Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
USD 94.99
Part #: ME10057

Merchant Automotive 10057 Transfer Case Pump Upgrade Kit with Fluid

2001-2007 GM 6.6L Duramax
Part #: ME10057
$94.99
Temporarily Out of stock - More on the way!

An Email Will Be Sent With Expected Shipping Date After Purchase

SHARE
Our Recommendations Compatible Products
Close
Scroll to View More

Description

The Merchant Automotive 10001 Transfer Case Pump Upgrade Kit with Fluid for your 01-07 GM 6.6L Duramax is the best upgrade you can make to your GM transfer case (model 136, 146, 246, 261, 261HD, 263HD, 263XHD, 261XHD) to prevent the ever increasing problem of pump rub. 

What is pump rub?
The GM transfer cases use a gear pump inside the case that is driven off the mainshaft. The pump forces oil to the planetary as well as the drive sprocket sleeve. Because the pump is driven by the shaft, the housing of the pump must 'float' in the rear housing. There are 5 tabs around the housing that fit into spots in the rear housing to position the pump. Over time, the pump can start to wear on the rear housing. GM installed a spring steel clip in the housing intended to prevent wear but the clip can break and render useless

Being that the pump housing is aluminum and is a harder material then the magnesium rear housing, it can wear a hole in the rear housing and cause a very small leak. This leak is high enough in the case that it typically will not leak when vehicle is not moving and therefore not leaving any drops on the ground. Typically the condition is not found until there is transfer case damage from running the case out of fluid.With installation of this kit, you will have a LIMITED LIFETIME WARRANTY against pump rub.


Included Components:
  • Merchant Automotive billet transfer case pump housing
  • Transfer case adapter gasket at trans
  • RTV Silicone
  • Blue Threadlock
  • Transfer Case Fluid
  • Merchant Automotive sticker
If you already have a hole in your case, its recommended to install a new rear housing for a proper repair.  Lifetime warranty will only apply to installations with a new rear housing.

Application Guide
Year
Model
Transfer Case Model Number
1998-2007
GM Silverado/Sierra - 1500, 1500HD, 2500, 2500HD, 3500
NP246, NP261HD, NP263HD, NP261XHD, NP263XHD
1998-2003
Blazer / Jimmy
NP236
1999-2005 
Astro/Safari
NP136
1999-2007
Escalade
NP246, NP149
2002-2007
Avalanche 1500/2500
NP246, NP261, NP263, NP263HD
1998-2007
Suburban/Yukon/Tahoe/Yukon XL 1500/2500
NP246


Frequently Asked Questions:

 
What do I do with the OEM anti rattle clip when installing this upgrade?
 You can discard the factory clip during installation of this kit.  Its been designed to work with the clip removed.
 
What other parts will I need to install this upgrade kit?
We tried to make the kit all inclusive for a basic installation. This is taking into consideration of course that its being installed as preventative measures. If its being installed as part of a repair or after pump rub has occurred, there is no real way to know the extent of the damage inside the case until it is torn down.  Most times, as long as the case has not run out of fluid, it can usually be repaired with a new rear housing and seal and prevented from ever happening again using the upgrade kit. Regardless of the reason for installing this upgrade, you will need to refill the transfer case with oil. We recommend our Performance Transfer Case Oil for use in ALL transfer cases.

Specifications

  • MFG. Number 10057
  • Manufacturer Name Merchant Automotive
  • Shipping Weight 5.00 lb.
  • Shipping Length 10 in.
  • Shipping Width 10 in.
  • Shipping Height 7 in.
  • Fuel Type Diesel
  • UPC 804314235413
  • Warranty Yes
  • Warranty Info Lifetime
  • Prop 65 WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

Reviews

No Reviews Yet!

Write a Review

Include Your Order Number For a Chance to Win a $100 Gift card

Overall Rating

Your Information

Email Address will not be made public.

Customer Photos

Customer Photos

See what others built Submit your photo

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)
No Questions asked yet!
XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:

  • UPDATE: Effective 6/1 Customer Service resumes normal business hours of M-F 8:30 – 9:00pm EST.
  • Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
  • Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
  • All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.