Products Showing Parts for — {{ }}

No Results
Part #: PU24VSWCA

Pusher 24VSWCA Intake Manifold & Cross-Air

2003-2007 Dodge 5.9L Cummins
Part #: PU24VSWCA
  1 Review
Possible manufacturer drop-ship item
Call or use Live Chat to verify real-time inventory
Our Recommendations Compatible Products
Scroll to View More
  1 Review


The Pusher 24VSWCA Intake Manifold & Cross-Air for your 03-07 Dodge 5.9L Cummins taps into existing ports, one at the front and rear of the intake plenum. By splitting off the driver-side intercooler tube and creating two parallel paths of air flow in addition to the stock plumbing, cylinders 1, 5, and 6 can be better supplied with air. Built from all TIG welded, 3 mandrel bent tubing, with laser cut 1/2" flange and 1/4" dipstick mount. All intake manifolds come standard with two 1/8 inch NPT ports on the back for methanol/water injection, a boost gauge, etc. This is a complete kit that includes instructions, heavy duty 4-ply silicone couplers, stainless T-bolt clamps, a factory Cummins gasket, factory Cummins bolts, and port plugs for a quality install.

  • Constructed of mandrel bent tubing.
  • Fully TIG welded with precise settings to produce optimal penetration without impacting airflow.
  • Significant drop in EGT's due to better equalized airflow to cylinders 1, 5, and 6.
  • Fuel mileage increase
  • Increased throttle response
  • Faster turbo spool-up

Note: This kit is not compatible with the APPS mounted in the stock location on 2003-2005 trucks. You must relocate or purchase the Pusher APPS relocation bracket to use the Cross-Air on trucks equipped with a APPS.


  • MFG. Number24VSWCA
  • Manufacturer NamePusher
  • Weight15.00 lb.


Robert Reily
Location: casper wyoming
install was a breeze looks great and gained about 3mpg, boost dropped 16psi but that is what happens when flow is seriously increased and turbo is stock truck spools super fast and i can only smoke out 2 lanes of traffic instead of 4 truck is faster than before and new turbo is in the works. this product is worth the price and build quality is very professional if i had a 2nd truck i would defiantly buy this intake again.

Include Your Order Number For a Chance to Win a $100 Gift card

Customer Photos

Customer Photos

See what others built Submit your vehicle

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

Am i able to mount this on my 1994 12v engine? Do i need to change pistons and rods in order for this head to work? If i cannot use this head without changing pistons on my 1994 12v, do you guys make a 12v head that uses the same multi port intake to improve airflow to the rear cylinders?
View Staff Answer 

The PUSHER 24VSWCA INTAKE MANIFOLD & CROSS-AIR will ONLY work with the 2003-2007 Dodge 5.9L Cummins.

Emissions Notice

This product is not legal for sale or street use in California. Certain aftermarket products are subject to governmental emission standards regulated by the California Air Resources Board. In order for these products to be legal on a specific vehicle in California, the part number must receive a CARB Executive Order (EO) number. This number makes the part legal for use only on specific years, makes and models of vehicles. A decal with CARB EO number for these parts must be displayed in the engine bay to satisfy smog inspection requirements.