Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Dynatrac Free-Spin Hub Kit 10586 50.00 Dynatrac Free-Spin Hub Kit
5 5 2
$ 1889
Dynatracs Free-Spin heavy duty hub conversion kits are designed to replace the factory unit bearings with a fixed spindle design for superior strength, reliability, safety, and performance. While the factory unit bearing is non-serviceable, cannot be inspected, and prone to failure, the Free-Spin Hub Conversion offers ease of maintenance, a much smoother ride, greater fuel economy on Dodge trucks, and longer axle life. The simple bolt-on kit includes common and serviceable Timken bearings, chromoly spindles, cast nodular wheel hubs, Warn Premium manual locking hubs, and massive 1.50 diameter, 35-spline outer axle shafts. Consider an upgrade and substitute the Warn Premium locking hubs to Dynatracs Dynaloc manual locking hubs for greater strength, reliability, and a short, custom machined bezel to improve your hubs looks. All parts are made in the USA. Features: Increases reliability Lower cost of ownership- Parts can be easily serviced for longer life Simple bolt on installation No machining or welding Smoother ride and better handling Reduce wear and increase mileage Ford Application Notes: Coarse studs are 14mm x 2.0 Fine Studs are 14mm x 1.5 Dodge Application Notes: Dodge Dually (DRW) - This product will require specialty wheel adapters (not included) for use on Dodge Dually models. *ABS is not supported on early Dodge applications. 2013-2016 Models - OEM Wheels with Center Cap will not fit with this upgrade. Aftermarket wheels are required.
Yukon YA W26030 Center Axle Disconnect Eliminator - Dana 60 35477 28.10 Yukon YA W26030 Center Axle Disconnect Eliminator - Dana 60
$ 362.14
Don't let the unreliable factory vacuum operated center axle disconnect (CAD) in your 1994-1999 Dodge Ram 2500/3500 leave you stranded with no 4wd function, replace it with the Yukon 30-Spline Dana 60 Center Axle Disconnect Eliminator YA W26030. This kit eliminates the vacuum disconnect found in the front axle and replaces the two piece axle shaft with a one piece 4340 Chromoly axle, ensuring reliable 4wd performance. No having to worry if your 4wd is working this season or fumbling with cable lockers which need adjustment and can cause partial engagement issues. Yukon also includes a vacuum block-off plate, gasket, and axle seal so you can get the job done right the first time. Features:Eliminates CADProvides Reliable 4wd PerformanceOne-Piece 4340 Chromoly Axle ShaftIncludes Block-Off Plate, Gasket, And Axle SealNotes: Fits Dana 60 30-spline axles.Compatible Make / Model:Dodge Ram 2500 3/4 Ton (1994 - 1998)Dodge Ram 3500 1 Ton (1994 - 1998)Application Note:Compatible Makes and Model Chart is for reference only. You must physically confirm the specific differential type in your vehicle for proper fitment as factory options may vary.
Yukon YA W26032 Center Axle Disconnect Eliminator - Dana 60 35478 41.02 Yukon YA W26032 Center Axle Disconnect Eliminator - Dana 60
$ 601.67
The Yukon 35-Spline Dana 60 Center Axle Disconnect Eliminator YA W26032 replace the unreliable vacuum center axle disconnect (CAD) in your 1994-1999 Dodge Ram 2500/3500 with a full length 4340 chromoly axle for superior 4wd operation. This kit not only replaces the long side inner axle with a one-piece shaft but also includes the short side inner shaft as well, making it perfect for those who want to upgrade to the strength of a 35-spline inner axle setup. No having to worry if your 4wd is working this season or fumbling with cable lockers, which need adjustment and can cause partial engagement issues.Yukon completes this kit with the CAD block-off plate, gasket, and special axle seal.Features:Eliminates CADProvides Reliable 4WD Performance4340 Chromoly 35-Spline Inner Axle Shafts Includes Block-Off Plate, Gasket, And Axle SealNotes: Fits Dana 60 35-spline axles.Compatible Make / Model:Dodge Ram 2500 3/4 Ton (1994 - 1998)Dodge Ram 3500 1 Ton (1994 - 1998)Application Note:Compatible Makes and Model Chart is for reference only. You must physically confirm the specific differential type in your vehicle for proper fitment as factory options may vary.
Yukon YA WU-03 Spin Free Locking Hub Conversion Kit 10119 104.22 Yukon YA WU-03 Spin Free Locking Hub Conversion Kit
$ 2208.23
The Yukon YA WU-03 Spin Free Locking Hub Conversion Kit fits your 1994-1999 Dodge Dana 60. The Yukon worry free Spin Free Kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon. This hub kit also includes low-profile Yukon Hardcore premium locking hubs, giving you more driving selectability. This kit includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installation. This kit is not compatible with vehicles with 4-wheel ABS.Features:Eliminates the weak OEM unit bearingConverts to a stronger, wider spaced tapered wheel bearingIncludes upgraded 4340 chrome-moly outer stubLocking hub allows for a free spin of the front wheels in 2WD (without spinning the drive shaft)Improved MPGLess wear on front end partsCompatible Make / Model:Dodge Ram 2500 3/4 Ton (1994 - 1999) Dodge Ram 3500 1 Ton (1999)Application Note:Will not work with vehicles that have 4 wheel ABS or dual rear wheels.Compatible Makes and Model Chart is for reference only. You must physically confirm the specific differential type in your vehicle for proper fitment as factory options may vary.
Yukon YA WU-04 Spin Free Locking Hub Conversion Kit 10120 93.00 Yukon YA WU-04 Spin Free Locking Hub Conversion Kit
$ 1782.25
The Yukon YA WU-04 Spin Free Locking Hub Conversion Kit fits your 2000-2008 Dodge D60 and 9.25 front, single rear wheel design. The Yukon worry free Spin Free Kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon. This hub kit also includes low-profile Yukon Hardcore premium locking hubs, giving you more driving selectability. This kit includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installationFeatures:Eliminates the weak OEM unit bearingConverts to a stronger, wider spaced tapered wheel bearingIncludes upgraded 4340 chrome-moly outer stubLocking hub allows for a free spin of the front wheels in 2WD (without spinning the drive shaft)Improved MPGLess wear on front end partsFor Dodge D60 and AAM 9.25Single Rear Wheel (SRW) onlyCompatible Make / Model:Dodge Power Wagon (2005 - 2008) Dodge Ram 1500 1/2 Ton (2006 - 2008) Dodge Ram 2500 3/4 Ton (1999 - 2008) Dodge Ram 3500 1 Ton (1999 - 2008) Application Note:Compatible Makes and Model Chart is for reference only. You must physically confirm the specific differential type in your vehicle for proper fitment as factory options may vary.