The Mile Marker Hydraulic Winch System has been a self-recovery icon for over 15 years. This legendary system utilizes the vehicle's OEM power steering pump as its power source. Everyday, more than 200 million power steering pumps operate flawlessly. Used in all types of vehicles, under every condition, from 50 below to 135 degrees above, the pump must perform for years without service or adjustment. It has to withstand every type of abuse without failure. Having a built-in governor (the pressure relief valve), it is impossible to overload or overwork the pump. This is why harnessing the hydraulic power steering pump has become the best choice for recovery power!
The Mile Marker HI Series Hydraulic Winch was intended for permanent mounting in the front or rear of a vehicle. The solenoid control valve is integrated into the winch body, and therefore always remains in the same location as the winch itself. These systems include all necessary hoses, solenoid control valve, remote control, roller fairlead with fasteners, and winch cable. To adapt to your vehicles power steering pump, the HI Series winches (HI9000, HI10500, and HI12000) require a vehicle specific 35-series vehicle adapter kit shown below.
Features:
2 Speed
Mechanical Lock
Freespooling
Integrated Solenoid Valve
Can Use Underwater
Corrosion Resistant
Stainless Steel Tie Bars and Fasteners
17.9 Cubic Inch Motor
Roller Fairlead
Specs:
Gear Train: Planetary
Gear Ratio: 6:1
Motor: 17.9 Cubic Inch
Control: Illuminated Joystick Remote
Cable: 3/8 x 100 (14,400 lbs)
Drum Size: 2.5 x 9
Bolt Pattern: 4 Bolt, 4.5 x 10
Power Steering Min. Req: 3.5 GPM & 1500 PSI