Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Auto Meter 5323 OBDII Splitter 34039 1.00 Auto Meter 5323 OBDII Splitter
$ 39.95
Use multiple OBDII devides with the Auto Meter 5323 OBDII Splitter. This low profile OBDII Signal Splitter / Pass Through allows for remote location of connections for OBDII products like the Auto Meter AirDrive, DashLink and Dash Control while providing an easy to access connection point for other onboard devices requiring access to the OBDII data stream. Features: OBDII Splitter Allows For Multiple OBDII Devices Compatible With Most 1996+ OBDII Vehicles
BD-Power 1081160 Cool Down Timer 2 848 1.00 BD-Power 1081160 Cool Down Timer 2
4 5 3
$ 200
The BD-Power 1081160 Cool Down Timer 2 eliminates the problems of shutting your engine down after a heavy haul when the exhaust gas temperature (EGT) is above normal. This can result in turbo bearing damage, but now you can protect your turbo with BDs Cool Down Timer (CDT). The CDT works with any K-Type EGT probe commonly found in most pyrometer gauge kits and has adjustable shut down temperature setting. Plus, five-minute timeout and quick shut down functions. The new design of the CDT adds increased troubleshooting ability and new installation features plus the ability to work with vehicle security alarms and in reducing regeneration of the DPF on 2008-up vehicles. Temperature shutoff requires the purchase of the EGT Probe (sold separately, see below). Features: Shut Down By Timer Shut Down By Temperature (Requires Probe) Avoid Turbocharger Damage Works With Any K-Type EGT Probe (Sold Separately, See Below) Application Note: Will not work on Push-Button start Ford Trucks.
Edge Products 98615 EAS 12V Power Supply Starter Kit 28096 1.00 Edge Products 98615 EAS 12V Power Supply Starter Kit
$ 41.97
The Edge Products 98615 EAS 12V Power Supply Starter Kit allows the Insight CS2 and CTS2 to work on vehicles that don't have an OBDII port! By connecting to a key-switch power and ground source, an Insight becomes a digital gauge display for anything that you want to monitor! With the separate purchase of the EAS system, you can monitor EGTs, pressure readings, temperature readings, and much more. Features: 12V Harness For Non-OBDII Applications Works With Edge Products Insight CS2 and CTS2
Edge Products 98616 EAS Control Kit 28097 1.00 Edge Products 98616 EAS Control Kit
$ 217.95
The Edge Products 98616 EAS Control Kit allows you to monitor EGT's and adds the power switch to control multiple accessories with an on/off digital power switch. The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS Power Switch is a tremendous new feature for truck owners! Customers can now hook up accessories like aftermarket lights, air compressors, etc. and engage them from the CTS/CTS2 device. Install the new switch and either use Edge's MyStyle software to name your accessory or with the CTS2 rename those accessories right from your device. The CTS2 comes with an all-new screen layout that can monitor up to 6 gauges and 4 rocker switches for the ultimate control. Take advantage of Edge's clean EAS daisy chain link system to turn your truck's tools on/off. Features: For CTS and CTS2 Add Power Switch Monitor EGT's Kit Includes: EAS Starter Kit EAS EGT Probe EAS Power Switch
Edge Products 98617 EAS Competition Kit 28098 2.00 Edge Products 98617 EAS Competition Kit
$ 379.95
The Edge Products 98617 EAS Competition Kit is the perfect option for those enthusiasts that want to maximize the use of their Edge Insight. The EAS Compeition Kit gives you the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners who have upgraded turbo or turbo's and other mods ,where the stock sensors just aren't enough anymore. This kit is ideal for trucks participating in dyno competitions, sled pulls, and drag racing. The EAS EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS 0-100 PSIg Boost Sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. Simply install this sensor, use MyStyle to set up the sensor, and have the ability to see what kind of boost you can build. Or maybe you are trying to fine tune your truck and need to install a drive pressure sensor or fuel pressure sensor the Edge 0-100 PSIg sensor is your answer. The EAS Temperature Sensor is a -40F to 300F 1/8 NPT sensor that will allow you to monitor things like Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Another great solution for those with aftermarket accessories. Additionally, Edge Products has updated their Data Logging Software to now export all data logs into a CSV (Excel) file to save and compare runs, view, graph and improve tuning. To view CSV data log files, you must use MyStyle software or export it from MyStyle software. These new releases make the Insight CS2 and CTS2 the industry leader in digital gauge/data logging for any enthusiast! Features: Fits Edge CS/CS2 and CTS/CTS2 Includes Multiple Sensors For Monitoring Vitals Kit Includes: EAS Starter Kit EAS EGT Probe EAS Universal 5 Volt EAS 0-100 PSig Pressure Sensor EAS -40F To 300F Temperature Sensor
Edge Products 98618 EAS Data Logging Kit 28099 3.00 Edge Products 98618 EAS Data Logging Kit
$ 704.95
The Edge Products 98618 EAS Data Logging Kit is the ultimate component kit for maximizing the use of your Edge Insight. This kits gives users the ability to monitor EGTs in two different locations, two 0-100 PSIg boost sensors, and two -40F to 300F temp sensors for unmatched monitoring. This kit is designed for truck owners who have upgraded turbo or turbo's, and other mods where the stock sensors just aren't enough anymore. Truck owners who use trucks for dyno competitions, sled pulls, and drag racing need this kit. Fine tuning these trucks can be difficult, but with the Edge Data Logging Kit you can log runs, view logs, and make adjustments as needed for maximum performance. The EAS EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS 0-100 PSIg Boost Sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. Simply install this sensor, use MyStyle to set up the sensor, and have the ability to see what kind of boost you can build. Or maybe you are trying to fine tune your truck and need to install a drive pressure sensor or fuel pressure sensor the Edge 0-100 PSIg sensor is your answer. The EAS Temperature Sensor is a -40F to 300F 1/8 NPT sensor that will allow you to monitor things like Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Another great solution for those with aftermarket accessories. Additionally, Edge Products has updated our Data Logging Software to now export all data logs into a CSV (Excel) file to save and compare runs, view, graph and improve tuning. To view CSV data log files, you must use MyStyle software or export it from MyStyle software. These new releases make the Insight CS2 and CTS2 the industry leader in digital gauge/data logging for any enthusiast! Features: For Edge CS2 and CTS2 Multiple Sensors For Data Logging Kit Includes: EAS Starter Kit (2) EAS EGT Probes (2) EAS Universal 5 Volt (2) EAS 0-100 Psig Pressure Sensor (2) EAS -40 To 300F Temperature Sensor
Edge Products 98920 EAS Replacement EGT Lead 31309 1.00 Edge Products 98920 EAS Replacement EGT Lead
$ 31.77
The Edge Products 98920 EAS Replacement EGT Lead is a replacement for the original lead that comes with the Edge Products 98620. Features: 15" Lead Replacement For 98620
Edge Products EAS 98106 OBDII Pass Through Splitter 80014 1.00 Edge Products EAS 98106 OBDII Pass Through Splitter
$ 39.95
The Edge Products EAS OBDII Pass-Through Splitter is a great new way to add more functionality to the OBD-II port on your vehicle. This pass-through splitter is fully pinned with all 16-pins found in a standard OBD-II port, and allows you to plug in two separate products such as an Edge CTS2 unit, and another product like power running boards or custom tuning devices. Features: OBD-II SplitterOne Male Plug And Two Female PlugsCompatible On Most OBD-II Vehicles 1996+1 Ft. Lead Cables From OBD-II Port to Female Plugs
Hypertech 101200 REACT Performance Throttle Optimizer 42820 1.00 Hypertech 101200 REACT Performance Throttle Optimizer
$ 329
Get a more exciting drive in your 2007-2018 Grand Cherokee at the touch of a dial with the Hypertech 101200 REACT Performance Throttle Optimizer. Featuring five modes, the REACT allows you to select between the Track, Sport, Street, Economy, and Stock settings. In addition to the REACT, Hypertech has developed the REACT Custom Tuning Software to fine tune the five modes already programmed in order to get the best performance possible. Featuring three levels of safety, the REACT sends continuous signals back and forth between the accelerator pedal and the microprocessor. If an issue is found in the signals, the REACT immediately enters a bypass mode and removes it's circuitry from the path to the ECU to ensure that you are always in control of your accelerator pedal. Features:Boosts PerformanceUltimate Customization of Your Throttle SettingsWorks With The REACT Custom Tuning SoftwareApplications:2007-2018 Grand Cherokee2007-2019 Wrangler (JK)
Hypertech 102200 REACT Tow Throttle Optimizer 42836 1.00 Hypertech 102200 REACT Tow Throttle Optimizer
$ 329
Make towing with your 2007-2018 Grand Cherokee easier than ever before with the Hypertech 102200 REACT Tow Throttle Optimizer. The REACT features Heavy Tow, Tow, Economy, Wet/Ice, and Stock modes that allow you to perfectly adjust your throttle settings to get the job done. The REACT Custom Tuning Software gives you the ability to adjust the five modes of the REACT even further and gives you the ability to completely customize the settings to your exact specifications. Never fear losing control of the REACT. Hypertech has engineered a three-level safety system that closely monitors all the signals being sent to and from the accelerator and the microprocessor. If an error is detected in the signals the REACT is programmed to disengage its circuitry from the ECU and enters a bypass mode to keep you in control of your vehicle. Features:Boosts PerformanceUltimate Customization of Your Throttle SettingsWorks With The REACT Custom Tuning SoftwareApplications:2007-2018 Grand Cherokee2007-2019 Wrangler (JK)
Hypertech 105200 REACT Off-Road Throttle Optimizer 42877 1.00 Hypertech 105200 REACT Off-Road Throttle Optimizer
$ 329
Ensure that the throttle in your 2007-2018 Grand Cherokee reacts perfectly to any driving surface you find with the Hypertech 105200 REACT Off-Road Throttle Optimizer. The REACT allows you to fine tune your throttle settings so you are getting the perfect performance. The REACT gives you the ability to switch between five different modes that help you react to different types of driving surfaces and driving styles. The REACT Custom Tuning Software places the ability to fine tune your throttles settings in your hands. The REACT has been programmed to include three levels of safety protection and closely monitors all signals going to and from the module and accelerator pedal. If an error is found within the microprocessor, the circuitry of the settings removes itself to ensure that you’re always in control of your throttle. Features:Boosts PerformanceUltimate Customization of Your Throttle SettingsWorks With The REACT Custom Tuning SoftwareApplications:2007-2018 Grand Cherokee2007-2019 Wrangler (JK)
Longhorn Fab 201043 OBDII Port Splitter 33713 2.00 Longhorn Fab 201043 OBDII Port Splitter
$ 54.99
The Longhorn Fab 201043 OBDII Port Splitter is the perfect solution to the common problem of multiple aftermarket electronics requiring use of the OBDII port. Instead of unplugging your digital gauges to hook up the laptop, the OBDII Port Splitter gives you the ability to have (2) connections at once. Features: Fits OBDII Vehicles Allows (2) OBDII Connections