Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Direct-Fit Hoses & Clamps

New Product Filters!
AFE 46-20110A BladeRunner Replacement Coupling & Clamp Kit 29567 5.00 AFE 46-20110A BladeRunner Replacement Coupling & Clamp Kit
$ 229.9
The AFE 46-20110A BladeRunner Replacement Coupling and Clamp Kit for your 2011-2016 GM 6.6L Duramax is a replacement coupling kit for the AFE Intercooler Pipes in your truck. Reinforced Silicone: These coupler hose features 5-PLY reinforced high temperature material which meet or exceed SAEJ20 Standard. Coupler Hoses: Allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of connections coming apart or having your hard pipes or other equipment break. This kit contains heavy-duty 5-PLY couplings and high quality stainless steel spring loaded T-bolt clamps for strength. Features: 5-PLY reinforced high temp silicone couplers set Coupler hose allows for expansion, movement and vibration between two hard pipes. aFe replacement coupling kit Includes high quality stainless steel spring loaded T-bolt clamps Note: This kit works ONLY with AFE Intercooler Tube Kits 46-20114-B and 46-20112.
Mishimoto MMBK-DMAX-11HBK Factory-Fit Boot Kit 24819 5.00 Mishimoto MMBK-DMAX-11HBK Factory-Fit Boot Kit
$ 222.95
The Mishimoto MMBK-DMAX-11HBK Factory-Fit Boot Kit for your 2011-2015 GM 6.6L Duramax LML is a direct-fit silicone hot-side boot kit with built-in DuraCore technology designed specifically for the 6.6L LML Duramax. High-powered vehicles require high-performance products, which is why our boot kits are manufactured using DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. The Mishimoto boot kit maintains factory fitment and is protected by the signature Mishimoto Lifetime Warranty. Features: Direct-Fit Replacement Five Layers Of Silicone For Maximum Durability DuraCore Technology For Super Resistance To Heat, Pressure, Fuel and Oil Mishimoto Lifetime Warranty Specifications: Interior Material: 5-Layers Of Heat Resistant Embedded Fibers Exterior Material: Silicone Interior Layer: DuraCore Exterior Max Temperature: 428 F Interior Max Temperature: 572 F Inner Diameter: Boot 1: 2.30 Boot 2: 2.50 Boot 3: 3.00 Outer Diameter: Boot 1: 2.68 Boot 2: 2.88 Boot 3: 3.38 Factory Part Numbers: Pipe (with boots): 23122239 Boot #1: 15188715 Boot #2: AKE98909 Boot #3: 25869099 Note: This boot kit fits hot-side (driver side) only. Warranty: Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer. A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product.The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid. MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products. Accident Protection Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident. For all warranty claims, please contact Mishimoto.
PPE 115900500 Silicone Coupling (GM 15188715) 33880 1.00 PPE 115900500 Silicone Coupling (GM 15188715)
$ 26.99
The PPE 115900500 Silicone Coupling is designed as a direct replacement for your 2004.5-2016 GM 6.6L Duramax. Competitive and high performance applications can put huge stress on the factory hoses in your truck. PPE's hoses were designed to far exceed the quality of the OE components and will handle the rigors of increased pressure in racing and competition. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester reinforced fibers making them very tough. The Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures that they can withstand constant boost pressures from -76 degrees all the way to +437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will. PPEs Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application. Features: UV and Ozone Resistant 5-Ply, 6mm Wall Thickness Replaces GM Part# 15188715 Working Pressure: 70 PSI - BAR 4.8 Burst Pressure: 207 PSI - BAR 14.3 Note: Due to the 6mm wall thickness, hose clamps must be 1/2" larger diameter than hose ID for a proper fit.
PPE 115900900 Silicone Coupling (GM 25869099) 33883 1.00 PPE 115900900 Silicone Coupling (GM 25869099)
$ 53.99
The PPE 115900900 Silicone Coupling is designed as a direct replacement for your 2011-2016 GM 6.6L Duramax LML. Competitive and high performance applications can put huge stress on the factory hoses in your truck. PPE's hoses were designed to far exceed the quality of the OE components and will handle the rigors of increased pressure in racing and competition. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester reinforced fibers making them very tough. The Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures that they can withstand constant boost pressures from -76 degrees all the way to +437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will. PPEs Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application. Features: UV and Ozone Resistant 5-Ply, 6mm Wall Thickness Replaces GM Part# 25869099 Working Pressure: 70 PSI - BAR 4.8 Burst Pressure: 207 PSI - BAR 14.3 Note: Due to the 6mm wall thickness, hose clamps must be 1/2" larger diameter than hose ID for a proper fit.
PPE 115901000 Silicone Coupling (GM AKE98909) 33884 1.00 PPE 115901000 Silicone Coupling (GM AKE98909)
$ 53.99
The PPE 115901000 Silicone Coupling is designed as a direct replacement for your 2011-2016 GM 6.6L Duramax LML. Competitive and high performance applications can put huge stress on the factory hoses in your truck. PPE's hoses were designed to far exceed the quality of the OE components and will handle the rigors of increased pressure in racing and competition. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester reinforced fibers making them very tough. The Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures that they can withstand constant boost pressures from -76 degrees all the way to +437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will. PPEs Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application. Features: UV and Ozone Resistant 5-Ply, 6mm Wall Thickness Replaces GM Part# AKE98909 Working Pressure: 70 PSI - BAR 4.8 Burst Pressure: 207 PSI - BAR 14.3 Note: Due to the 6mm wall thickness, hose clamps must be 1/2" larger diameter than hose ID for a proper fit.
PPE 115901100 Silicone Coupling (GM CP0630R2) 12131 2.00 PPE 115901100 Silicone Coupling (GM CP0630R2)
$ 53.99
The PPE 115901100 Silicone Coupling is designed as a direct replacement for your 2011-2016 GM 6.6L Duramax LML. Competitive and high performance applications can put huge stress on the factory hoses in your truck. PPE's hoses were designed to far exceed the quality of the OE components and will handle the rigors of increased pressure in racing and competition. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester reinforced fibers making them very tough. The Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures that they can withstand constant boost pressures from -76 degrees all the way to +437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will. PPEs Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application. Features: UV and Ozone Resistant 5-Ply, 6mm Wall Thickness Replaces GM Part# CP0630R2 Working Pressure: 70 PSI - BAR 4.8 Burst Pressure: 207 PSI - BAR 14.3 Note: Due to the 6mm wall thickness, hose clamps must be 1/2" larger diameter than hose ID for a proper fit.
PPE 115911114 Silicone Hose & Clamp Kit 21941 10.00 PPE 115911114 Silicone Hose & Clamp Kit
$ 221.39
The PPE 115911114 Silicone Hose and Clamp Kit for your 2011-2016 GM 6.6L Duramax LML are constructed using Fluorocarbon lined, silicon rubber that is strengthened with five plies of Nomex fibers. This design results in a hose that resists fuel, oil, UV, ozone, as well as various other chemicals plus it has a burst rating of over 200 psi from negative 76 degrees to 437 degrees Fahrenheit. Simply put, these will be the last hoses and boots you will ever buy. Features: Working Pressure: 70 PSI Burst Pressure: 207 PSI UV and Ozone Resistant Handles High Pressures, Oil, Fuel and High Temps Kit Includes: 1 - 115900500 Hose 1 - 115901000 Hose 1 - 115900200 Hose 1 - 115901100 Hose 4 - 515300250 2.25"/2.5" Clamps (Range 78-70mm) 4 - 515350300 3.0" Clamps (Range 92-84mm)