SELECT ENGINE

Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
USD 515.9
Part #: LH200952-UNV-HS

*Discontinued* Longhorn Fab 200952-UNV-HS Traction Bars Weld-It Kit (Hot Street)

Vehicle Fitment:
Universal - Many Applications (Fabrication Required)
Part #: LH200952-UNV-HS
Ships directly from the manufacturer

An Email Will Be Sent With Expected Shipping Date After Purchase

FREE Delivery by ,
If you order within hr min
This product cannot be shipped to your destination
Not Shipping to ?
Need it faster?
Our Recommendations Compatible Products
Close
Scroll to View More

Description

The Longhorn Fab 200952-UNV-HS Universal Traction Bars Weld-It Kit with Hot Street Upgraded Rod Ends gives you the hardware needed to build your own Traction Bars. Just supply the tube! Nearly every truck has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! 

Longhorn Fab Shop has listened to the demands and they have created a simple, cost effective solution to the problem. This weld-it kit is perfect for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation.+

This kit includes the upgraded Hot Street Rod Ends available exclusively from Longhorn Fab Shop. This rod end is for the budget conscience racer/sled puller that still wants an upgraded rod end compared to the standard end.  This end is designed to have less noise, smoother operation, and provide more strength than the standard grade end.  

Features:
  • Weld-It Kit - You Supply Tubing 
  • Hot-Street Upgraded Rod Ends 
  • Laser Cut & CNC-Bent Brackets For Perfect Fit
  • Takes Guesswork Out Of Building Traction Bars 
  • Turnbuckle Design Allows For Easy Adjustments 
  • Adjustable For Suspension Preloading Without Removing Bar
Kit Includes:
  • Universal axle tabs (Welding Required)
  • Front Frame Brackets
  • Grade 8 Hardware
  • Hot Street Rod Ends (Heim Joints)
  • Weld-In Threaded Bungs (Welding Required)
Specifications:
  • Rod Ends 1-1/8"-7 Thread (2 Left Hand, 2 Right Hand)
  • Weld-In Bung is 1.580" Diameter (Part That Slips Into Tube)
  • 2" Weld Bung (Overall Diameter)
What You Need (Not Included):
  • Welder  
  • 1.5" Sch 40 A36 Structural Pipe OR tube with ID larger than 1.590" and OD smaller than 2.250"+
  • Tube/Pipe should be 63.5" for short bed or 77.5" for long bed

Specifications

  • MPN 200952-UNV-HS
  • SKU LH200952-UNV-HS
  • ID 28001
  • Manufacturer Name Longhorn Fab Shop
  • Shipping Weight 29.00 lb.
  • Shipping Length 19 in.
  • Shipping Width 11 in.
  • Shipping Height 8 in.
  • Fuel Type Diesel / Gas
  • Prop 65 Prop 65 WarningWARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
  • Internal L0R0

Reviews

No Reviews Yet!

Write a Review

Include Your Order Number For a Chance to Win a $100 Gift card

Overall Rating

Your Information

Email Address will not be made public.

Questions and Answers

For a short bed would i need 63.5" total or would i need 2 63.5" tubes? Do i need 2 63.5" pieces or just 1 then it will be cut in half?
View Staff Answer 
Answer
It would require 2 pieces of 63.5" pipe.

Ask a question about this product

Please allow up to 1 business day for reply.

More to Consider

Recently Viewed

ITEM ADDED TO CART

Complete the job with these highly suggested add-on products.

Product prices marked with an * may require additonal fees, such as a core charge, which will be displayed in the cart.