Products Showing Parts for — {{ }}

No Results Showing Parts for — {{ }}
USD 569.25
Part #: LH200901-UNV-72

Longhorn Fab 200901-UNV-72 Traction Bars

Universal - 72" Long (Fits Most Short Bed Trucks)
Part #: LH200901-UNV-72
★★★★★ ★★★★★ 3 Reviews
Buy now, pay later using Affirm Logo during checkout.
Our Recommendations Compatible Products
Scroll to View More


The Longhorn Fab 200901-UNV-72 Traction Bars feature a universal fitment and can be installed on a wide range of applications. This kit is the perfect solution to putting traction bars on your truck. Almost all trucks have wheel hop issues right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, you're not getting traction!

Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition you'll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars.

  • Manufactured In The USA! 
  • Frame Mounts Can Be Bolted (C-Frame) Or Welded (Boxed Frame) 
  • Laser Cut & CNC-Bent Brackets Ensure Perfect Fit 
  • Completely Adjustable For Suspension Preloading Without Removing 
  • Grade 8 Hardware
  • Length: 72" (Fits Most Short Bed Models)
  • Massive 2" Diameter Heavy-Duty Steel Tube 
  • Radiused Rear Axle Tabs (Welding Required)


  • MFG. Number 200901-UNV-72
  • Manufacturer Name Longhorn Fab Shop
  • Shipping Weight 58.00 lb.
  • Shipping Length 69 in.
  • Shipping Width 5 in.
  • Shipping Height 5 in.
  • Fuel Type Diesel / Gas
  • Prop 65 Prop 65 WarningWARNING: Cancer & Reproductive Harm -
  • Internal L10.00R1.00


★★★★★ ★★★★★
4.3/5 Stars out of 3 Reviews
Verified Buyer
Longhorn Fab 200901-UNV-72 Traction Bars
2004 F-350 CCSB - 4in lift Would give 5 Stars but one of the right-hand thread heim joint jam nuts would not thread onto the heim joint. This was a Longhorn Fab Shop issue, not an XDP issue. The nut was tapped with a different thread pitch or something. The other 3 nuts worked just fine. They don’t provide a size/thread count for the jam nut on the parts list so running around to the local hardware stores to find a nut that might work was a cluster. Held up the project for over a week. Simple QC issue fixed at the factory by just threading the nuts onto the heim joint before throwing them in a box would be an easy enough fix The traction bars were good quality, paint was a little scuffed up, not an issue for me though, and installation was pretty straight forward. Opted for the weld-on tabs, went well. Definitely reduced axle wrap to practically zero on take-off. Got in contact with Longhorn Fab Shop, explained the issue. No fuss, they shipped out a new jam nut. Order #1831924
Verified Buyer
Order #1361579
The directions were very simple and instalation went easy, only reason it didnt get 5 stars is the powdercoat finish on the bars wasnt that good there were bubbles and chips in it. Also had to open up the axle tabs so the bolts would fit better, once on the truck it was a night and day difference definitely worth the money
Definitely worth it!
Easy to install and adjust, made my truck feel completely different lowered 0-60 more then a second and axel wrap gone! No more hopping. very happy with the purchase, I recommend for anyone wanting weldable track bars.

Write a Review

Include Your Order Number For a Chance to Win a $100 Gift card

Overall Rating

Your Information

Email Address will not be made public.

Questions and Answers

My truck has a 6 inch lift - Will these work?
View Staff Answer 
Yes, these will work without a problem on a truck with a 6" lift.
What is the difference between the hot street version and this?
View Staff Answer 
Hot Street Rod Ends are available exclusively from Longhorn Fab Shop. This rod end is for the budget conscience racer/sled puller that still wants an upgraded rod end compared to the standard end. This end is designed to have less noise, smoother operation, and provide more strength than the standard grade end.
Truck has about 13" of lift. Will these work or do I need a drop bracket for mounting to the frame...
View Staff Answer 

Regardless of the amount of lift the vehicle has you will want to select the proper length traction bar by your bed length. If you have a short bed truck you will want the 72” traction bars. If you have a long bed truck, you will want the 86” traction bars.

Am i able to directly fot and weld these to my 08 ford f250 crew cab short bed?
View Staff Answer 

The LONGHORN FAB 200901-UNV-72 TRACTION BARS are a Universal traction bar that fits most short bed trucks. The frame mount can be bolted to a c-frame or welded to a boxed frame. Moreover, the rear axle tabs must be welded to the rear axle tube.

Ask a question about this product

Please allow up to 1 business day for reply.

More to Consider

Recently Viewed