Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Direct-Fit Hoses & Clamps

New Product Filters!
BD-Power 1046277 Intake Hose & Clamp Kit 12588 3.00 BD-Power 1046277 Intake Hose & Clamp Kit
$ 201.25
BD-Power 1046277 Intake Hose and Clamp Kit is the easiest way to change the old, worn factory boots on your 01-04 GM 6.6L Duramax LB7. Nothing can put an end to a quarter mile pass or hill climb faster than a turbo hose that blows off. Now, you can eliminate this problem with the BD Hose and Clamp Kit. Featuring eye-catching, Nomex silicone hoses that can withstand over 100 PSI and are secured by rugged, spring-loaded, stainless steel T-bar clamps. Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel. Features: Nomex Hoses Can Withstand Over 100 PSI Rugged, Spring-Loaded Stainless T-Bar Clamps Direct Replacement For Factory Hoses Note: These hoses are for use with stock intercoolers or aftermarket intercoolers that utilize stock boots and tubes.
Dorman 904-130 Lower Intercooler Boot 29497 1.00 Dorman 904-130 Lower Intercooler Boot
$ 79.95
The Dorman 904-130 Lower Intercooler Boot for your 2001-2008 GM 6.6L Duramax is re-engineered from upgraded materials for increased durability, Dormans Intercooler Boot Kit ensures long-lasting performance. The textured, oil-resistant exterior prevents clamp slippage, reliably securing the Boot in place. Features: Upgraded Design For Increased Durability Corrosion Resistant Clamps For Long Life Replaces GM OE Part#: 15124211 Product Specifications: Color/Finish: Blue Inside Diameter (in): 3 In. Length (In): 4.71 In. Material: Silicon Maximum Operating Temperature (F): 248 Maximum Pressure Rating (psi): 65 Minimum Operating Temperature (F): -40 Outside Diameter (In): 3.3 In. Package Contents: 1 Tube, 2 Clamps
Mishimoto MMBK-DMAX-06BK Factory-Fit Boot Kit 17775 5.00 Mishimoto MMBK-DMAX-06BK Factory-Fit Boot Kit
$ 222.95
Mishimoto MMBK-DMAX-06BK Factory-Fit Boot Kit is built with DuraCore technology designed specifically for the 6.6L Chevrolet/GMC Duramax. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. As with all our products, this boot kit is protected by the Mishimoto lifetime warranty. Features: Direct Fit Replacement Durable, DuraCore Technology Constant Tension T-Bolt Clamps Fits Stock and Mishimoto Intercooler Specifications: Interior Material: 5 Layers of Heat-Resistant Embedded Fibers Exterior Material: Silicone Interior Layer: DuraCore Ext. Material Temp. Rating: 428 F Int. Layer Temp. Rating: 572 F Inner Diameter: Boot 1: 2.30 Boot 2: 3.00 Boot 3: 3.00 Outer Diameter: Boot 1: 2.70 Boot 2: 3.40 Boot 3: 3.40 Applications: 2006-2010 Chevrolet Silverado 2500 HD w/ 6.6L Duramax LBZ/LMM 2006-2010 Chevrolet Silverado 3500 HD w/ 6.6L Duramax LBZ/LMM 2006-2010 GMC Sierra 2500 HD w/ 6.6L Duramax LBZ/LMM 2006-2010 GMC Sierra 3500 HD w/ 6.6L Duramax LBZ/LMM Kit Includes: (3) Silicone Boots with DuraCore Technology (6) Constant Tension T-Bolt Clamps Limited Lifetime Warranty LIFETIME WARRANTY Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer. A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product. The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid. MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products. Accident Protection Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.
PPE 115900200 Silicone Elbow Coupling (GM 15124211) 33876 1.00 PPE 115900200 Silicone Elbow Coupling (GM 15124211)
$ 53.99
The PPE 115900200 Silicone Elbow Coupling is designed as a direct replacement for your 2002-2010 GM 6.6L Duramax. Competitive and high performance applications can put huge stress on the factory hoses in your truck. PPE's hoses were designed to far exceed the quality of the OE components and will handle the rigors of increased pressure in racing and competition. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester reinforced fibers making them very tough. The Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures that they can withstand constant boost pressures from -76 degrees all the way to +437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will. PPEs Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application. Features: UV and Ozone Resistant 5-Ply, 6mm Wall Thickness Replaces GM Part# 15124211 Working Pressure: 70 PSI - BAR 4.8 Burst Pressure: 207 PSI - BAR 14.3 Note: Due to the 6mm wall thickness, hose clamps must be 1/2" larger diameter than hose ID for a proper fit.
PPE 115900500 Silicone Coupling (GM 15188715) 33880 1.00 PPE 115900500 Silicone Coupling (GM 15188715)
$ 26.99
The PPE 115900500 Silicone Coupling is designed as a direct replacement for your 2004.5-2016 GM 6.6L Duramax. Competitive and high performance applications can put huge stress on the factory hoses in your truck. PPE's hoses were designed to far exceed the quality of the OE components and will handle the rigors of increased pressure in racing and competition. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester reinforced fibers making them very tough. The Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures that they can withstand constant boost pressures from -76 degrees all the way to +437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will. PPEs Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application. Features: UV and Ozone Resistant 5-Ply, 6mm Wall Thickness Replaces GM Part# 15188715 Working Pressure: 70 PSI - BAR 4.8 Burst Pressure: 207 PSI - BAR 14.3 Note: Due to the 6mm wall thickness, hose clamps must be 1/2" larger diameter than hose ID for a proper fit.
PPE 115900800 Silicone Coupling (GM 15102148) 33879 1.00 PPE 115900800 Silicone Coupling (GM 15102148)
$ 53.99
The PPE 115900800 Silicone Coupling is designed as a direct replacement for your 2006-2010 GM 6.6L Duramax LBZ/LMM. Competitive and high performance applications can put huge stress on the factory hoses in your truck. PPE's hoses were designed to far exceed the quality of the OE components and will handle the rigors of increased pressure in racing and competition. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester reinforced fibers making them very tough. The Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures that they can withstand constant boost pressures from -76 degrees all the way to +437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will. PPEs Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application. Features: UV and Ozone Resistant 5-Ply, 6mm Wall Thickness Replaces GM Part# 15102148 Working Pressure: 70 PSI - BAR 4.8 Burst Pressure: 207 PSI - BAR 14.3 Note: Due to the 6mm wall thickness, hose clamps must be 1/2" larger diameter than hose ID for a proper fit.
PPE 115910610 Silicone Hose & Clamp Kit 21940 10.00 PPE 115910610 Silicone Hose & Clamp Kit
$ 157.49
The PPE 115910610 Silicone Hose and Clamp Kit for your 2006-2010 GM 6.6L Duramax LBZ/LMM are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Features: Working Pressure: 70 PSI Burst Pressure: 207 PSI UV and Ozone Resistant Replaces Factory Couplers and ClampsHandles High Pressures, Oil, Fuel and High TempsKit Includes:1 - 115900500 Hose1 - 115900200 Hose1 - 115900800 Hose2 - 515300250 2.25"-2.5" Clamps (Range 78-70mm)4 - 515350300 3.0" Clamps (92-84mm)