Products Showing Parts for — {{ active_vehicle.name }}

No Results
Part #: PU67KIT2GWHP

Pusher 67KIT2GWHP 3.5" MEGA Intake w/ Pass Side Intercooler Tube

2010-2012 Dodge 6.7L Cummins
Part #: PU67KIT2GWHP
$549.99
Step 01 / 04
Prev
Next
SHARE
Our Recommendations Compatible Products
Close
Scroll to View More

Description

The Pusher 67KIT2GWHP 3.5" MEGA Intake w/ Pass Side Intercooler Tube for your 10-12 Dodge 6.7L Cummins is built around a 3.5" inlet that smoothly transitions to two 3" mandrel bent tubes. This design also enabled the use of a short bolt in place of the long driver-side flange bolt that passes right through the center of the stock manifold air plenum. Thus freeing up airflow even more yet maintaining the stock six bolt pattern for a proper seal. The twin tube design nearly doubles the outlet size of the stock manifold while minimizing the impact of the initial section of the number one injector line. These design features amount to a 49.4% increase in flow over the factory manifold. With this vast improvement over the stock manifold you can expect quicker turbo spool, lower EGT's, and less over all strain on your motor. This manifold also includes instructions, a polished stainless dipstick mount, port plugs, a factory Cummins gasket and hardware to make installing this intake extremely easy. You will need to delete all of your factory emissions equipment as the manifold does not have provisions to use any of it. This manifold is for off road use only.

The Pusher intercooler tubes are built around 3.5" mandrel bent .060" thick tubing. These tubes help optimize your factory intake plumbing by replacing the stock 2.4" ID plastic driver side tube and 2.63" ID passenger-side tube. This kit also includes heavy duty 4-ply silicone couplers and stainless T-bolt clamps to make installing these tubes extremely easy. When using this kit, you do not have to try and cut the factory steel bands off the factory tubes in order to save the factory boots. Just loosen the factory clamps and install the supplied parts.

Features:
  • 50-200 degree Fahrenheit drop in EGT's
  • .5-1 MPG increase
  • Deletes constrictive emissions equipment
  • Significant gain in throttle response
  • Faster turbo spool

Note: You will need to delete all of your factory emissions equipment as the manifold does not have provisions to use any of it. This manifold is for off road use only.

Specifications

  • MFG. Number67KIT2GWHP
  • Manufacturer NamePusher
  • Shipping Weight15.00 lb.

Reviews

Be the first to rate this item!

Write Review

Customer Photos

Customer Photos

See what others built Submit your photo

Submit a photo for this product and get a $10 XDP Gift Card for approved images the entire month of February - Limit one per customer. Ends 2/28.

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

Does the pusher intake and boost tube with natural finish have any coating on it?
View Staff Answer 
Answer

The natural finish does not have a coating and is a great option if someone chooses to paint the tubes themselves.

TAKE 10% OFF WITH OUR PRESIDENT'S DAY SALE!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: PRES10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 2/19/18 only.

Emissions Notice

This product is not legal for sale or street use in California. Certain aftermarket products are subject to governmental emission standards regulated by the California Air Resources Board. In order for these products to be legal on a specific vehicle in California, the part number must receive a CARB Executive Order (EO) number. This number makes the part legal for use only on specific years, makes and models of vehicles. A decal with CARB EO number for these parts must be displayed in the engine bay to satisfy smog inspection requirements.