Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Exhaust Manifolds & Up-Pipes

New Product Filters!
AFE 46-40024 BladeRunner Exhaust Manifolds 30793 26.00 AFE 46-40024 BladeRunner Exhaust Manifolds
$ 517.75
The AFE 46-40024 BladeRunner Exhaust Manifolds feature a bolt-on design and will increase power, performance, and exhaust flow in your 2001-2016 GM 6.6L Duramax. Machined Ports: These manifolds have both the inlet and the outlet ports machined to match the factory gaskets. This allows for maximum flow, without compromising gasket performance. Auxiliary Ports: An Exhaust Gas Temperature (EGT) probe port is incorporated into each manifold for easy installation of gauges or testing equipment. There are three additional cast in bosses provided to allow for alternate testing points. Hassle-Free Installation: These manifolds are compatible with the stock up-pipes, which allows the manifolds to be installed without having to remove the turbocharger down-pipe or the up-pipes. Features: CARB EO# D-550-36 Durable, Cast Ductile Iron Construction Outflows Factory Exhaust Manifolds By 6% Compatible With Factory Up-Pipes For Easy Install Eliminates Flow Restricting Pinch Of Factory Driver-Side Manifold Machined Ports and Gasket Matched Design Maximizes Exhaust Flow 1/8" NPT Ports For Exhaust Gas Temperature (EGT) Monitoring Manifold Mounting Hardware Included For Easy Installation Note: These exhaust manifolds do not include new gaskets. In some cases, factory gaskets can be re-used. New gaskets are available separately below (see related products).
BD-Power 1041460 Full Bore Exhaust Manifold 842 12.00 BD-Power 1041460 Full Bore Exhaust Manifold
4.5 5 10
$ 165
The BD-Power 1041460 Full Bore Exhaust Manifold will restore the balance to your engines exhaust flow, reduce cylinder load and reduce exhaust gas temperatures. The factory driver side exhaust manifold in your 01-10 Duramax is pinched down to allow for steering shaft clearance that isn't even required! As a result, your exhaust flow is significantly disrupted. The BD-Power Full Bore Exhaust Manifold addresses this issue by maintaining internal bore size. Made from high-silicon ductile iron, the Full Bore is a direct, bolt-in replacement for the factory manifold and is even drilled and tapped to accept the most popular EGT probes. Stock Exhaust Manifold: Only flows 80% of the passenger side manifold 3 cylinders only operate at 80% capacity and load others down No access to measure exhaust temperature BD-Power Exhaust Manfilold: Contaings Exhaust Temperature Probe Port Maintains consistent exhaust pressure and temperature on both sides of the engine Flow matches the passenger side manifold and balances the engines exhaust pressure. Manifold gaskets not included. Additional InformationInstall Sheet
BD-Power 1403802 Passenger Side Up-Pipe 31966 7.00 BD-Power 1403802 Passenger Side Up-Pipe
$ 373.75
The BD-Power 1403802 Passenger Side Up-Pipe is a direct replacement for your 2001-2004 GM 6.6L Duramax LB7, and an off-road, race upgrade on your 2004.5-2015 GM 6.6L Duramax LBZ/LMM/LML. The BD-Power Passenger Side Up-Pipe features a 304 stainless steel construction built with precision cast mounting flanges that eliminate exhaust tubing blowouts. The 304 stainless steel tubing also prevents loss of heat energy and does not corrode like aluminized steel or 409 stainless. The larger bore (1.8" ID) internally shielded 304 stainless steel bellows eliminate the restrictive 1.3" OE bellows maximizing exhaust energy to drive your turbocharger.?Features: 304 Stainless Steel Construction Increased Turbo Response With Lower EGT's Smooth Mandrel Bends Improves Exhaust Gas Flow Application Notes: Direct fit for 2001-2004 LB7 engines federal emissions (non-EGR). This Up-Pipe does not have an EGR riser so it is not a direct replacement on 2004.5+ models.
Dorman 674-731 Left Side Exhaust Manifold 29296 12.00 Dorman 674-731 Left Side Exhaust Manifold
$ 72.95
The Dorman 674-731 Left Side Exhaust Manifold is a direct replacement for your 2001-2016 GM 6.6L Duramax. This manifold features a "full bore" design that isn't kinked like the factory manifold on the 2001-2010 models. This makes it a popular upgrade for the earlier trucks as the increased flow will "balance" out the engine helping with throttle response and better overall performance. Features: Direct Fit Upgrade On 2001-2010 Duramax Trucks Replaces GM OE Part#: 12624684, 12637647, 97224587 2011-2015 LML Note: Because this is the factory manifold that comes on the 2011-2015 LML Duramax it is simply a replacement part for the LML and not an upgrade like the 2001-2010 trucks with the "kinked" exhaust manifold.
Dorman 674-736 Right Side Exhaust Manifold 29306 14.00 Dorman 674-736 Right Side Exhaust Manifold
$ 159.95
The Dorman 674-736 Right Side Exhaust Manifold is a direct replacement for your 2001-2016 GM 6.6L Duramax. More like a kit than a single part, Dorman Exhaust Manifolds include the necessary components for an easy installation. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience. Features: Direct Fit Quality Tested To Ensure Function Replaces GM OE Part#: 12624683, 97224586
GM 12624683 Passenger Side Exhaust Manifold 28414 10.90 GM 12624683 Passenger Side Exhaust Manifold
$ 207.69
The GM 12624683 Replacement Passenger Side Exhaust Manifold is a direct replacement for your 2001-2016 GM 6.6L Duramax. Over time, due to heat cycles and corrosion, the factory exhaust manifolds can crack or become damaged. This manifold is a factory replacement for your stock one. Gaskets not included. Features: OE Replacement Passenger Side (Right Hand Side)
GM 12637647 Updated Driver Side Exhaust Manifold 23830 9.90 GM 12637647 Updated Driver Side Exhaust Manifold
5 5 1
$ 91
The GM 12637647 Updated Driver Side Exhaust Manifold for your 2001-2016 GM 6.6L Duramax features a "full bore" unlike the factory exhaust manifold that is "kinked or dented" for additional clearance. The increased flow will "balance" the engine and provide increased spool-up, throttle response and better overall performance. This GM OE part is constructed to the same high quality standards as your factory exhaust manifold. Features: GM OE Exhaust Manifold Upgrade On 2001-2010 Duramax Trucks Application Note: Because this is the factory manifold that comes on the 2011-2016 LML Duramax it is simply a replacement part for the LML and not an upgrade like the 2001-2010 trucks with the "kinked" exhaust manifold. Exhaust manifold gasket not included.
GM 97188685 Exhaust Manifold To Up-Pipe Gasket 28380 1.00 GM 97188685 Exhaust Manifold To Up-Pipe Gasket
$ 9.75
The GM 97188685 Exhaust Manifold To Up-Pipe Gasket is a direct replacement for your 2001-2016 GM 6.6L Duramax. This gasket is commonly replaced when upgrading exhaust manifolds or up-pipes. Sold individually. Features: OE Replacement Seals Exhaust Manifold To Up-Pipe
GM 97192618 Exhaust Up-Pipe To Turbo Gasket 28852 1.00 GM 97192618 Exhaust Up-Pipe To Turbo Gasket
$ 9.15
The GM 97192618 Exhaust Up-Pipe To Turbo Gasket is a direct replacement for your 2001-2016 GM 6.6L Duramax. This gasket is commonly replaced when upgrading exhaust manifolds or up-pipes. Sold individually. Features: OE Replacement Seals Up-Pipe To Turbo
GM 97302261 LB7 Passenger Side Up-Pipe 28851 4.40 GM 97302261 LB7 Passenger Side Up-Pipe
$ 262.08
The GM 97302261 LB7 Passenger Side Up-Pipe is a direct replacement for your 2001-2004 GM 6.6L Duramax LB7. This genuine OE part is only a direct-fit for federal emissions LB7 models only as it does not have an EGR riser. Features: OE Replacement Passenger Side Up-Pipe For Federal Emissions LB7 Notes: Direct fit for 2001-2004 LB7 engines federal emissions (non-EGR). This Up-Pipe does not have an EGR riser so it is not a direct replacement on 2004.5+ models.
GM 98002804 Exhaust Manifold Gasket 23829 1.00 GM 98002804 Exhaust Manifold Gasket
$ 36.56
The GM 98002804 Exhaust Manifold Gasket is a factory replacement for your 2001-2016 GM 6.6L Duramax. Gaskets sold individually.
HSP 2" Replacement Passenger Side Up-Pipe 39943 3.00 HSP 2" Replacement Passenger Side Up-Pipe
$ 225
The HSP 2" Replacement Passenger Side Up-Pipe can be used as a heavy duty replacement for your 2001-2004 LB7 or an offroad upgrade for your 2004.5-2016 GM 6.6L Duramax. HSP uses heavy wall 304 stainless steel pipe along with heavy duty sleeved bellow for long lasting performance. Available in a raw finish or ceramic powder coat.Features:2" Diameter304 Stainless Steel ConstructionHeavy duty Sleeved BellowCeramic Powder Coat AvailableNote: Direct fit for 2001-2004 LB7 engines federal emissions (non-EGR). This Up-Pipe does not have an EGR riser so it is not a direct replacement on 2004.5+ models.
HSP 2" Replacement Up-Pipes 39940 13.00 HSP 2" Replacement Up-Pipes
$ 420
The HSP 2" Replacement Up-Pipes are an excellent high flow upgrade to replace the restrictive factory pipes on your 2001-2016 GM 6.6L Duramax. The 2" design not only increases flow and power, but also reduces EGT's! Heavy wall 304 stainless steel construction coupled with heavy duty sleeved bellows means these pipes can handle anything you can throw at them. Features:Direct Replacement2" 304 Stainless Steel ConstructionHeavy Duty Sleeved BellowsIncreased Power and Lower EGT'sNotes: Direct fit for 2001-2004 LB7 engines federal emissions (non-EGR). This Up-Pipe does not have an EGR riser so it is not a direct replacement on 2004.5+ models.
HSP Up-Pipe Support Plate 38444 4.00 HSP Up-Pipe Support Plate
$ 39.9
Upgrade the Up-Pipe Support Plate in your 2001-2005 GM 6.6L Duramax with the addition of the HSP Up-Pipe Support Plate. The Up-Pipe Support Plate is constructed from quality materials and adds extra reinforcement to your factory up-pipe riser which will help prevent leaking or a cracked bellow.Features:Quality ConstructionEnsures a Leak Free and Solid ConnectionProvides Your OEM Up-Pipe With Extra Reinforcement
MAHLE MS19398 Exhaust Manifold Gaskets 23835 1.00 MAHLE MS19398 Exhaust Manifold Gaskets
$ 20.21
Use the MAHLE MS19398 Exhaust Manifold Gaskets when installing exhaust manifolds on your 2001-2016 GM 6.6L Duramax. MAHLE Gaskets and seals are designed to meet the OEM specifications and standards. Featuring a multi-layered steel design, these MAHLE gaskets provide an affordable alternative to the OEM gaskets, while maintaining a perfect fit and seal. Features: Multi-Layered Steel Meets Or Exceeds OE Standards OE Cross Reference#: 97188684, 98002804
PPE 116111100 High-Flow Race Exhaust Manifolds with Up-Pipes 5569 38.00 PPE 116111100 High-Flow Race Exhaust Manifolds with Up-Pipes
5 5 1
$ 899.99
The PPE 116111100 High-Flow Race Exhaust Manifolds with Up-Pipes for your 2001-2016 GM 6.6L Duramax are designed to maximize power and flow characteristics in your truck. Featuring durable, high flow Up-Pipe bellows that are internally sleeved and aircraft grade with an increased inner diameter which all together increases flow by over 20%. The entire Manifold and Up-Pipe exhaust system is designed to lower exhaust gas temperatures, reduce drive pressure, and accelerate turbo spool-up while maintaining reliability. Features:Round pipe for twin turbo applicationsCast hi-sil moly iron high flow manifold constructionSignificant reduction in exhaust back pressuresFree flowing Stainless Steel Inner Liner BellowsStainless Steel 11-gauge .120-inch wall diameter Up-Pipes Built in bosses, pre-drilled and tapped 1/8" NPT for EGT gauge sensorApplication Notes:Direct fit for 2001-2004 LB7 engines federal emissions (non-EGR). This Up-Pipe does not have an EGR riser so it is not a direct replacement on 2004.5+ models.2007.5-2010 LMM Models require 116111810 LMM Modified Coolant Tube (see related items below)On 2015-2016 models, the passenger upper control arm has a heat shield. This heat shield will need to be modified and re-positioned to gain clearance for installation.
PPE 116111101 High-Flow Exhaust Manifolds with Up-Pipes 21925 20.00 PPE 116111101 High-Flow Exhaust Manifolds with Up-Pipes
4.667 5 3
$ 899.99
The PPE 11611100 High-Flow Exhaust Manifolds with Up-Pipes for your 2001-2016 GM 6.6L Duramax are designed to maximize power and flow characteristics in your truck. Featuring durable, high flow Up-Pipe bellows that are internally sleeved and aircraft grade with an increased inner diameter which all together increases flow by over 20%. The entire Manifold and Up-Pipe exhaust system is designed to lower exhaust gas temperatures, reduce drive pressure, and accelerate turbo spool-up while maintaining reliability. Kit comes complete with two PPE Manifolds, two PPE Up-Pipes, a PPE Down Pipe Support Bracket, premium quality PPE 304 Stainless Steel Manifold Gaskets and Up-Pipe Gaskets.Features:D-Pipes for single turbo applicationsCast hi-sil moly iron high flow manifold constructionSignificant reduction in exhaust back pressuresFree flowing Stainless Steel Inner Liner BellowsStainless Steel 11-gauge .120-inch wall diameter Up-Pipes Built in bosses, pre-drilled and tapped 1/8" NPT for EGT gauge sensorFitment Notes: Only fits NON-EGR off-road applications. 2007.5-2010 LMM Models require 116111810 LMM Modified Coolant Tube (see related items)These race manifolds are designed for closed course racing vehicles and are not to be used on the street. On 2015-2016 models, the passenger upper control arm has a heat shield. This heat shield will need to be modified and re-positioned to gain clearance for installation.
PPE 116111400 High-Flow Exhaust Manifolds with Up-Pipes 21934 43.00 PPE 116111400 High-Flow Exhaust Manifolds with Up-Pipes
$ 1121.99
The PPE 116111400 High-Flow Exhaust Manifolds with Up-Pipes for your 04.5-05 GM 6.6L Duramax LLY increase exhaust flow by 20 percent and are 50 state emissions legal. Designed to outlast your truck the manifolds are made from high-quality cast iron and the up pipes are made from stainless steel. Plus the aircraft grade Up-Pipe bellows are high-flow, internally sleeved, and have an increased inner diameter. Features: CARB E.O. D-701-1 Significant reduction in exhaust back pressure Free flowing Stainless Steel Inner Liner Bellows Stainless Steel 11-gauge .120-inch wall diameter Up-Pipes Built in bosses, pre-drilled and tapped 1/8" NPT for EGT gauge Application Guide: 2004.5-2005 GM 6.6L Duramax LLY (Federal Emissions)
PPE 116120000 Replacement Up-Pipes 27441 15.00 PPE 116120000 Replacement Up-Pipes
5 5 1
$ 269.99
The PPE 116120000 Replacement Up-Pipes for your 2001-2016 GM 6.6L Duramax increase flow, and reliability. Even a stock Duramax can produce high temperatures and pressures that cause OEM up pipes eventually fail from constant temperature and pressure fluctuation. PPE has taken the OEM replacement to a new level. PPE OEM Up-Pipes allow 53% greater flow over stock, and are a direct bolt-on to your factory manifolds. But unlike factory parts, PPE OEM Up-Pipes are manufactured from 11 gauge 304 stainless steel and include PPE's superior 304 stainless steel, internally-sleeved bellows that can take the abuse of high temperatures and pressures. Uses stock exhaust manifolds and hardware. Gaskets included. Features: Bolt-On Replacement (Non-EGR)For Use With Factory Exhaust Manifolds Faster Spool-Up and Increased Performance Significant Reduction In Exhaust Back Pressure Free-Flowing Stainless Steel Inner Liner Bellows 2001-2004 Federal Emissions LB7 CARB EO# D-701-20 Stainless steel 11-gauge .120-inch wall, 2-inch OD Up-Pipes Application Note: CARB EO# D-701-20 applies only to 2001-2004 LB7 Federal Emissions models. These race up-pipes do not retain the use of the EGR on 2004.5+ models. They are for off-road use only and will only work on non-EGR applications.
XDP Driver Side High-Flow Exhaust Manifold XD342 60328 12.00 XDP Driver Side High-Flow Exhaust Manifold XD342
$ 79.95
Replace the exhaust manifold in your 2001-2016 GM 6.6L Duramax with the XDP Driver Side High-Flow Exhaust Manifold XD342. The XD342 has an unrestricted high-flow design that eliminates the "dented" or "kinked" driver side exhaust manifold that comes factory equipped on the 2001-2010 GM 6.6L Duramax powered trucks. On the 2011-2016 LML models this manifold is a direct-replacement for the LML trucks as they already come with the high-flow style exhaust manifold. Each manifold features a durable cast construction and includes the gaskets and hardware needed for installation.Features:Direct ReplacementEliminates "Kinked" Manifold (2001-2010 Trucks)GM OE Cross Reference #: 12624684,12637647,97224587Application Notes:High-flow upgrade is only on 2001-2010 trucks. Some factory hardware and fasteners will be re-used during installation. This is a factory-style replacement on the 2011-2016 GM 6.6L Duramax LML. Warranty Info: Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit. Click Here for full warranty policy.