Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Exhaust Brakes

New Product Filters!
BD-Power 1028030 3" Remote Mount Exhaust Brake 34163 25.00 BD-Power 1028030 3" Remote Mount Exhaust Brake
$ 1205
The BD-Power 1028030 3" Remote Mount Exhaust Brake provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 3" Exhaust Systems For Trucks With On-Board Air24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included.Exhaust back pressure test gauge kit is recommended.Intended for use on trucks with on-board air. Air compressor not included. Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
BD-Power 1028035 3.5" Remote Mount Exhaust Brake 34164 25.00 BD-Power 1028035 3.5" Remote Mount Exhaust Brake
$ 1205
The BD-Power 1028035 3.5" Remote Mount Exhaust Brake provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 3.5" Exhaust Systems For Trucks With On-Board Air24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included.Exhaust back pressure test gauge kit is recommended.For use on trucks with existing on-board air. Air compressor not included.Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
BD-Power 1028040 4" Remote Mount Exhaust Brake 34167 25.00 BD-Power 1028040 4" Remote Mount Exhaust Brake
$ 1205
The BD-Power 1028040 4" Remote Mount Exhaust Brake provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 4" Exhaust Systems For Trucks With On-Board Air24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included. Exhaust back pressure test gauge kit is recommended.For use on trucks with on-board air. Air compressor is not included.Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
BD-Power 1028050 5" Remote Mount Exhaust Brake 34177 25.00 BD-Power 1028050 5" Remote Mount Exhaust Brake
$ 1205
The BD-Power 1028050 5" Remote Mount Exhaust Brake provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 5" Exhaust Systems For Trucks With On-Board Air24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included. 4" ID brake valve is used with 5" exhaust adapters.Exhaust back pressure test gauge kit is recommended.For use on trucks with on-board air. Air Compressor not included.Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
BD-Power 1028130 3" Remote Mount Exhaust Brake With Air Compressor 34168 30.00 BD-Power 1028130 3" Remote Mount Exhaust Brake With Air Compressor
$ 1340
The BD-Power 1028130 3" Remote Mount Exhaust Brake With Air Compressor provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 3" Exhaust Systems Includes Air Compressor 24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included. Exhaust back pressure test gauge kit is recommended.Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
BD-Power 1028135 3.5" Remote Mount Exhaust Brake With Air Compressor 34169 30.00 BD-Power 1028135 3.5" Remote Mount Exhaust Brake With Air Compressor
$ 1340
The BD-Power 1028135 3.5" Remote Mount Exhaust Brake With Air Compressor provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 3.5" Exhaust Systems Includes Air Compressor 24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included. Exhaust back pressure test gauge kit is recommended.Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
BD-Power 1028140 4" Remote Mount Exhaust Brake With Air Compressor 34170 30.00 BD-Power 1028140 4" Remote Mount Exhaust Brake With Air Compressor
$ 1340
The BD-Power 1028140 4" Remote Mount Exhaust Brake With Air Compressor provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 4" Exhaust Systems Includes Air Compressor 24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included. Exhaust back pressure test gauge kit is recommended.Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
BD-Power 1028150 5" Remote Mount Exhaust Brake With Air Compressor 34171 30.00 BD-Power 1028150 5" Remote Mount Exhaust Brake With Air Compressor
$ 1340
The BD-Power 1028150 5" Remote Mount Exhaust Brake With Air Compressor provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 5" Exhaust Systems Includes Air Compressor 24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included. 4" ID brake valve is used with 5" exhaust adapters.Exhaust back pressure test gauge kit is recommended.Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
TAKE 10% OFF SITEWIDE* WITH OUR MEMORIAL DAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: MEMORIAL10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 5/28/19 only.