hose & Clamp Kit
$ 256.49
The PPE 115910204 Silicone Hose and Clamp Kit for your 02-04 GM 6.6L Duramax LB7 are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Features: Working Pressure: 70 PSI Burst Pressure: 207 PSI UV and Ozone Resistant Handles High Pressures, Oil, Fuel and High Temps Kit Includes: 1 - 115900100 Hose 1 - 115900200 Hose 1 - 115900300 Hose 1 - 115900400 Hose 4 - 515300250 2.25"/2.5" Clamps (Range 78-70mm) 4 - 3.0" 515350300 Clamps (Range 92-84mm)