Products Showing Parts for — {{ }}

No Results Showing Parts for — {{ }}
USD 96.57

TransGo SK TFOD-DIESEL Shift Kit

1996-2002 Dodge 5.9L Cummins 46RE/47RE
★★★★★ ★★★★★ 3 Reviews
Buy now, pay later using Affirm Logo during checkout.
Our Recommendations Compatible Products
Scroll to View More


Enhance the performance of the 46RE and 47RE TorqueFlite in your 1996-2002 Dodge Ram 2500/3500 Pickup with the TransGo TFOD-Diesel SHIFT KIT. This Shift Kit allows you to modify your transmission to fix the common complaints such as TCC slip or shudder, 2nd gear band and direct clutch failure, and torque converter drain-back.

This kit gives you the internal components so your transmission can operate at higher pressures. As a result, the max line pressure in 1st,2nd,3rd, can be set to 125 PSI, and up to 150PSI in lock-up or 4th gear. These line pressure increases provide you with a significant increase in torque capacity for all of the friction elements including the TCC clutch.

Elevated line pressures are ideal for performance built and heavy-duty work trucks. Once installed the shift timing remains at the OE RPM, but are shorter and crisp wit no harshness or banging. Each kit also includes a TransGo manual valve to reduce torque converter drain back to eliminate overnight forward and reverse delay. This kit can be installed with the transmission in the truck.

TCC slip or shudder
Reduces converter drain-back
2nd band failure
3rd clutch failure
Increases TCC and clutch element torque capacity
Improves TCC engagement feel
Provides short clean shifts

  • (3) High-temp low shrink sealing rings
  • Lower 1-2 accumulator spring
  • Case orifice plug
  • Front servo return spring
  • Throttle valve spring (for optional later up-shifts)
  • Part throttle body transfer plate, pin and two detent limit valve springs
  • Mumbly peg (for easy detent spring and ball installation)
  • USA-made hardened steel manual valve with converter charge in park provision
  • (3) 3-4 accumulator springs and plug for accumulator housing
  • Transfer plate, tapered plug, spring, checkball and limit bushing
  • (2) 3-4 quick fill valve springs
  • Main valve body separator plate
  • Solenoid body plate
  • Boost valve bracket and optional tuning plate
  • PR valve shim, spring seat and inner spring for line-to-converter feed provision as well as outer spring for increased pressure
  • (2) Drill bits

Note: Does not fit 48RE or the 2003 Dodge trucks with the 8th VIN code of 'C'.

Vehicle Applications

1996 Dodge 5.9L 12V Cummins
1997 Dodge 5.9L 12V Cummins
1998 Dodge 5.9L 12V Cummins
1998.5 Dodge 5.9L 24V Cummins
1999 Dodge 5.9L 24V Cummins
2000 Dodge 5.9L 24V Cummins
2001 Dodge 5.9L 24V Cummins
2002 Dodge 5.9L 24V Cummins


  • Manufacturer Name TransGo
  • Shipping Weight 1.65 lb.
  • Shipping Length 2 in.
  • Shipping Width 9.5 in.
  • Shipping Height 10.25 in.
  • Fuel Type Diesel
  • Prop 65 Prop 65 WarningWARNING: Cancer & Reproductive Harm -
  • Internal L0.00R10.00


★★★★★ ★★★★★
5.0/5 Stars out of 3 Reviews
Verified Buyer
Trans go shift kit
Very nice kit the parts felt well made and everything fit where it should. Really made the truck wake up in terms of the transmission. Would recommend to anyone with a 47. Order number - 3D1216751
Verified Buyer
Product is what was expected order # 1144830
quick delivery, and product was what to expect
Trans-Go Shift kit
I have this kit in my truck did not buy it at xtreme diesel but it works well with every day towing and driving takes sloppyness out of shifting Works well with a few upgrades but if you sled pull or drag race extremly you need to do more also this is not cure all for tranny problems either your tranny needs to be in fairly good shape my torque converter was slipping but other than that my tranny was in good shape so when I replaced converter we put the kit in with a 3 disk billet converter and billet input shaft also you might want to add the DTT pan off kit stage 1 i have had some problems with the bands staying adjusted so the next time I do service on tranny I will purchase the stage 1 kit and install it

Write a Review

Include Your Order Number For a Chance to Win a $100 Gift card

Overall Rating

Your Information

Email Address will not be made public.

Questions and Answers

How would this kit work with a stock trans? Would it be worth installing?
View Staff Answer 

Great! The Transgo SK-47RE Shift Kit is specifically designed for a stock transmission. The Transgo SK-47RE Shift Kit for your 1996-2003 Dodge 5.9L Cummins 47RE improves your transmission shift characteristics for firmer lockup, while reducing drain back and soft shifts.

I have a 1998 ram 2500 with 125k miles, that has the 8.0 v10, and a 47re, will this shift kit work for it, since it's made for a cummins?
View Staff Answer 
Yes. The TransGo SK-47RE Shift Kit will work on 47RE transmission that is gas or diesel powered.
Is the TRANSGO SK-47RE SHIFT KIT something that can be installed with the transmission in the truck (basically just a pan-off upgrade), or does the tranny have to be removed from the truck?
View Staff Answer 
The Manufactuer Transgo says that transmission removal is optional. However, these kits will require components like the valve body to be removed for installation of the modified Transgo components.

Ask a question about this product

Please allow up to 1 business day for reply.

More to Consider

Recently Viewed