Products Showing Parts for — {{ }}

No Results Showing Parts for — {{ }}
Part #: HSM342002

H&S Motorsports 342002 Single Turbo Kit

2008-2010 Ford 6.4L Powerstroke
Part #: HSM342002
Our Recommendations Compatible Products
Scroll to View More


The H&S Motorsports 342002 Single Turbo Kit for your 08-10 Ford 6.4L Powerstroke is designed to replace the factory compound turbocharger setup with a custom-built single turbo to provide not only a performance increase, but also to gain reliability over the factory units.

H&S Motorsports' turbochargers are built specifically for your application with the help from the professionals at Bell Turbo. Even with the amazing quick spool characteristics of this turbocharger, the high flow compressor wheel (64mm inducer) is still capable of supporting 550-650 WHP depending on other modifications. The efficiency of this turbocharger also shows when it comes to exhaust gas temperatures. During our testing we experienced an average of a 150 degree drop in peak exhaust gas temperatures when compared to the factory compound turbocharger setup. More power with less heat, you can't beat that!

One look at our components and you'll understand why our kit is the best on the market. From the cast elbow that was designed in-house to the laser cut mounting brackets, there was no expense spared during the development of this kit. All parts are included with the kit to make installation as simple as possible and it is even compatible with the OEM downpipe so that a cab-off installation is not a requirement (although cab removal can make installation easier in some cases).

Whether you're looking for a performance gain or just wanting something to replace the stock junk, this kit is a great solution for you. It will make your 6.4L Power Stroke run like it is supposed to!
Aftermarket ECM Calibration required. Contact your tuning provider to confirm compatibility.


  • Compound Turbo To Single Conversion
  • Increased Power, Lower Temperatures
  • Compatible With OEM Downpipe 
  • Supports Up To 550-650 HP

Includes: HSM turbocharger, HSM cast turbo manifold, pedestal support bracket, compressor discharge pipe, oil feed supply line, silicone couplers, misc gaskets & seals, installation hardware. 

Warning: This product is not legal in the state of California. This product when used incorrectly may violate local, state, and federal laws pertaining to emissions, traffic, registration, and safety. Use of this product may damage or destroy mechanical and/or electrical components of this vehicle. Use of this product may void or nullify the vehicles factory warranty. User understands that motorsports are dangerous, and that installation of this product may subsequently require special driving skills or techniques to safely operate the vehicle.User assumes sole responsibility for the safe, proper, and legal use of the vehicle at all times.The purchaser and end user releases, indemnifies, discharges, and holds harmless H&S Motorsports, LLC from any and all claims, damages, causes of action, injuries, or expenses resulting from or relating to the use or installation of this product that is in violation of the terms and conditions on this page, the product disclaimer, and/or the product installation instructions. H&S Motorsports will not be liable for any direct, indirect, consequential, exemplary, punitive, statutory, or incidental damages or fines cause by the use or installation of this product.


  • MFG. Number 342002
  • Manufacturer Name H&S Motorsports
  • Shipping Weight 45.00 lb.
  • Shipping Length 14 in.
  • Shipping Width 16 in.
  • Shipping Height 10 in.


Be the first to rate this item!

Write Review

Customer Photos

Customer Photos

See what others built Submit your photo

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

Do you offer military discount ?
View Staff Answer 
Yes we do! Click Here
Xtreme Diesel Performance will only ship to the fifty U.S states and Canada which excludes all other international destinations.
What about the wastegate?
View Staff Answer 
H&S recommends using their universal wastegate kit (found HERE) which can be used on their 6.4 Single Turbo Kit. You will be required to fabricate your own wastegate outlet dump pipe in this configuration.
Emissions Notice

This product is not legal for sale or street use in California. Certain aftermarket products are subject to governmental emission standards regulated by the California Air Resources Board. In order for these products to be legal on a specific vehicle in California, the part number must receive a CARB Executive Order (EO) number. This number makes the part legal for use only on specific years, makes and models of vehicles. A decal with CARB EO number for these parts must be displayed in the engine bay to satisfy smog inspection requirements.