Products

No Results
Part #: PU67IMS

Pusher 67IMS 3.5" MEGA Intake Manifold

2007.5-2012 Dodge 6.7L Cummins
Part #: PU67IMS
$329.99
Possible manufacturer drop-ship item
Call or use Live Chat to verify real-time inventory
Finish
SHARE
Our Recommendations Compatible Products
Close
Scroll to View More

Description

The Pusher 67IMS 3.5" MEGA Intake Manifold for your 07.5-12 Dodge 6.7L Cummins is built around a 3.5" inlet that smoothly transitions to two 3" mandrel bent tubes. This design also enabled the use of a short bolt in place of the long driver-side flange bolt that passes right through the center of the stock manifold air plenum. Thus freeing up airflow even more yet maintaining the stock six bolt pattern for a proper seal. The twin tube design nearly doubles the outlet size of the stock manifold while minimizing the impact of the initial section of the number one injector line.

These design features amount to a 49.4% increase in flow over the factory manifold. With this vast improvement over the stock manifold you can expect quicker turbo spool, lower egt's, and less over all strain on your motor.
This manifold also includes instructions, a polished stainless dipstick mount, port plugs, a factory Cummins gasket and hardware to make installing this intake extremely easy.

Features:
  • Unobstructed 3.5" inlet to two 3" mandrel bent tubes.
  • Fully TIG welded with precise settings to produce optimal penetration without impacting airflow.
  • 50-200 degrees F drop in EGT's
  • .5-1 MPG increase
  • Deletes constrictive emissions equipment
  • Significant gain in throttle response
  • Faster turbo spool
Note: You will need to delete all of your factory emissions equipment as this manifold does not have provisions to use any of it. This manifold is for off road use only. This product will work with dual CP3's.

Specifications

  • MFG. Number67IMS
  • Manufacturer NamePusher
  • Weight10.00 lb.

Reviews

Be the first to rate this item!

Write Review

Customer Photos

Customer Photos

See what others built Submit your vehicle

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

Does this pusher intake elbow also delete the throttle valve? 2011 dodge pusher intake elbow
View Staff Answer 
Answer

Yes, the PUSHER 67IMS 3.5" MEGA INTAKE MANIFOLD will remove the factory throttle valve.

Emissions Notice

This product is not legal for sale or street use in California. Certain aftermarket products are subject to governmental emission standards regulated by the California Air Resources Board. In order for these products to be legal on a specific vehicle in California, the part number must receive a CARB Executive Order (EO) number. This number makes the part legal for use only on specific years, makes and models of vehicles. A decal with CARB EO number for these parts must be displayed in the engine bay to satisfy smog inspection requirements.