Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Auto Meter 5323 OBDII Splitter 34039 1.00 Auto Meter 5323 OBDII Splitter
5.00 5 2
$ 39.95
Use multiple OBDII devides with the Auto Meter 5323 OBDII Splitter. This low profile OBDII Signal Splitter / Pass Through allows for remote location of connections for OBDII products like the Auto Meter AirDrive, DashLink and Dash Control while providing an easy to access connection point for other onboard devices requiring access to the OBDII data stream. Features: OBDII Splitter Allows For Multiple OBDII Devices Compatible With Most 1996+ OBDII Vehicles
BD-Power 1030705 2Low Unloc 30091 1.00 BD-Power 1030705 2Low Unloc
$ 148
The BD-Power 1030705 2Low Unloc provides your 2009-2018 Dodge Ram with the option of low range in 2WD! The 2Low Unloc is designed to allow the operator to manually disable the front wheel drive mechanism by holding the hubs in the free (2WD) mode with the transfer case in 4WD low range. By allowing the front wheels to be disengaged, maximum torque is available to the rear wheels. This will also allow for sharp All The Way Over turns without the front axle u - joint hopping or binding. With this kit installed, the front wheels will NOT be driven through the transfer case. This allows the operator to have full power and torque while in a high gear reduction applied to the rear axle only. Features: Enables Low Range 2WD Applies Maximum Torque To Rear Axle Only Applications: 2009-2018 Ram 1500 4WD 2014-2018 Ram 2500 4WD 2013-2018 Ram 3500 4WD
BD-Power 1036622 High-Idle Kit 23133 2.00 BD-Power 1036622 High-Idle Kit
$ 255
The BD-Power 1036622 High-Idle Kit for your 2007-2019 5.9L/6.7L Cummins and 2014-2019 Ram 1500 3.0L EcoDiesel works great with remote starters, PTO's and extended idling applications. Warm up your engine faster on cold mornings with BD Diesel's High Idle Kit. Quick and easy install, the High Idle switch mounts on the dashboard and plugs in under the dash. The rotating switch allows for adjustable high idle speeds - 900 / 1200 / 1500 / 1800 / 2100 RPM. Features: Quick and Easy Installation In-Cab Adjustable Switch Adjustable High Idle Speeds Applications: 2007.5-2019 Dodge 5.9L/6.7L Cummins 2014-2019 Ram 1500 3.0L EcoDiesel
BD-Power 1036752 E-PAS Emergency Engine Shutdown 27662 1.00 BD-Power 1036752 E-PAS Emergency Engine Shutdown
$ 775
The BD-Power 1036752 E-PAS Emergency Engine Shutdown for your 2014-2020 Ram 1500 3.0L EcoDiesel and Jeep Grand Cherokee is the perfect solution for when you need an emergency engine shutdown system. Some industries such as mining, oil refinery, forestry, mobile welding, septic removal and refueling require some vehicles to have an emergency engine shutdown in place. The most effective method for this is to cut the air supply to the engine ensuring fuel ignition to cease. BD-Power achieves this with the E-PAS without having to add additional bulky components or modifications to your engine or intake system. The E-PAS is an electronic controller that simply re-purposes the factory butterfly valve in your EGR System. It installs easily with factory style plug-in connectors and will not interfere with normal operation, or throw any codes or check engine lights. Most importantly, it can be easily uninstalled for those that lease their truck. Features: Easy Installation Uses Factory EGR Butterfly Automatically Resets After Shutdown Prevents "Runaway" Scenarios By Cutting Air Supply To Engine Note: This product requires your factory EGR and emissions equipment to function properly. This product is not intended to be used on trucks which have been modified for off-road tuning.
BD-Power 1057705 Throttle Sensitivity Switch 27504 1.00 BD-Power 1057705 Throttle Sensitivity Switch
5.00 5 2
$ 65
The BD-Power 1057705 Throttle Sensitivity Switch adds an external, on-the-fly control to the BD-Power Throttle Sensitivity Booster. This switch allows you to change settings quickly and easily without having to open the module and make adjustments. It also provides you with more level options. The normal module has two sensitivity levels. This add-on gives the driver multiple levels of sensitivity and in addition has both a valet mode and a ludicrous speed setting. The valet mode is perfect for modified vehicles as it allows the owner of the vehicle to reduce available power when allowing others to drive their vehicle. The ability to adjust the sensitivity level on the go is also helpful for driving in inclement road conditions where a lower responsiveness may be desired. Features: Adds On-The-Fly Adjustability Provides Multiple Levels Of Sensitivity Power Levels: Stock Low +50% Medium +75% High +100% Ludicrous +400% Valet Note: This switch will ONLY work on the 1057731, 1057732, 1057736, and 1057737 Throttle Sensitivity Booster. It WILL NOT work on the original, first generation Throttle Sensitivity Boosters (part number beginning in 105771).
BD-Power 1057932 Throttle Sensitivity Booster 80784 0.50 BD-Power 1057932 Throttle Sensitivity Booster
$ 265
The BD-Power 1057932 Throttle Sensitivity Booster will remove the laggy pedal feel from your 3.0L/6.7L Powerstroke, 5.9L/6.7L Cummins, or EcoDiesel Powered vehicle. This throttle sensitivity booster provides quicker engine response by amplifying the signal between the pedal and ECM to shorten the reaction time. Amplifying the signal forces the engine in your vehicle to react quicker and reach the performance portion of the RPM band sooner. The throttle sensitivity booster comes with factory connections for plug and play installation and does not interfere with emissions equipment. With 7 different modes to choose from, this throttle booster doesn’t require any programming and will learn the appropriate settings based on your driving style. Features: Reduces Pedal Lag Plug and Play Installation Does Not Affect Emission Equipment Quicker Engine Response and Acceleration Compatible With Diesel, Gas and Electric Applications (See Below)7 Different Modes: Valet, Security, Eco, Street, Sport, Race and Ludicrous 1 Year / 12,000 Mile WarrantyAlso Fits:2013-2019 Buick Encore 1.4L2017-2019 Buick Lacrosse 2.5L and 3.6L2018-2019 Buick Regal Sportback and TourX 2.0L and 3.6L2007-2010 Chrysler 300 2.7L / 3.5L / 6.1L2007-2020 Chrysler 300 5.7L2011-2020 Chrysler 300 3.6L2012-2016 Chrysler 300 6.4L2007-2009 Chrysler Aspen 5.7L2007-2008 Chrysler Pacifica 3.8L and 4.0L2008-2010 Chrysler Town and Country 3.3L / 3.8L / 4.0L2011-2014 Chrysler Town and Country 3.6L 2020 Dodge Caravan 3.6L 2010 Dodge Challenger 3.5L and 6.1L2010-2020 Dodge Challenger 5.7L2011-2020 Dodge Challenger 3.6L and 6.4L2015-2020 Dodge Challenger 6.2L2007-2010 Dodge Charger 2.7L / 3.5L / 6.1L2007-2020 Dodge Charger 5.7L2011-2020 Dodge Charger 3.6L2015-2020 Dodge Charger 6.2L2016-2020 Dodge Charger 6.4L2007-2011 Dodge Dakota 3.7L and 4.7L2007-2009 Dodge Durango 3.7L and 4.7L2007-2020 Dodge Durango 5.7L2011-2020 Dodge Durango 3.6L2018-2020 Dodge Durango 6.4L2008-2010 Dodge Grand Caravan 3.3L / 3.8L / 4.0L2011-2019 Dodge Grand Caravan 3.6L2007-2008 Dodge Magnum 2.7L / 3.5L / 5.7L / 6.1L2007-2011 Dodge Nitro 3.7L and 4.0L2007-2011 Dodge Ram 1500 3.7L2007-2013 Dodge Ram 1500 4.7L2007-2019 Dodge Ram 1500 5.7L2013-2019 Dodge Ram 1500 3.6L2014-2019 Dodge Ram 1500 3.0L Diesel 2007 Dodge Ram 2500/3500 5.9L2007-2018 Dodge Ram 2500 5.7L2014-2020 Dodge Ram 2500 6.4L2007.5-2020 Dodge Ram 2500 6.7L2007-2010 Dodge Ram 3500 5.7L2013-2018 Dodge Ram 3500 5.7L2014-2020 Dodge Ram 3500 6.4L2007.5-2020 Dodge Ram 3500 6.7L2011-2015 Dodge Ram 4500/5500 5.7L 2020 Dodge Ram 4500/5500 6.4L2011-2020 Dodge Ram 4500/5500 6.7L2008-2017 Dodge Viper 8.3L2008-2014 Ford E-150/250 4.6L and 5.4L2008-2012 Ford E-350/450 4.6L2008-2016 Ford E-350/450 5.4L2017-2019 Ford E-350/450 6.2L2013-2019 Ford E-350/450 6.8L2019-2020 Ford EcoSport 1.0L and 2.0L2012-2020 Ford Edge 2.0L2015-2020 Ford Edge 2.7L2011-2018 Ford Edge 3.5L2011-2014 Ford Edge 3.7L2017-2020 Ford Escape 1.5L2013-2016 Ford Escape 1.6L2013-2020 Ford Escape 2.0L2009-2020 Ford Escape 2.5L2009-2012 Ford Escape 3.0L2009-2014 Ford Expedition 5.4L2015-2020 Ford Expedition 3.5L2011-2019 Ford Explorer 3.5L2012-2015 Ford Explorer 2.0L 2013 Ford Explorer 3.7L2016-2020 Ford Explorer 2.3L 2020 Ford Explorer 3.0L and 3.3L2009-2010 Ford F-150 4.2L / 4.6L / 5.4L2010-2014 Ford F-150 6.2L 2011-2014 Ford F-150 3.7L2011-2020 Ford F-150 3.5L and 5.0L2015-2020 Ford F-150 2.7L2018-2020 Ford F-150 3.0L and 3.3L2011-2020 Ford F-250/350 6.2L and 6.7L 2020 Ford F-250/350 7.3L2011-2020 Ford F-450/550 6.7L2011-2019 Ford F-450/F53/550/F59 6.8L 2020 Ford F-450/550 6.2L and 7.3L 2020 Ford F53/59 7.3L2016-2019 Ford F-650/750 6.7L and 6.8L2013-2019 Ford Flex 3.5L2015-2018 Ford Focus 1.0L2008-2018 Ford Focus 2.0L2016-2018 Ford Focus 2.3L2012-2018 Ford Focus Electric2013-2015 Ford Fusion 1.6L 2013-2020 Ford Fusion 2.0L and 2.5L 2014-2020 Ford Fusion 1.5L2017-2019 Ford Fusion 2.7L2011-2017 Ford Mustang 3.7L2011-2020 Ford Mustang 5.0L2011-2012 Ford Mustang 5.4L2013-2014 Ford Mustang 5.5L2015-2020 Ford Mustang 2.3L and 5.2L2013-2017 Ford Taurus 2.0L2013-2019 Ford Taurus 3.5L 2013 Ford Taurus 3.7L2014-2016 Ford Transit Connect 1.6L2014-2020 Ford Transit Connect 2.0L2019-2020 Ford Transit Connect 1.5L and 2.0L 2020 Ford Transit Connect 1.0L2015-2018 Ford Transit 150/250/350/350HD 3.2L and 3.7L 2015-2020 Ford Transit 150/250/350/350HD 3.5L 2020 Ford Transit 150/250/350/350HD 2.0L2008-2009 Jeep Commander 4.7L2008-2010 Jeep Commander 3.7L and 5.7L2007-2009 Jeep Grand Cherokee 4.7L2007-2010 Jeep Grand Cherokee 3.7L2007-2010 Jeep Grand Cherokee 6.1L2007-2020 Jeep Grand Cherokee 3.0L and 5.7L2011-2020 Jeep Grand Cherokee 3.6L 2012-2020 Jeep Grand Cherokee 6.4L2019-2020 Jeep Grand Cherokee 6.2L 2007-2012 Jeep Liberty 3.7L2007-2011 Jeep Wrangler 3.8L2012-2018 Jeep Wrangler 3.6L 2020 Lincoln Aviator 3.0L2017-2020 Lincoln Continental 2.7L / 3.0L / 3.7L 2020 Lincoln Corsair 2.0L and 2.3L2015-2019 Lincoln MKC 2.0L and 2.3L2011-2016 Lincoln MKS 3.5L2013-2016 Lincoln MKS 3.7L2010-2019 Lincoln MKT 3.5L2013-2017 Lincoln MKT 2.0L2013-2019 Lincoln MKT 3.7L2011-2018 Lincoln MKX 3.7L2016-2018 Lincoln MKX 2.5L2011-2012 Lincoln MKZ 2.5L2013-2016 Lincoln MKZ 3.7L2013-2020 Lincoln MKZ 2.0L2017-2020 Lincoln MKZ 3.0L2019-2020 Lincoln Nautilus 2.0L and 2.7L2009-2014 Lincoln Navigator 5.4L2015-2020 Lincoln Navigator 3.5L
Edge Products 38852-D Amp'd Throttle Booster 34383 2.00 Edge Products 38852-D Amp'd Throttle Booster
$ 301.95
Reduce the laggy pedal feel in your 2007-2019 Dodge 5.9L and 6.7L Cummins or 2014-2018 Dodge Ram 1500 3.0L EcoDiesel with the Edge Products 38852-D Amp'd Throttle Booster. The Edge Products Amp'd Throttle Booster gives you a night and day difference in your driving experience. Designed for an easy installation, the Throttle Booster is an easy way to get a "seat of the pants" power increase that you won't find anywhere else. Decreasing pedal lag expedites your vehicle's performance curve to occur sooner and supplies quicker turbocharging spooling. Amp’d features an intuitive plug-and-play installation using your vehicle's stock connections. What makes Amp’d even more fun? Settings are adjustable to boost throttle position signals by 50% or 100%. Add in the optional Amp'd switch today and take throttle sensitivity to the next level with an additional 4 settings! Features:Quicker Spool-Up Improved Throttle Sensitivity Reduces Laggy Pedal Feeling Optimized Driving For In-Town and Highway
Edge Products 38862-D Amp'd Throttle Booster with Switch 34390 2.00 Edge Products 38862-D Amp'd Throttle Booster with Switch
5.00 5 1
$ 364.95
Reduce the laggy pedal feel in your 2007-2019 Dodge 5.9L and 6.7L Cummins or 2014-2018 Dodge Ram 1500 3.0L EcoDiesel with the Edge Products 38862-D Amp'd Throttle Booster. The Edge Products Amp'd Throttle Booster gives you a night and day difference in your driving experience. Designed for an easy installation, the Throttle Booster is an easy way to get a "seat of the pants" power increase that you won't find anywhere else. Decreasing pedal lag expedites your vehicle's performance curve to occur sooner and supplies quicker turbocharging spooling. Amp’d features an intuitive plug-and-play installation using your vehicle's stock connections. What makes Amp’d even more fun? With the included Amp'd Throttle Booster switch, you get 6 total power levels! This gives you a complete user-controlled experience for any type of driving preference. Features:Quicker Spool-Up Push button control Improved Throttle Sensitivity Reduces Laggy Pedal Feeling Stock, Low-50%, Medium-75%, High-100%, Valet, and 400% "Wow Mode"
Edge Products 98202 Back-Up Camera 1245 6.00 Edge Products 98202 Back-Up Camera
5.00 5 2
$ 190.95
The Edge Products 98202 Back-Up Camera is designed to work with the Edge Products CTS and CTS2 Monitors (not included) that have a built-in video port allowing you to connect Edge's state-of-the-art back-up camera. The CTS/CTS2's high resolution, color screen allows users to see what's going on behind them with the Edge camera connected to their existing CTS/CTS2. The camera mode automatically engages when the vehicle goes into reverse*. The back-up camera option is a must have for towers and safety-conscious drivers. Features: Elegant Design Durable Black Metal Finish Adjustable Camera Angle Parking Guide Lines Night Vision LED's Waterproof (IP67) Quick and Easy Installation Reverse/Non-Reverse Image Switch (option) Fits CTS and CTS2 Monitors (sold separately) *Camera automatically engages on most supported vehicles with automatic transmission, it will not automatically engage on manual transmission models
Edge Products 98609 EAS Power Switch w/ Starter Kit 19872 2.00 Edge Products 98609 EAS Power Switch w/ Starter Kit
$ 123.95
The Edge Products 98609 EAS Power Switch is an excellent upgrade for anyone that has or is planning to get an Edge Products CTS. This power switch wiring harness gives you the ability to install accessories such as lights or an air compressor and engage them from the CTS. Due to the easily customizable software you can name your accessory right on the screen and power your accesory right from your CTS Monitor. Features: Easy To Install and Operate Control Accessories From CTS Includes EAS Power Switch w/ Starter Kit
Edge Products 98615 EAS 12V Power Supply Starter Kit 28096 1.00 Edge Products 98615 EAS 12V Power Supply Starter Kit
$ 42.81
The Edge Products 98615 EAS 12V Power Supply Starter Kit allows the Insight CS2 and CTS2 to work on vehicles that don't have an OBDII port! By connecting to a key-switch power and ground source, an Insight becomes a digital gauge display for anything that you want to monitor! With the separate purchase of the EAS system, you can monitor EGTs, pressure readings, temperature readings, and much more. Features: 12V Harness For Non-OBDII Applications Works With Edge Products Insight CS2 and CTS2
Edge Products 98616 EAS Control Kit 28097 1.00 Edge Products 98616 EAS Control Kit
$ 222.95
The Edge Products 98616 EAS Control Kit allows you to monitor EGT's and adds the power switch to control multiple accessories with an on/off digital power switch. The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS Power Switch is a tremendous new feature for truck owners! Customers can now hook up accessories like aftermarket lights, air compressors, etc. and engage them from the CTS/CTS2 device. Install the new switch and either use Edge's MyStyle software to name your accessory or with the CTS2 rename those accessories right from your device. The CTS2 comes with an all-new screen layout that can monitor up to 6 gauges and 4 rocker switches for the ultimate control. Take advantage of Edge's clean EAS daisy chain link system to turn your truck's tools on/off. Features: For CTS and CTS2 Add Power Switch Monitor EGT's Kit Includes: EAS Starter Kit EAS EGT Probe EAS Power Switch
Edge Products 98617 EAS Competition Kit 28098 2.00 Edge Products 98617 EAS Competition Kit
$ 387.95
The Edge Products 98617 EAS Competition Kit is the perfect option for those enthusiasts that want to maximize the use of their Edge Insight. The EAS Compeition Kit gives you the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners who have upgraded turbo or turbo's and other mods ,where the stock sensors just aren't enough anymore. This kit is ideal for trucks participating in dyno competitions, sled pulls, and drag racing. The EAS EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS 0-100 PSIg Boost Sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. Simply install this sensor, use MyStyle to set up the sensor, and have the ability to see what kind of boost you can build. Or maybe you are trying to fine tune your truck and need to install a drive pressure sensor or fuel pressure sensor the Edge 0-100 PSIg sensor is your answer. The EAS Temperature Sensor is a -40F to 300F 1/8 NPT sensor that will allow you to monitor things like Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Another great solution for those with aftermarket accessories. Additionally, Edge Products has updated their Data Logging Software to now export all data logs into a CSV (Excel) file to save and compare runs, view, graph and improve tuning. To view CSV data log files, you must use MyStyle software or export it from MyStyle software. These new releases make the Insight CS2 and CTS2 the industry leader in digital gauge/data logging for any enthusiast! Features: Fits Edge CS/CS2 and CTS/CTS2 Includes Multiple Sensors For Monitoring Vitals Kit Includes: EAS Starter Kit EAS EGT Probe EAS Universal 5 Volt EAS 0-100 PSig Pressure Sensor EAS -40F To 300F Temperature Sensor
Edge Products 98618 EAS Data Logging Kit 28099 3.00 Edge Products 98618 EAS Data Logging Kit
$ 719.95
The Edge Products 98618 EAS Data Logging Kit is the ultimate component kit for maximizing the use of your Edge Insight. This kits gives users the ability to monitor EGTs in two different locations, two 0-100 PSIg boost sensors, and two -40F to 300F temp sensors for unmatched monitoring. This kit is designed for truck owners who have upgraded turbo or turbo's, and other mods where the stock sensors just aren't enough anymore. Truck owners who use trucks for dyno competitions, sled pulls, and drag racing need this kit. Fine tuning these trucks can be difficult, but with the Edge Data Logging Kit you can log runs, view logs, and make adjustments as needed for maximum performance. The EAS EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS 0-100 PSIg Boost Sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. Simply install this sensor, use MyStyle to set up the sensor, and have the ability to see what kind of boost you can build. Or maybe you are trying to fine tune your truck and need to install a drive pressure sensor or fuel pressure sensor the Edge 0-100 PSIg sensor is your answer. The EAS Temperature Sensor is a -40F to 300F 1/8 NPT sensor that will allow you to monitor things like Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Another great solution for those with aftermarket accessories. Additionally, Edge Products has updated our Data Logging Software to now export all data logs into a CSV (Excel) file to save and compare runs, view, graph and improve tuning. To view CSV data log files, you must use MyStyle software or export it from MyStyle software. These new releases make the Insight CS2 and CTS2 the industry leader in digital gauge/data logging for any enthusiast! Features: For Edge CS2 and CTS2 Multiple Sensors For Data Logging Kit Includes: EAS Starter Kit (2) EAS EGT Probes (2) EAS Universal 5 Volt (2) EAS 0-100 Psig Pressure Sensor (2) EAS -40 To 300F Temperature Sensor
Edge Products 98620 EAS Expandable EGT Probe With Lead 31307 1.00 Edge Products 98620 EAS Expandable EGT Probe With Lead
5.00 5 4
$ 130.95
The Edge Products 98620 EAS Expandable EGT Probe With Lead allows you to monitor exhaust gas temperatures with your Edge Product CS, CTS, CS2 and CTS2. The Expandable designed allows you to add optional expandable accessories from Edge Products such as pressure and temp sensors. This re-designed version of the original EAS Starter Kit EGT Probe, is built with a 15" lead so that the EGT Probe can be easily replaced, or removed without needing to replace the cable or other electronics. Features: Measures Exhaust Gas Temperatures Fits CS, CTS, CS2 and CTS2 Monitors Expandable Design - Works With Edge Product EAS System
Edge Products 98920 EAS Replacement EGT Lead 31309 1.00 Edge Products 98920 EAS Replacement EGT Lead
$ 32.41
The Edge Products 98920 EAS Replacement EGT Lead is a replacement for the original lead that comes with the Edge Products 98620. Features: 15" Lead Replacement For 98620
Edge Products EAS 98106 OBDII Pass Through Splitter 80014 1.00 Edge Products EAS 98106 OBDII Pass Through Splitter
$ 39.95
The Edge Products EAS OBDII Pass-Through Splitter is a great new way to add more functionality to the OBD-II port on your vehicle. This pass-through splitter is fully pinned with all 16-pins found in a standard OBD-II port, and allows you to plug in two separate products such as an Edge CTS2 unit, and another product like power running boards or custom tuning devices. Features: OBD-II SplitterOne Male Plug And Two Female PlugsCompatible On Most OBD-II Vehicles 1996+1 Ft. Lead Cables From OBD-II Port to Female Plugs
GDP Tuning GDP11014 OBD II Splitter 80235 1.00 GDP Tuning GDP11014 OBD II Splitter
$ 15.99
Get more information and functionality out of the OBD-II port on your vehicle with the GDP Tuning GDP11014 OBD II Splitter. This splitter allows you to plug in 2 different items into the OBD II port such as a GDP EZ Lynk Monitor and an EFILive Autocal. Features: OBD II SplitterOne Male Plug And Two Female PlugsCompatible On Most OBD-II Vehicles 1996+
GDP Tuning GDP633003 Plug-N-Play Throttle Booster 60211 2.00 GDP Tuning GDP633003 Plug-N-Play Throttle Booster
$ 299.99
Rid your 2007-2018 Dodge, Chrysler and Jeep Vehicle from that laggy pedal feeling when you purchase the GDP Tuning GDP633003 Plug-N-Play Throttle Booster. The Throttle Booster features a plug-n-play installation that plugs directly into your accelerator pedal sensor. Features:Reduces Pedal LagIncreased Throttle ResponseSimple Plug-N-Play Installation
Hypertech 752501 Speedometer Calibrator 31969 1.00 Hypertech 752501 Speedometer Calibrator
$ 229
The Hypertech 752501 Speedometer Calibrator for your 2014-2016 Ram 1500 3.0L EcoDiesel can correct the speedometer and odometer to account for non-stock tires and/or non-stock rear gear ratios. The Calibrator is engineered for consumers that want the speedometer recalibration functions of the Max Energy Programmer without the additional expense of the other tuning features. The Speedometer Calibrator comes with a USB cable and a CD containing software to enable quick updates and upgrades over the internet. For an additional charge, the Speedometer Calibrator can be upgraded to a Max Energy Power Programmer via the internet to include all the Max Energy features available for that vehicle. Simply plug Hypertech's Speedometer Calibrator into the vehicles under-dash connector, select the new tire height and/or new rear gear ratio, and in a matter of minutes, the vehicles computer is reprogrammed for accurate readings (as required by law).Features:Internet Updateable Return Back To StockRead and Clear DTC'sAdditional Options:Speedometer\Odometer Correction For Gears 2.82, 3.07, 3.21, 3.42, 3.55, 3.73, 3.92, 4.10, 4.56, 4.88 and 5.13Speedometer\Odometer Correction For Tire Sizes 22.5 - 44 inches 1/4 inch incrementsReturn Back To Factory Settings - Return Back To Stock
XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:

  • UPDATE: Effective 6/1 Customer Service resumes normal business hours of M-F 8:30 – 9:00pm EST.
  • Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
  • Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
  • All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.