The ReadyLift 49-1640-K 6" Off-Road Series Lift Kit with Bilstein Shocks for your 2014-2018 Ram 2500 provides a true 6" of front lift in your truck. Made in the U.S.A, this Off-Road Suspension System utilizes performance front coil springs and in the rear, ReadyLift used their proven spacer technology to design heavy duty rear spacers which team up perfectly with the factory rear coil springs. This system includes a lift structure that will enhance and improve the overall factory ride while greatly improving off road performance.
Along with performance springs and spacers, ReadyLift also developed rugged frame-mount radius arm drop brackets that re-position the factory radius arms back to the factory position. This is important so that the OEM alignment geometry can be retained. Also included are heavy-duty fabricated steel front and rear track bar brackets, dropped cast iron front pitman arm and front sway bar relocation brackets. ReadyLift even included front/rear bump stop extensions to prevent over-compression during off road use. The included Bilstein 5125 Series Shock Absorbers feature a superior single tube high gas pressure design for the utmost in consistent fade-free performance and long life.
This 6" suspension system is designed specifically for the 2014-2018 Dodge Ram 2500 4WD trucks with diesel engines and will allow for increased tire packages up to 37x13.50 and 9.5" wide wheel sizes from 17-20" diameters with 5" backspacing. 37x12.50 on wheel with less than 5" backspacing.
- 6" Lift
- Made In The U.S.A
- Includes All Necessary Hardware
- Includes (4) Bilstein 5125 Series Shocks
- Available In Black Or Silver Powdercoated Finish
- Coil Springs
- Radius Arm Drop Brackets
- Track Bar Drop Bracket
- Drop Pitman Arm
- Swaybar Drop Bracket
- Urethane Bump-Stop Extension
- Lift Spacers
- Track Bar Drop Bracket
- Steel Bump-Stop Extension
Tire Fitment (37" Max Diameter):
- 37x13.50 for no rub on a 9.5" wide wheel with 0 offset
- 18" - 37X13.5R18
- 20" - 37X13.5R20
- 22" - 325/60R22
Fitment Note: This kit is designed for diesel engine short bed trucks. Installing this kit on a long bed truck will amplify the factory drive shaft vibration. Installing this kit on a gas engine model truck will result in the front end sitting approximately 2" higher in the front than the rear.
Truck Freight Item: Allow 1-2 Weeks for delivery. Shipping fees apply.
|YEAR ||MAKE ||ENGINE |
|2014 ||Ram ||6.7L 24V Cummins |
|2015 ||Ram ||6.7L 24V Cummins |
|2016 ||Ram ||6.7L 24V Cummins |
|2017 ||Ram ||6.7L 24V Cummins |
|2018 ||Ram ||6.7L 24V Cummins |