Products Showing Parts for — {{ }}

No Results Showing Parts for — {{ }}
USD 1828.42
Part #: II0470506028SHOSE

Industrial Injection Hot Rod VP44 Injection Pump (80HP-100HP)

1998.5-2002 Dodge 5.9L Cummins
Part #: II0470506028SHOSE
★★★★★ ★★★★★ 5 Reviews
Buy now, pay later using Affirm Logo during checkout.
Ships directly from the manufacturer

An Email Will Be Sent With Expected Shipping Date After Purchase

Accept Core Charge * VIEW CORE RETURN POLICY *
Our Recommendations Compatible Products
Scroll to View More


The Industrial Injection Hot Rod VP44 Injection Pump was designed to supply fuel to larger injectors in higher performance setups on your 1998.5-2002 Dodge Cummins. Industrial Injection has selected all of the most aggressive Factory OEM parts for maximum fuel delivery and timing advancement. This pump will develop an additional 80-100hp depending on the injectors you are running.

  • Remanufactured
  • 80HP-100HP Increase 
  • Built With New OEM Parts & Electronics
  • 1-Year Unlimited Mileage Warranty 
Application Notes: 
150 GPH Lift Pump or larger recommended.
120HP Race injectors or larger are required.
Wire tapping the pump with a performance module will void any and all warranty. 

Vehicle Applications

1998.5 Dodge 5.9L 24V Cummins
1999 Dodge 5.9L 24V Cummins
2000 Dodge 5.9L 24V Cummins
2001 Dodge 5.9L 24V Cummins
2002 Dodge 5.9L 24V Cummins


  • MFG. Number 0470506028SHO
  • Manufacturer Name Industrial Injection
  • Shipping Weight 21.00 lb.
  • Shipping Length 10 in.
  • Shipping Width 8 in.
  • Shipping Height 14 in.
  • Fuel Type Diesel
  • Warranty Yes
  • Warranty Info 1 Year / Unlimited Mileage
  • Prop 65 Prop 65 WarningWARNING: Cancer & Reproductive Harm -
  • Internal L0.00R0.00


★★★★★ ★★★★★
4.0/5 Stars out of 5 Reviews
Verified Buyer
Everything was great, took a little while for all the part to come in but with everything going on with the world. It'll happen! Thanks again!
Don’t get this alone
Having the hot rods pump, dual 4” exhaust, ram intake hood, K&N cold air intake, but most importantly the lift pump, and about to put injectors and fuel pressure gauge in. The pump is great but any pump without a lift pump will burn out on you, better to wait and buy everything before installing to make sure your investment stays running.
Had pump for just over a year. Only had 1200 miles on it when it went out. Fuel pump working great and Industrial Injection would not warranty. Save your money.
Pages 1   2

Write a Review

Include Your Order Number For a Chance to Win a $100 Gift card

Overall Rating

Your Information

Email Address will not be made public.

Customer Photos

Customer Photos

See what others built Submit your photo

Questions and Answers

Can I use with smarty programmer?
View Staff Answer 

The Industrial Injection VP44 Hot Rod Fuel Pump (80-100hp) can certainly be used along with the Smarty programmer.

Is there a core charge on this item?
View Staff Answer 

Yes, a $400.00 Core Charge.

Can i run the timing with the smarty programmer Will there be to much timing when i run lvl 10 with timing with the hotrod pump will I blow a head gasket
View Staff Answer 
Yes you can run the INDUSTRIAL INJECTION VP44 HOT ROD FUEL PUMP (80-100HP) in conjunction with a Smarty programmer (with timing) without any negative effects.
will this void the warranty if i tap it with my edge juice with attitude
View Staff Answer 

Yes, the warranty on the INDUSTRIAL INJECTION VP44 HOT ROD FUEL PUMP (80-100HP) will become void if the pump is tapped for use with a programmer.

Ask a question about this product

Please allow up to 1 business day for reply.

More to Consider

Recently Viewed


Emissions Notice

This product is not legal for sale or street use in California. Certain aftermarket products are subject to governmental emission standards regulated by the California Air Resources Board. In order for these products to be legal on a specific vehicle in California, the part number must receive a CARB Executive Order (EO) number. This number makes the part legal for use only on specific years, makes and models of vehicles. A decal with CARB EO number for these parts must be displayed in the engine bay to satisfy smog inspection requirements.