AEM 21-9211D Brute Force HD Intake System

PART# | SKU
★★★★★ ★★★★★ 4.3 (10 Reviews)

Vehicle Fitment For:
2003-2006 Dodge with 5.9L Cummins Engine

See full application list below
Discontinued
In-Stock
Ground Delivery by ,
If you order within hr min
This product cannot be shipped to your destination
Not Shipping to ?
Need it faster?

Description

Add a AEM 21-9211D Brute Force HD Intake System to your 2003-2006 Dodge 5.9L Diesel to upgrade the performance of your engine with minimal installation. The Brute Force Intake System has a specially designed filter housed in the original air box space and protected by a heat shield which creates cleaner and cooler air for increased horsepower and torque. The air filter is made from synthetic material that is oil free and can be easily cleaned and reused. 

Features:
  • Increased Horsepower
  • Easy to Install Using Commonly Available Tools
  • Tuned and Dyno-Tested to Improve Acceleration and Engine Sound

Manufacturer Warranty*:
1 Year Limited

Instructions & Tech Info

Installation Info

Reviews

Overall Rating
4.3/5
10 Reviews
 
★★★★★ ★★★★★
All around fairly easy
Billy B | July 23rd, 2020
I only give it a 4 because it doesn't come with a rubber boots alloying for engine movement and I had a small dent on one end of the aluminum pipe. Other than that pretty easy, put the filter in the cold air box before installing the aluminum pipe is installed, I don't believe it will fit afterwards. Other than that sounds good runs good.
 
★★★★★ ★★★★★
An intake that does fit '06
Anonymous (Unknown) | October 17th, 2007
I ordered this intake for my '06 cummins and it works fine. There is an error on the website about the year it will fit the '06 model. It was easy to install. Don't tighten anything down until the very end. I was nervous about taking the old air monitor off the stock box but after a tug it came out in one peice. There is another rubber garment that you use to place it in the tude. One suggestion I do want to make is not to put in the tree zip ties until after the complete install. I found it impossible to zip tie things, once the intake was in and I began to zip tie things I was unable to feel where the opening was. I simply removed it with a hammer and then tied everything in a very LARGE LOOP so the tie was start then treated it into the heat sheild and finnished tightening as needed. You'll flow more air and notice an increase in turbo noise nothing to worry about.An addition note. The OEM T6 screws you will discard when done. This kit comes with replacements that are long and use an alan wrench.
 
★★★★★ ★★★★★
Great intake!
Kenney (Alamogordo, NM) | November 21st, 2009
This intake is easy to install and performs well. I've been modifying cars for a long time and AEM has been too. I decided to buy this intake because intakes are what AEM does best.
 
★★★★★ ★★★★★
Breathe Easy With This System
Trey (Montgomery, AL) | November 23rd, 2010
I drive OTR a 2007 Dodge Ram 3500 Quad Cab 4x4, with 270,000 miles todate. I spoke directly with a Cummins rep a few years back about the mpg I could expect with a truck in this configuration. She told me off the bat not to realistically expect any more than 17-19 mpg from this stock configuration. She hit it right on the nose.I've been through two different makes of programmers, one even being an "economy" single setting, and performance filters. Lots of power but no consistent mileage improvement. I asked a truck outfitter I do business with what he would recommend for mileage vs. cost and without hesitation he said "first get your foot out of it, then buy a good air intake system. Let it breath."I shopped around and decided on the AEM system a couple of weeks ago, its a little more expensive but decided on AEM based on a couple of the competitor's bad reviews. The system was easy to install, but before you tighten everything down, unless you have the hands of a 7 year old, you may have to remove the filter element itself to get to all the nuts, bolts, and especially the zip ties, then replace the filter.I made it home last night from a 3500 mile trip with the new AEM system and the "economy" programmer plugged in, hauling 3 different size boats to locations around the southeast, calculated overall loaded/deadhead mileage from home to all points back with 15.5 mpg. My overall is usually 13-14 mpg. I checked my unloaded mileage on the 350 mile stretch down I-85 which was 20.3! Prior to last night, my best was 19.1 two years ago, and never broke 19 mpg again.Sorry I'm longwinded, but wanted to give a realistic expectation. The system gave my Dodge the kick it needed to notch up my mpg, the turbo growls a little more and really whistles a tune for you, and after wipin things down under the hood, the polished aluminum even makes this Dodge look good (IMHO)!By the way, talk to XDP if you have a 2007 Dodge. It WILL FIT a 2007 5.9L Cummins
 
★★★★★ ★★★★★
brute force hd
Brad (wisconsin) | June 22nd, 2011
The install was super easy except for the tree zip ties but if you just wait till the end like one of the other reviews said its not to bad. I gained between 1.5 to 2 mpg's on my 06 dodge 2500. I also noticed faster spooling and better throttle response. I recommend this product to anyone who wants to improve their ride.
 
★★★★★ ★★★★★
05 Dodge 2500 Cummins
Dillon (Aiken, SC) | December 21st, 2011
I bought this intake system for my 05' Dodge Cummins. The instructions were a little bit confusing. But once it was installed the turbo was a lot more pronounced. Also a lot better throttle response. Went great with the MBRP turbo back straight pipe system. Overall a great purchase!
Write a Review

Review this product and help other XDP customers make informed decisions!

Overall Rating
Your Information

Frequently Asked Questions

What the difference between the AEM21-8211D & the AEM21-9211D
The AEM 21-8211D is considered the "AEM Brute Force" and the AEM 21-9211D is considered the "AEM Brute Force HD". AEM has engineered their Brute Force HD intakes to deliver maximum flow, filtration and durability for heavy duty applications and they even outperform the "AEM Brute Force" intakes in both dust holding capacity and filter flow.
Ask A Question
Ask a question about this product
Please allow up to 1 business day for reply.

More to Consider

Specifications

ID 1609
Manufacturer Name AEM
Shipping Weight 15.00 lb.
Shipping Length 14 in.
Shipping Width 24 in.
Shipping Height 14 in.
Fuel Type Diesel
E-Code 2
EO Number d-670-15
Manufacturer Warranty* 1 Year Limited
Prop 65 Prop 65 WarningWARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
Internal LR

Recently Viewed

ITEM ADDED TO CART

Complete the job with these highly suggested add-on products.

Product prices marked with an * may require additonal fees, such as a core charge, which will be displayed in the cart.