MADS Smarty Programmer S-06

*Discontinued* See Smarty S-06 PoD
03-07 Dodge 5.9L Cummins
XDP Part Number:
free shipping
$5 Price Beat Guarantee

Fast guide to  Smarty’s special Features

  • CaTCHER software's inside
  • Ten different  performance levels.
  • Fastest download in the industry, up to three times faster than
    the competition, a typical ECM update takes about 3.5 to 5
    minutes, depending on the truck model.
  • ABS tire height updates in just few seconds.
  • Not traceable in the stock setting. Smarty leaves no footprint.
  • Manual High Idle is enabled in all softwares
  • Reads  Diagnostic Trouble Codes in plain text.
  • No tools required, no fuses to pull.
  • USB built in for simple updates .
  • Most complete keyboard in the industry.
  • Reliable, it works off your OEM hardware.
  • Programmable Speed Limiter from 25 to 250 mph

Fast guide to Smarty's software levels

The horsepower settings. except #0, all other softwares have a
modified "Torque management" ( TQM ). The throttle response
is greatly improved but is set to a save limit. With "Save" I mean
save for your tranny and rest of the driveline.

SW # 0 : Half power

SW # 1 : 30 Hp increase, with added timing .

SW # 2 : 60 Hp increase, no added timing.

SW # 3 : 60 Hp increase, with added timing.

SW # 4 : 90 Hp increase, no added timing.

SW # 5 : 90 Hp increase, with added timing.

SW # 6 : 130 Hp increase, no added timing.

SW # 7 : 130 Hp increase, with added timing.

SW # 8 : 170 Hp increase, no added timing.***

SW # 9 : 170 Hp increase, with added timing.***

Tested on stock trucks on a Mustang Dyno.
Stock means just that. Stock! Even the air filters were stock...

The trucks were S T O C K, even the wastegate settings!
We checked the "baseline" ( the stock truck Hp at the rear
wheels ) twice in a day in order to be sure about our findings.
The above declared HP numbers are all rounded down to the
closest number. For example the 90 Hp file actually did 96 Hp.
That's a 90 Hp software for me, not a 100. The 170 Hp was 174.

No trace is left in the ECM!
I herby CLAIM that SmartyCR is the FIRST AND ONLY
downloader that does not erase any of the stored data in the
ECM. Smarty does NOT leave any electronic footprints in the
ECM or any other electronic module in the truck. Smarty does
NOT set ANY codes once the ECM is set back to stock. Smarty
does NOT need to have fuses pulled.

No matter what the competition claims , in one way or another
they're ALL detectable.
Smarty is NOT!

Yet, Smarty can not do one thing for you. Fix what others have
broken. Smarty can not restore a key on counter that another
downloader has erased . Smarty can not fix VIN# troubles
caused by other products. If your Check engine / ABS light is on
because another product has screwed your ECM, Smarty can
not fix it, the other guy HAS to...

ABS / Speedo recalibration
The tire height can be adjusted up to 44" in increments of 10
tenth of an inch in just a couple seconds. Of course, Smarty
needs to be VIN# locked to the truck in order to get into the ABS
adjustment section.

DTC Code reader
The name says it all.
You can read and erase codes. Codes are displayed also in
plain English. That's old news by now. Smarty S-03 was the first
one to provide that utility, others found the idea to be a good
one too. 
( Smarty does erase ABS codes too but does not display them )

ECM update speed
Faster than anything else on the market! Again we've done our
homework on the protocol. Less than 5 minutes. Three times
faster than a Star-Scan diagnostic tool or competitor.

We have developed our own bootloader in order to not have to
pull fuses should an update become interrupted for any reason.
All you have to do is to turn the key off / key on Smarty does
everything else on it's own.

The CaTCHER softwares as they are today are only a starting
point. Expect major news in future. We’re for your feedback,
opinions, likes, dislikes...
We will make Smarty do what YOU want, TOGETHER.


Additional Information

Install Sheet
Mfg. Number:

Customer Reviews - Include your order number for a chance to win a $100 GiftCard

(48 Ratings, 7 Reviews) Average Rating:
the first to under rate there power
tt (eureka, ca) 6/29/2009 3:12 PM
i had a 75hp chip before that did nothing but get hot. i returned it for a smarty and set it on 30hp and it blew that old chip out of the water. i now run it all day on 130 and love it. if you dont mind having to upgrade your clutch and some good smoke clouds i would definetly choose smarty. plus you can download new software off their website for free. how can you beat that.
Jeremy Hungerford (Maryland) 5/28/2009 9:21 PM
This programer is the best have had on my truck. better than super chips, banks 6 gun wit pda and SL, and bully dog crazy larry. i have had all 3 on the truck. This programer is the best espeachaly with the REVO TNT update!!! OMFG! get ready to launch like a rocket
dexter (alabama) 5/4/2009 10:02 PM
05 dodge the 6in pours out the black smoke. power is really good but the 130 hp setting made my clucth slip at 24000 miles so i had to get a south bend clucth. but the power is great. best money i have spent on my truck.
Smarty S-06
J. Collier (South, Tx.) 3/19/2009 11:05 PM
This is by far the best programer that i have ever put in my cummins. I should have not wasted my money on the rest. Dodge Makes It, Cummins Shakes It, And Smarty Makes The Coal Roal. And the extra fuel mileage is great too.
amasing programmer
nate (ny) 2/9/2009 7:53 PM
i have 7 inch grand rock stacks smoke pours out if you got a cummins i would recomend this to anyone