Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Rigid Industries

New Product Filters!
Rigid 901801 Rear Facing 28” Chase LED Light Bar With Tube Mount 81276 6.90 Rigid 901801 Rear Facing 28” Chase LED Light Bar With Tube Mount
$ 649.99
The Rigid 901801 Rear Facing 28” Chase LED Light Bar With Tube Mount is the most advanced rear facing chase light bar on the market. This chase bar is an LED light that adds safety and functionality to any Jeep, buggy, UTV, or other off-road vehicle. By integrating running, brake, reverse, and turn signal lights into a single light bar, this chase light comes with everything you need. This unit comes pre-programmed and featured functions include: strobe, scroll, flashing, and “all on” capabilities. These functions are fully customizable and this light bar is race compliant for series requiring strobing blue, amber, green and red lights. This light bar has a total length of 28 inches and has programmable triggers: running and three auxiliary triggers. Each trigger can be program by the end user by choosing one of the 27 pre-programmed modes for a completely custom setup. The running and auxiliary triggers allow you to choose one of the pre-programmed modes already built into the light bar. You can also customize the triggers to your needs for an astounding 300,000 plus possible configurations. This light bar comes with adjustable tube mounts to fit 1.5 to 2 inch roll cages and a 13” lead for custom wiring. Features:9-16V DC Pressure Equalizing Vent Reverse Polarity Protection 27 Pre-Programmed Modes High Grade Aluminum Housing Over/Under Voltage Protection (2) 1.5 - 2" Tube Mount BracketsRunning and 3 Auxiliary Triggers High Impact Polycarbonate Lens Sleek Look - No Exterior Hardware IP68 Dust and Water Ingress Compliant Over 300,000 Possible Configurations SAE J575 Shock and Vibration Compliant User Defined Programming and Usage LED Colors: Red, White, Blue, Green and Amber Supports Running, Brake, Reverse, and Turn Signals Limited Lifetime Warranty Note: Professional installation is strongly recommended.
Rigid 901802 Rear Facing 28” Chase LED Light Bar With Surface Mount 81277 6.90 Rigid 901802 Rear Facing 28” Chase LED Light Bar With Surface Mount
$ 649.99
The Rigid 901802 Rear Facing 28” Chase LED Light Bar With Surface Mount is fully customizable chase LED light bar that is packed with features. This chase bar is an LED light that adds functionality and safety to any UTV, Jeep, buggy, or other off-road machine. By integrating turn signal, brake, reverse, running lights into a single light bar, this light bat includes everything you need. This chase light comes pre-programmed and features functions like strobe, flashing, scroll, and “all on” capabilities. These functions can be customized to any trigger and this light is race compliant for series requiring strobing blue, amber, green and red lights. This light bar has programmable triggers (running and three auxiliary triggers) and has a total length of 28 inches. All triggers can be programmed by the end user by selecting one of the 27 pre-programmed modes for a completely unique setup. The auxiliary and running triggers let you to choose one of the pre-programmed modes already installed into the light bar. You can also customize the triggers to your application for an incredible 300,000 plus possible configurations. This light bar comes with a 13” lead for custom wiring and 15-degree horizontal mounting brackets.Features:9-16V DC Pressure Equalizing Vent Reverse Polarity Protection (2) Surface Mount Brackets 27 Pre-Programmed Modes High Grade Aluminum Housing Over/Under Voltage Protection High Impact Polycarbonate Lens Running and 3 Auxiliary Triggers Sleek Look - No Exterior Hardware IP68 Dust and Water Ingress Compliant Over 300,000 Possible Configurations SAE J575 Shock and Vibration Compliant User Defined Programming and Usage LED Colors: Red, White, Blue, Green and Amber Supports Running, Brake, Reverse, and Turn Signals Limited Lifetime Warranty Note: Professional installation is strongly recommended.
Rigid Industries 1X2 LED Scene Light 27595 2.00 Rigid Industries 1X2 LED Scene Light
$ 94.99
The Rigid Industries 1X2 LED Scene Light is perfect for any area lighting application using DC power. Utilizing the latest LED technology, Rigid Industries perfected their innovative rugged design, thermally optimized heatsink, extreme output, and with minimal amp draw providing the total lighting solution. With a 115-degree horizontal spread, this product will light the surrounding area perfectly.Features: 9-36 V DCIP68 CompliantSold IndividuallyFlat Mounting SurfacePowder Coated Aluminum HousingAvailable with Cool White or Amber LEDs65 Horizontal Spread X 69 Vertical SpreadSpecifications: Watts: 9Amp Draw: 0.75LED's: 3Raw Lumens: 1100Lux @ 10m: 6.95Beam Distance: 26.4 mPeak Beam Intensity: 695 cd
Rigid Industries 20541 Ignite Surface Mount LED Backup Light Kit 31067 5.00 Rigid Industries 20541 Ignite Surface Mount LED Backup Light Kit
$ 149.99
The Rigid Industries 20541 Ignite Surface Mount LED Backup Light Kit is an easy solution for adding more light to the back of your truck for backing up at night. Most vehicles have very inadequate backup lighting, which can be a major safety problem. Rigid makes it easy to add compact and powerful backup lighting to any vehicle with the Rigid Ignite Backup Kit. The Ignite Series Accessory Lights are small but pack a lot of power with 1000 raw lumens in a light that measures just 1.4 x 1.4 x 2. The Backup Light Kits feature a surface mount style that can be used with GoPro surface mounts. While a wiring harness is not included, the powerful LEDs in each light consume less than one amp each, so powering them is often as easy as tapping into the vehicles existing backup lighting circuit.Features: Black HousingDiffused LensIP68 Compliant Easy InstallationSmall Package, Big Output Low Minimum Voltage: 6-28 VDC Rigid's Smallest Forward Projecting Light Specifications: Watts: 12LED's: 1 Raw Lumens: 1000Lux @ 10m: 9Beam Distance: 59.5m Peak Beam Intensity: 884.5 cd
Rigid Industries 20641 Ignite Flush Mount LED Backup Light Kit 31068 5.00 Rigid Industries 20641 Ignite Flush Mount LED Backup Light Kit
$ 149.99
The Rigid Industries 20641 Ignite Flush Mount LED Backup Light Kit provides you with an easy solution for adding more light to the back of your truck for backing up at night. Most vehicles have very inadequate backup lighting, which can be a major safety problem. Rigid makes it easy to add compact and powerful backup lighting to any vehicle with the Rigid Ignite Backup Kit. The Ignite Series Accessory Lights are small but pack a lot of power with 1000 raw lumens in a light that measures just 1.4 x 1.4 x 2. This Backup Light Kit features a flush mount design for in-bumped mounting. While a wiring harness is not included, the powerful LEDs in each light consume less than one amp each, so powering them is often as easy as tapping into the vehicles existing backup lighting circuit. Features: Black Housing Rigid's Smallest Forward Projecting Light Small Package, Big Output Low Minimum Voltage: 6-28 VDC IP68 Compliant Diffused Lens Specifications: Watts: 12 LED's: 1 Raw Lumens: 1000 Lux @ 10m: 9 Beam Distance: 59.5m Peak Beam Intensity: 884.5 cd
Rigid Industries 20731 Ignite Motorcycle Spot Light Kit 31069 15.00 Rigid Industries 20731 Ignite Motorcycle Spot Light Kit
$ 249.99
The Rigid Industries 20731 Ignite Motorcycle Spot Light Kit gives you additional lighting in a small, compact package. Most Motorcyles come factory with inadequate lighting, which can be a major safety problem. Rigid makes it easy to add compact and powerful lighting to any vehicle with the Rigid Ignite Backup Kit. The Ignite Series Accessory Lights are small but pack a lot of power with 1000 raw lumens in a light that measures just 1.4 x 1.4 x 2. These surface mount lights install easily using any GoPro Surface Mount. While a wiring harness is not included, the powerful LEDs in each light consume less than one amp each, so powering them is often as easy as tapping into the vehicles existing lighting circuit.Features: Watts: 12LED's: 1Spot Beam High/Low OptionRigid's Smallest Forward Projecting Light Unlimited Mounting Options Using GoPro Brackets (Not Included)Spot High Specifications:Raw Lumens: 1000Effective Lumens: 770Beam Width: 11 degPeak Intensity: 13939 cdLUX @ 10m: 139LuxBeam Distance: 236mSpot Low Specifications:Raw Lumens: 200Effective Lumens: 115 Beam Width: 11 degPeak Intensity: 1895LUX @ 10m: 19LuxBeam Distance: 87m
Rigid Industries 20741 Ignite Motorcycle Flood Light Kit 31070 5.00 Rigid Industries 20741 Ignite Motorcycle Flood Light Kit
$ 249.99
The Rigid Industries 20741 Ignite Motorcycle Flood Light Kit gives you additional lighting in a small, compact package. Most Motorcyles come factory with inadequate lighting, which can be a major safety problem. Rigid makes it easy to add compact and powerful lighting to any vehicle with the Rigid Ignite Backup Kit. The Ignite Series Accessory Lights are small but pack a lot of power with 1000 raw lumens in a light that measures just 1.4 x 1.4 x 2. These surface mount lights install easily using any GoPro Surface Mount. While a wiring harness is not included, the powerful LEDs in each light consume less than one amp each, so powering them is often as easy as tapping into the vehicles existing lighting circuit.Features: Watts: 12LED's: 1 Flood Beam High/Low OptionRigid's Smallest Forward Projecting Light Unlimited Mounting Options Using GoPro Brackets (Not Included)Flood High Specifications:High Raw Lumens: 1000Effective Lumens: 781Beam Width: 40 degPeak Intensity: 1786 cd LUX @10m: 18 LuxBeam Distance: 80mFlood Low Specifications: Raw Lumens: 200Effective Lumens: 128Beam Width: 40 degPeak Intensity: 239 cdLUX @10m: 2LuxBeam Distance:23m
Rigid Industries 2X10 LED Scene Light 27589 5.00 Rigid Industries 2X10 LED Scene Light
$ 512.24
The Rigid Industries 2X10 LED Scene Light is perfect for any area lighting application using DC power. Utilizing the latest LED technology, Rigid Industries perfected their innovative rugged design, thermally optimized heatsink, extreme output, and they combined it with minimal amp draw providing the total lighting solution. With a 115-degree horizontal spread, this product will light the surrounding area perfectly.Features: DC PowerExtreme OutputSold Individually 115-degree horizontal spreadThermally Optimized Heatsink TechnologyMinimum Amp Draw for the Total Lighting SolutionSpecifications: Watts: 76Amp Draw: 5.28LED's: 9Raw Lumens: 8,190Lux @ 10m: 21.84Peak Beam Intensity: 2,184 cd
Rigid Industries 2x2 115 Degree DC Scene Light 92064 3.00 Rigid Industries 2x2 115 Degree DC Scene Light
$ 269.99
The Rigid Industries 2x2 115 Degree DC Scene Light was specially developed for Rescue personnel and First Responders as an effective way to light up an accident scene. Available in a wide variety of sizes and options to suite your specific needs, these lights use the most current LED technology in a tough Rigid branded case along with a thermally optimized heat sink to ensure long life. The Rigid LED Scene Lights deliver up to 115° horizontal swath of light with minimal amp draw for maximum light coverage and robust mounting brackets that allow for precise positioning. Available in a durable UV-resistant white powder coated finish, these lights are also available in a chromate conversion coating for superior corrosion resistance. The Rigid LED Scene Lighting comes with the same legendary lighting technology and build quality as the rest of Rigids's lighting products, delivering dependable lighting on demand.Features:Instant On/Off - No Warm UpDurable Polycarbonate LensDesigned and Engineered in the USA
Rigid Industries 30112 AC/DC Charger For Dual 18650 Li-Ion Batteries 16059 2.00 Rigid Industries 30112 AC/DC Charger For Dual 18650 Li-Ion Batteries
$ 20.24
The Rigid Industries 30112 AC/DC Charger For Dual 18650 Li-Ion Batteries allows you to charge two Halo Torch batteries simultaneously. A full charge takes only 4 hours. It features both a 110v receptacle adapter and a 12v cigarette lighter adapter. Features:Charge Two Halo Torch Batteries At Once 110V Receptacle and 12V Cigarette Lighter Adapter
Rigid Industries 360-Series LED Fog Light 91730 3.22 Rigid Industries 360-Series LED Fog Light
$ 367.99
Rigid introduces the Rigid Industries 360-Series LED Fog Light for your vehicle. This Light optimizes beam patterns, projects up to 8,600 raw lumens, and is protected by an aluminum housing. With a blacked-out circuit board and limited lifetime warranty, this Light is one of most robust and useful round lights on the market. Rigid's 360-Series Lights are available with an array of options: 4-inch or 6-inch diameter, different beam patterns from 17 degrees to 60 degrees, preferred backlight color (red, white, blue or amber), and beam pattern to fit your unique needs and style. Rigid's 360-Series round lights easily integrate into multiple factory applications. Harness not included.Features:Alloy Housing and HeatsinkWiring Harness Sold SeparatelyStainless Steel Mounting Bracket IncludedIP68 Compliant Against Dust and Water IngressAvailable Backlight Colors: Red, White, Blue or Amber
Rigid Industries 360-Series Light Cover 91750 0.20 Rigid Industries 360-Series Light Cover
$ 31.49
The Rigid Industries 360-Series Light Cover is a complete solution for function and style. Give your vehicle a look all it's own while also safeguarding your investment. These light covers are constructed out of durable polycarbonate plastic that gives an extra layer of protection to your LED light lens. Each cover snaps on and off, so installation and removal is a cinch and are a great addition for regions that require covers on accessory lights. Available colors are: amber, clear, smoke or black. Each kit contains 2 light covers.Features:Kit Includes 2 CoversPolycarbonate PlasticEasy To Snap On and OffExtra Layer of Protection
RIGID Industries 36360 10' Wiring Harness 80746 1.00 RIGID Industries 36360 10' Wiring Harness
$ 78.74
The RIGID Industries 36360 10' Wiring Harness is specifically designed to make the installation of 1 pair of Rigid Industries 360-Series LED Fog Light a straightforward. This wiring harness features a 3-position switch (on/ off/ backlight only on), battery terminal connectors, and a 60 Amp 14V DC relay. Engineered to work with a 12V electrical system, this harness includes flying leads for universal fitment and a fuse holder with 20 Amp fuse to safety. Features: 10' Wiring Harness20 Amp Fuse IncludedLimited Lifetime Warranty3 Position Switch Included 60 Amp 14V DC Relay Included Flying Leads For Universal Fitment
Rigid Industries 40004 Suction Cup Mount Kit 19930 2.00 Rigid Industries 40004 Suction Cup Mount Kit
$ 56.99
The Rigid Industries 40004 Suction Cup Mount is the answer for anyone that is looking to use their lights for multiple applications. Designed to hold a single SR-Q or a pair of SR-M LED lights, the built-in suction cups feature a strong hold and can be used in all weather conditions. The included wiring harness simply plugs into your 12V power source and powers up two lights. Features: Black Powder Coat FinishStainless Steel ConstructionFits Single SR-Q Or 2 SR-M
Rigid Industries 40009 12V Cigarette Lighter Adapter Harness 19539 2.00 Rigid Industries 40009 12V Cigarette Lighter Adapter Harness
$ 37.99
The Rigid Industries 40009 12V Cigarette Lighter Adapter Harness is perfect for temporary lighting applications. It has a 12v automotive cigarette lighter adapter on one end and two Deutsch plugs on the other that allow for use with one or two LED lights.Features: 12V Adapter Harness Allows For One Or Two Lights Two Deutsch Plugs For Plug and Play
Rigid Industries 40015 Q-Series Flush Mount Bucket 32398 2.00 Rigid Industries 40015 Q-Series Flush Mount Bucket
$ 80.74
The Rigid Industries 40015 Q-Series Flush Mount Bucket gives you a place to mount your Rigid Q-Series and Q2-Series LED Lights. Perfect for mounting in the side of a trailer, ambulance, fire vehicles, and more. Welded stainless steel construction with durable Tiger Series 38 Black powder coat. Gasket provided for sealed mounting. Features: For Rigid Q-Series LED Lights Welded Stainless Steel Construction Gasket Included For Sealed Mounting
Rigid Industries 40052 Pendant Switch Kit 19979 1.00 Rigid Industries 40052 Pendant Switch Kit
$ 36.74
The Rigid Industries 40052 Pendant Switch Kit gives you the ability to install a clean, convenient switch for your Rigid Industries lights. Features:Quality ConstructionHassle-Free Installation
Rigid Industries 40165 Roof Mount Brackets 23525 3.00 Rigid Industries 40165 Roof Mount Brackets
$ 167.19
The Rigid Industries 40165 Roof Mount Brackets for your 2014-2015 GM 2500HD/3500HD Pickup are built specifically for your truck. Featuring a steel construction that is UV resistant, abrasion resistant, with a polyester based powder-coat. These mounts fit the E-Series 50 LED Light Bar to perfection. Features: Durable, Steel Construction UV and Abrasion Resistant CoatingFits Rigid Industries 50" E-Series Light Bar
Rigid Industries 40190 Hi/Po Light Bar Wiring Harness 16080 1.00 Rigid Industries 40190 Hi/Po Light Bar Wiring Harness
$ 39.74
The Rigid Industries 40190 Hi/Po Light Bar Wiring Harness includes 13' of wiring and is designed to connect a single 40" ~ 50" LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following Rigid Industries LED Lights: 50" E-Series, 40" E-Series, 50" SR-Series.Features: Waterproof Switch Fits 40"-50" E-Series Fits 50" SR-Series
Rigid Industries 40191 Lighted Rocker Switch 9880 1.00 Rigid Industries 40191 Lighted Rocker Switch
$ 10.49
This water resistant switch with an IP65 rating features a lit 12V rocker with protective rubber boot and is a great addition to any Rigid Industries Lighting System. This switch will fit all Rigid Industries Wiring Harnesses. Features: IP65 Rating Lit 12V Rocker Protective Rubber Boot