KC Turbos 300222 KC300X Series Stage 2 Turbo (63/73)

Enhance the performance of your 1999 Ford 7.3L Powerstroke with the KC Turbos 300222 KC300X Series Stage 2 Turbo (63/73). This turbo is equipped with a 4" ported housing that has drilled anti-surge for improved flow. It also features a 63mm 7x7 SXE style compressor wheel with extended tip technology, and a 73mm SXE style turbine wheel. The KC300x is a dependable journal bearing drop-in turbo that is ideal for boosting your 7.3 Powerstroke's performance.

You will notice the significant difference this turbo can make in waking up your 7.3! KC Turbo has rigorously tested it for durability, proven its capabilities on the dyno, and at the racetrack. For those with dedicated tow rigs and daily drivers, the .84 A/R Housing offers a faster spool and cooler EGT's below 3000 RPMs. The upgrade of an Non-EBPV Pedestal can yield significant advantages. Another option that should be considered is adding a tuner to your vehicle. Each upgrade can improve the performance and efficiency of your Stage 2 turbocharger.

Features:

• .84 A/R
• 73mm SXE Style Turbine Wheel
• Comes With New 4" Intake Boot
• High-Flow Non-EBPV Outlet Flange
• Upgraded 360 Thrust Journal Bearing Design
• Comes With All Gaskets And O-rings To Install
• 100% Drop-In Turbo (No Modifications Required)
• Adjustable Wastegate Actuator For Increased Boost Control
• 4" Ported Compressor Housing With Drilled Anti-Surge For High Flow
• 63mm 7x7 SXE Style Compressor Wheel With Extended Tip Technology

Exhaust Brake Note:
Some exhaust brakes may have clearance issues that can cause the brake to hinder performance, rub the turbine wheel, or cause other issues. These brakes typically use some type of flapper to close which causes extreme exhaust back pressure to aid in braking. This can be hard on a turbo and motor and is not recommended. It will be up to the customer to verify fitment and functionality.

Note: These turbos are designed to fit directly in 7.3 equipped pick-up trucks. Although the turbos can drop into 7.3 equipped Vans, you will need to modify the turbo intake boot and down-pipe for proper fitment.