Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
AFE 77-90007 AGD Digital Gauge Display Shift-On-The-Fly (SOTF) Switch Cable 43459 1.00 AFE 77-90007 AGD Digital Gauge Display Shift-On-The-Fly (SOTF) Switch Cable
$ 14.25
Add the AFE 77-90007 AGD Digital Gauge Display Shift-On-The-Fly (SOTF) Switch Cable for your 2011-2016 GM 6.6L Duramax LML. The AGD Advance Gauge Display Switch Cable allows you to seamlessly connect your AFE POWER AGD monitor to your ECU. Once connected to the ECU, the Advanced Gauge Display Switch Cable allows you to unlock the ability to use EFILive multi-position tunes and switch between settings directly on the monitor.Features:Easily InstalledFor Use With Multi-Position EFILive TunesConnects Directly To The OBDII Plug On The AGD Monitor
Auto Meter 5323 OBDII Splitter 34039 1.00 Auto Meter 5323 OBDII Splitter
$ 39.95
Use multiple OBDII devides with the Auto Meter 5323 OBDII Splitter. This low profile OBDII Signal Splitter / Pass Through allows for remote location of connections for OBDII products like the Auto Meter AirDrive, DashLink and Dash Control while providing an easy to access connection point for other onboard devices requiring access to the OBDII data stream. Features: OBDII Splitter Allows For Multiple OBDII Devices Compatible With Most 1996+ OBDII Vehicles
BD-Power 1030710 2Low UnLoc 32301 1.00 BD-Power 1030710 2Low UnLoc
$ 148
The BD-Power 1030710 2Low UnLoc provides your 2001-2014 GM 2500HD/3500HD with the option of low range in 2WD! The 2Low Unloc is designed to allow the operator to manually disable the front wheel drive mechanism by holding the hubs in the free (2WD) mode with the transfer case in 4WD low range. By allowing the front wheels to be disengaged, maximum torque is available to the rear wheels. This will also allow for sharp All The Way Over turns without the front axle u - joint hopping or binding. With this kit installed, the front wheels will NOT be driven through the transfer case. This allows the operator to have full power and torque while in a high gear reduction applied to the rear axle only. Features: Enables Low Range 2WD Applies Maximum Torque To Rear Axle Only Applications: 2001-2014 GM 2500HD/3500HD 4WD 2001-2013 GM 1500 4WD
BD-Power 1036627 High Idle Kit 23134 2.00 BD-Power 1036627 High Idle Kit
$ 265
The BD-Power 1036627 High-Idle Kit for your 2007.5-2019 GM 6.6L Duramax works great with remote starters, PTO's and extended idling applications. Warm up your engine faster on cold mornings with BD Diesel's High Idle Kit. Quick and easy install, the High Idle switch mounts on the dashboard and plugs in under the dash. The rotating switch allows for adjustable high idle speeds - 900 / 1200 / 1500 / 1800 / 2100 RPM.Features: Quick and Easy Installation In-Cab Adjustable SwitchAdjustable High Idle Speeds
BD-Power 1057705 Throttle Sensitivity Switch 27504 1.00 BD-Power 1057705 Throttle Sensitivity Switch
5 5 1
$ 65
The BD-Power 1057705 Throttle Sensitivity Switch adds an external, on-the-fly control to the BD-Power Throttle Sensitivity Booster. This switch allows you to change settings quickly and easily without having to open the module and make adjustments. It also provides you with more level options. The normal module has two sensitivity levels. This add-on gives the driver multiple levels of sensitivity and in addition has both a valet mode and a ludicrous speed setting. The valet mode is perfect for modified vehicles as it allows the owner of the vehicle to reduce available power when allowing others to drive their vehicle. The ability to adjust the sensitivity level on the go is also helpful for driving in inclement road conditions where a lower responsiveness may be desired. Features: Adds On-The-Fly Adjustability Provides Multiple Levels Of Sensitivity Power Levels: Stock Low +50% Medium +75% High +100% Ludicrous +400% Valet Note: This switch will ONLY work on the 1057731, 1057732, 1057736, and 1057737 Throttle Sensitivity Booster. It WILL NOT work on the original, first generation Throttle Sensitivity Boosters (part number beginning in 105771).
BD-Power 1057727 Staging Limiter 21326 2.00 BD-Power 1057727 Staging Limiter
$ 450
Give the most power you can to your 2007.5-2019 GM 6.6L Duramax off the starting line with the BD-Power 1057727 Staging Limiter. Perfect for any racer, the Staging Limiter installs easily to give any driver the ability to control their Turbo Boost or Engine RPMs. By placing the control of the engine to the Staging Limiter, you can focus on what matters most; the accelerator. The perfect launches are achievable with the BD-Power 1057727 Staging Limiter. Once you discover the perfect Turbo Boost or Engine RPMs settings, the Staging Limiter allows you to divert all your attention to the brake and throttle while preparing to launch. Disengage your brake and your truck will launch with domination. Features: Easy InstallConsistent 1/4 Mile TimesEliminates Over and Under Boosted Launches
BD-Power 1057737 Throttle Sensitivity Booster 27516 1.00 BD-Power 1057737 Throttle Sensitivity Booster
5 5 2
$ 255
The BD-Power 1057737 Throttle Sensitivity Booster increases throttle sensitivity, and reduces that laggy pedal feeling in your 2007.5-2019 GM 6.6L Duramax. Modern vehicles utilize an accelerator pedal position sensor to control engine fueling. Many of these vehicles respond slowly and have poor throttle sensitivity. Much of this is actually caused by the factory programming within the ECM. The BD Throttle Sensitivity Booster corrects this by making the pedal more sensitive and making the vehicle more responsive. The Throttle Sensitivity Booster includes a wiring harness specially designed with factory style connections for a simple installation. With two modes to choose from, the Throttle Sensitivity Booster can be run on +50% and +100% modes. With the addition of the optional Push Button Switch Kit, the Throttle Sensitivity Booster will provide 6-levels of on-the-fly adjustability. Switch not included, see related products below. Features: Reduces Pedal Lag Quicker Turbocharger Spool-Up Instant Throttle Response Increase Installs Easily With Factory Connections Optional Switch Upgrade For More Levels (See Below) Applications: 2007-2019 GM Silverado/Sierra 1500/2500/3500 - All Engines 2007-2019 Cadillac Escalade 2007-2013 Chevy Avalanche 2007-2019 Chevy Suburban 2007-2019 GMC Yukon 2017-2019 Chevy Tahoe 2017 GMC Terrain
BD-Power 1081160 Cool Down Timer 2 848 1.00 BD-Power 1081160 Cool Down Timer 2
4 5 3
$ 200
The BD-Power 1081160 Cool Down Timer 2 eliminates the problems of shutting your engine down after a heavy haul when the exhaust gas temperature (EGT) is above normal. This can result in turbo bearing damage, but now you can protect your turbo with BDs Cool Down Timer (CDT). The CDT works with any K-Type EGT probe commonly found in most pyrometer gauge kits and has adjustable shut down temperature setting. Plus, five-minute timeout and quick shut down functions. The new design of the CDT adds increased troubleshooting ability and new installation features plus the ability to work with vehicle security alarms and in reducing regeneration of the DPF on 2008-up vehicles. Temperature shutoff requires the purchase of the EGT Probe (sold separately, see below). Features: Shut Down By Timer Shut Down By Temperature (Requires Probe) Avoid Turbocharger Damage Works With Any K-Type EGT Probe (Sold Separately, See Below) Application Note: Will not work on Push-Button start Ford Trucks.
Bully Dog 40400-105 Universal OBDII Block 25724 1.00 Bully Dog 40400-105 Universal OBDII Block
$ 34.84
The Bully Dog 40400-105 Universal OBDII Block fits the Bully Dog WatchDog and GT Tuner. It can also be used with the HandS Performance Mini Maxx and Black Maxx Tuners.
Bully Dog Sensor Station w/ Pyrometer Probe 40384 13754 2.00 Bully Dog Sensor Station w/ Pyrometer Probe 40384
$ 169.99
The Bully Dog Sensor Station is an add-on that allows you to read EGT's on your GT Tuner, PMT and Watchdog. Additional sensors such as thermocouples, speed sensors, boost sensors and liquid temperature sensors can also be added to monitor even more on your Bullydog Tuner! Note: Pyrometer probe is included, 40387 probe below is additional and not required unless replacement is needed or additional sensors are desired.
Edge Products 28857-D Amp'd Throttle Booster 34387 2.00 Edge Products 28857-D Amp'd Throttle Booster
$ 295.95
Reduce the laggy pedal feel in your 2007.5-2019 GM 6.6L Duramax with the Edge Products 28857-D Amp'd Throttle Booster. The Edge Products Amp'd Throttle Booster gives you a night and day difference in your driving experience. Designed for an easy installation, the Throttle Booster is an easy way to get a "seat of the pants" power increase that you won't find anywhere else. Decreasing pedal lag expedites your vehicle's performance curve to occur sooner and supplies quicker turbocharging spooling. Amp’d features an intuitive plug-and-play installation using your vehicle’s stock connections. What makes Amp’d even more fun? Settings are adjustable to boost throttle position signals by 50% or 100%. Add in the optional Amp'd switch today and take throttle sensitivity to the next level with an additional 4 settings!FeaturesQuicker Spool-Up Improved Throttle Sensitivity Reduces Laggy Pedal Feeling Optimized Driving For In-Town and Highway
Edge Products 28867-D Amp'd Throttle Booster with Switch 34394 2.00 Edge Products 28867-D Amp'd Throttle Booster with Switch
$ 356.95
Reduce the laggy pedal feel in your 2007.5-2019 GM 6.6L Duramax with the Edge Products 28867-D Amp'd Throttle Booster. The Edge Products Amp'd Throttle Booster gives you a night and day difference in your driving experience. Designed for an easy installation, the Throttle Booster is an easy way to get a "seat of the pants" power increase that you won't find anywhere else. Decreasing pedal lag expedites your vehicle's performance curve to occur sooner and supplies quicker turbocharging spooling. Amp’d features an intuitive plug-and-play installation using your vehicle's stock connections. What makes Amp’d even more fun? With the included Amp'd Throttle Booster switch, you get 6 total power levels! This gives you a complete user-controlled experience for any type of driving preference. Features:Quicker Spool-Up Push button control Improved Throttle Sensitivity Reduces Laggy Pedal Feeling Stock, Low-50%, Medium-75%, High-100%, Valet, and 400% "Wow Mode"
Edge Products 88800 Amp'd Throttle Booster Switch 34358 1.00 Edge Products 88800 Amp'd Throttle Booster Switch
$ 71.35
Add the Edge Products 88800 Amp'd Throttle Booster Switch to your Amp'd Throttle Sensitivity Booster for complete throttle control! The Amp'd switch enables 6 total power levels, as opposed to just 2 levels. The switch is a value-oriented upgrade that really creates a complete user-controlled experience for any type of driving preference.Features:6-modes Push button control Stock, Low-50%, Medium-75%, High-100%, Valet, and 400% "Wow Mode" Note: This switch works on 18852-D, 18854-D, 28855-D, 28856-D, 28857-D, 38851-D, and 38852-D Amp'd Throttle Sensitivity Boosters.
Edge Products 98609 EAS Power Switch w/ Starter Kit 19872 2.00 Edge Products 98609 EAS Power Switch w/ Starter Kit
$ 120.95
The Edge Products 98609 EAS Power Switch is an excellent upgrade for anyone that has or is planning to get an Edge Products CTS. This power switch wiring harness gives you the ability to install accessories such as lights or an air compressor and engage them from the CTS. Due to the easily customizable software you can name your accessory right on the screen and power your accesory right from your CTS Monitor. Features: Control Accessories From CTS Easy To Install and Operate Includes EAS Power Switch w/ Starter Kit
Edge Products 98615 EAS 12V Power Supply Starter Kit 28096 1.00 Edge Products 98615 EAS 12V Power Supply Starter Kit
$ 41.97
The Edge Products 98615 EAS 12V Power Supply Starter Kit allows the Insight CS2 and CTS2 to work on vehicles that don't have an OBDII port! By connecting to a key-switch power and ground source, an Insight becomes a digital gauge display for anything that you want to monitor! With the separate purchase of the EAS system, you can monitor EGTs, pressure readings, temperature readings, and much more. Features: 12V Harness For Non-OBDII Applications Works With Edge Products Insight CS2 and CTS2
Edge Products 98616 EAS Control Kit 28097 1.00 Edge Products 98616 EAS Control Kit
$ 217.95
The Edge Products 98616 EAS Control Kit allows you to monitor EGT's and adds the power switch to control multiple accessories with an on/off digital power switch. The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS Power Switch is a tremendous new feature for truck owners! Customers can now hook up accessories like aftermarket lights, air compressors, etc. and engage them from the CTS/CTS2 device. Install the new switch and either use Edge's MyStyle software to name your accessory or with the CTS2 rename those accessories right from your device. The CTS2 comes with an all-new screen layout that can monitor up to 6 gauges and 4 rocker switches for the ultimate control. Take advantage of Edge's clean EAS daisy chain link system to turn your truck's tools on/off. Features: For CTS and CTS2 Add Power Switch Monitor EGT's Kit Includes: EAS Starter Kit EAS EGT Probe EAS Power Switch
Edge Products 98617 EAS Competition Kit 28098 2.00 Edge Products 98617 EAS Competition Kit
$ 379.95
The Edge Products 98617 EAS Competition Kit is the perfect option for those enthusiasts that want to maximize the use of their Edge Insight. The EAS Compeition Kit gives you the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners who have upgraded turbo or turbo's and other mods ,where the stock sensors just aren't enough anymore. This kit is ideal for trucks participating in dyno competitions, sled pulls, and drag racing. The EAS EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS 0-100 PSIg Boost Sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. Simply install this sensor, use MyStyle to set up the sensor, and have the ability to see what kind of boost you can build. Or maybe you are trying to fine tune your truck and need to install a drive pressure sensor or fuel pressure sensor the Edge 0-100 PSIg sensor is your answer. The EAS Temperature Sensor is a -40F to 300F 1/8 NPT sensor that will allow you to monitor things like Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Another great solution for those with aftermarket accessories. Additionally, Edge Products has updated their Data Logging Software to now export all data logs into a CSV (Excel) file to save and compare runs, view, graph and improve tuning. To view CSV data log files, you must use MyStyle software or export it from MyStyle software. These new releases make the Insight CS2 and CTS2 the industry leader in digital gauge/data logging for any enthusiast! Features: Fits Edge CS/CS2 and CTS/CTS2 Includes Multiple Sensors For Monitoring Vitals Kit Includes: EAS Starter Kit EAS EGT Probe EAS Universal 5 Volt EAS 0-100 PSig Pressure Sensor EAS -40F To 300F Temperature Sensor
Edge Products 98618 EAS Data Logging Kit 28099 3.00 Edge Products 98618 EAS Data Logging Kit
$ 704.95
The Edge Products 98618 EAS Data Logging Kit is the ultimate component kit for maximizing the use of your Edge Insight. This kits gives users the ability to monitor EGTs in two different locations, two 0-100 PSIg boost sensors, and two -40F to 300F temp sensors for unmatched monitoring. This kit is designed for truck owners who have upgraded turbo or turbo's, and other mods where the stock sensors just aren't enough anymore. Truck owners who use trucks for dyno competitions, sled pulls, and drag racing need this kit. Fine tuning these trucks can be difficult, but with the Edge Data Logging Kit you can log runs, view logs, and make adjustments as needed for maximum performance. The EAS EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS 0-100 PSIg Boost Sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. Simply install this sensor, use MyStyle to set up the sensor, and have the ability to see what kind of boost you can build. Or maybe you are trying to fine tune your truck and need to install a drive pressure sensor or fuel pressure sensor the Edge 0-100 PSIg sensor is your answer. The EAS Temperature Sensor is a -40F to 300F 1/8 NPT sensor that will allow you to monitor things like Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Another great solution for those with aftermarket accessories. Additionally, Edge Products has updated our Data Logging Software to now export all data logs into a CSV (Excel) file to save and compare runs, view, graph and improve tuning. To view CSV data log files, you must use MyStyle software or export it from MyStyle software. These new releases make the Insight CS2 and CTS2 the industry leader in digital gauge/data logging for any enthusiast! Features: For Edge CS2 and CTS2 Multiple Sensors For Data Logging Kit Includes: EAS Starter Kit (2) EAS EGT Probes (2) EAS Universal 5 Volt (2) EAS 0-100 Psig Pressure Sensor (2) EAS -40 To 300F Temperature Sensor
Edge Products 98620 EAS Expandable EGT Probe With Lead 31307 1.00 Edge Products 98620 EAS Expandable EGT Probe With Lead
$ 127.95
The Edge Products 98620 EAS Expandable EGT Probe With Lead allows you to monitor exhaust gas temperatures with your Edge Product CS, CTS, CS2 and CTS2. The Expandable designed allows you to add optional expandable accessories from Edge Products such as pressure and temp sensors. This re-designed version of the original EAS Starter Kit EGT Probe, is built with a 15" lead so that the EGT Probe can be easily replaced, or removed without needing to replace the cable or other electronics. Features: Measures Exhaust Gas Temperatures Fits CS, CTS, CS2 and CTS2 Monitors Expandable Design - Works With Edge Product EAS System
Edge Products 98653 EAS Shift-On-The-Fly Accessory 35690 1.00 Edge Products 98653 EAS Shift-On-The-Fly Accessory
$ 134.95
The Edge Products 98653 EAS Shift-On-The-Fly Accessory gives you the ability to change custom tunes on your Insight CS2 or CTS2 monitor while driving your 2011-2016 GM 6.6L Duramax. Producing the same voltage signals between 1v, 2v, 3v, 4v, and 5v that a conventional switch would, your Insight monitor now has even more utility while eliminating the need to drill a hole in your dashboard. Here is how it works:1. The EAS Shift-on-the-fly accessory, connected to your Insight CTS2, will control your tune levels for vehicles requiring a switch to control the power levels.2. Switching occurs by changing voltages between 1v, 2v, 3v, 4v, 5v. Most custom-tuned vehicles run within these parameters.3. Wire or plug the switch in just as you would your normal Shift-On-The-Fly (SOTF) or Driver-Selectable-Tuning (DST) switch. Then, flash the tune into your vehicle that enables the SOTF/DST functions.4. Enjoy changing your power levels right through the Insight CS2 or CTS2 screen!Features:No Additional Switches NecessaryChange Your Existing Custom Tunes On-The-Fly From Your Insight CS2 or CTS2Compatible with EZLYNK and EFIlive SOTF/DST Tuning That Utilizes Voltage Signals To Switch Tunes*Note: *To ensure compatibility with your SOTF/DST tunes, please contact us or check with your tune manufacturer.The Edge Products 98653 takes the place of having to add a separate Shift-On-The-Fly switch to your existing custom tunes. It does not convert your Insight into a custom tune downloader.