Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Alliant AP63458 Accelerator Pedal Position Sensor (APPS) 14444 1.00 Alliant AP63458 Accelerator Pedal Position Sensor (APPS)
$ 155.23
The Alliant AP63458 Accelerator Pedal Position Sensor is a replacement for your factory APPS sensor. A "dead pedal" as well as diagnostic trouble codes are common symptoms of a faulty sensor. This sensor is designed for applications where the is APPS mounted under the intake horn on the driver side of the engine. Fits both automatic and manual transmissions. Applications: 1998.5-2002 5.9L ISB w/VP44 2003-2004 5.9L ISB w/Common Rail Note: Will not fit on 2004 applications where APPS is located under battery
ATS 2029062272 Electronic Fuel Regulator 18181 1.00 ATS 2029062272 Electronic Fuel Regulator
$ 66.27
The ATS 2029062272 Electronic Fuel Regulator prevents over boost codes and defueling of the engine due to higher boost pressures on your 2003-2007 Dodge 5.9L Cummins. This is essential when doing any power modifications, if the turbo produces more boost pressure than what the computer wants to see. The computer will throw codes and defuel. The Electronic Fuel Regulator will allow you to get the full potential out of your truck. Features: Eliminates Over-boost Codes Simple, Plug and Play Installation
Auto Meter 5323 OBDII Splitter 34039 1.00 Auto Meter 5323 OBDII Splitter
$ 39.95
Use multiple OBDII devides with the Auto Meter 5323 OBDII Splitter. This low profile OBDII Signal Splitter / Pass Through allows for remote location of connections for OBDII products like the Auto Meter AirDrive, DashLink and Dash Control while providing an easy to access connection point for other onboard devices requiring access to the OBDII data stream. Features: OBDII Splitter Allows For Multiple OBDII Devices Compatible With Most 1996+ OBDII Vehicles
BD-Power 1036620 High-Idle Kit 23131 2.00 BD-Power 1036620 High-Idle Kit
3.5 5 2
$ 265
The BD-Power 1036620 High-Idle Kit for your 98.5-04 Dodge 5.9L Cummins works great with remote starters, PTO's and extended idling applications. Warm up your engine faster on cold mornings with BD Diesel's High Idle Kit. Quick and easy install, the High Idle switch mounts on the dashboard and plugs in under the dash. The rotating switch allows for adjustable high idle speeds - 900 / 1200 / 1500 / 1800 / 2100 RPM.Features: Quick and Easy Installation In-Cab Adjustable SwitchAdjustable High Idle Speeds Application Note: Only fits on 2003-2004 models with Bell Crank APPS.
BD-Power 1057650 Speed Eliminator w/RAD Tech 589 1.00 BD-Power 1057650 Speed Eliminator w/RAD Tech
4 5 3
$ 125
You asked for it, now BD delivers. We have limited supply of the new hot Speed Eliminators. Is the factory 95mph speed limit not fast enough for you? How about 130mph+!!! Sounds great doesn`t it, all this new power and the top end MPH too. Easy underhood installation makes everything a breeze. Just be sure to have those Z rated tires handy.
BD-Power 1057655 Speed Eliminator w/ Tire Size Calibration 588 1.00 BD-Power 1057655 Speed Eliminator w/ Tire Size Calibration
3 5 1
$ 125
You asked for it, now BD delivers. We have limited supply of the new hot Speed Eliminators. Is the factory 95mph speed limit not fast enough for you? How about 130mph+!!! Sounds great doesn`t it, all this new power and the top end MPH too. Easy underhood installation makes everything a breeze. Just be sure to have those Z rated tires handy.
BD-Power 1057720 Staging Limiter 21324 2.00 BD-Power 1057720 Staging Limiter
$ 450
Get off the line with authority in your 1998.5-2004 Dodge 5.9L Cummins* with the BD-Power 1057720 Staging Limiter. You will no longer have to deal with the frustrations involved with over and under boosts after the brief install of the Staging Limiter. Control your Turbo Boost or Engine RPMs with ease and get your Dodge off the line faster and more consistently than ever before with the BD-Power 1057720 Staging Limiter. When you find the perfect settings for your Turbo Boost or Engine RPMs, the Staging Limiter enables you to easily hold the brake and throttle while preparing to launch. When your brake is no longer depressed, your truck will launch with ferocity that will be sure to turn heads. Features:Easy InstallConsistent 1/4 Mile Times Eliminates Over and Under Boosted Launches Note: 2003-2004 must have bell crank mounted APPS.
BD-Power 1081160 Cool Down Timer 2 848 1.00 BD-Power 1081160 Cool Down Timer 2
4 5 3
$ 200
The BD-Power 1081160 Cool Down Timer 2 eliminates the problems of shutting your engine down after a heavy haul when the exhaust gas temperature (EGT) is above normal. This can result in turbo bearing damage, but now you can protect your turbo with BDs Cool Down Timer (CDT). The CDT works with any K-Type EGT probe commonly found in most pyrometer gauge kits and has adjustable shut down temperature setting. Plus, five-minute timeout and quick shut down functions. The new design of the CDT adds increased troubleshooting ability and new installation features plus the ability to work with vehicle security alarms and in reducing regeneration of the DPF on 2008-up vehicles. Temperature shutoff requires the purchase of the EGT Probe (sold separately, see below). Features: Shut Down By Timer Shut Down By Temperature (Requires Probe) Avoid Turbocharger Damage Works With Any K-Type EGT Probe (Sold Separately, See Below) Application Note: Will not work on Push-Button start Ford Trucks.
BD-Power 1300030 Dodge APPS Noise Isolator 4642 1.00 BD-Power 1300030 Dodge APPS Noise Isolator
5 5 21
$ 29
Eliminate the interference in the throttle position sensor in your 1994-2004 Dodge 5.9L Cummins with the BD-Power 1300030 Dodge APPS Noise Isolator. The interference that is common on these trucks creates false voltage readings in the Accelerator Pedal Position Sensor (APPS) circuit. These false readings cause the torque converter lock-up to cycle rapidly on and off as you're driving. This easy fix allows you to remove the interference and restore proper lock-up operation. Features:Easy InstallationEliminates Interference In APPS CircuitEliminates Torque Converter Clutch Cycling
BD-Power Turbo Boost Builder 1645 3.00 BD-Power Turbo Boost Builder
3.84 5 25
$ 67
Turbo Boost Builders To get more performance out of your Dodge turbo, plug in BD's electronic Boost Builder, which increases fueling on electronically controlled engines, increasing exhaust volume and boost pressure - plus it prevents over boost trouble codes. Note: The BD Boost Fooler will not work on 2010-2012 Cab and Chassis models with Urea Systems.
Bully Dog 40400-105 Universal OBDII Block 25724 1.00 Bully Dog 40400-105 Universal OBDII Block
$ 34.84
The Bully Dog 40400-105 Universal OBDII Block fits the Bully Dog WatchDog and GT Tuner. It can also be used with the HandS Performance Mini Maxx and Black Maxx Tuners.
Bully Dog Sensor Station w/ Pyrometer Probe 40384 13754 2.00 Bully Dog Sensor Station w/ Pyrometer Probe 40384
$ 169.99
The Bully Dog Sensor Station is an add-on that allows you to read EGT's on your GT Tuner, PMT and Watchdog. Additional sensors such as thermocouples, speed sensors, boost sensors and liquid temperature sensors can also be added to monitor even more on your Bullydog Tuner! Note: Pyrometer probe is included, 40387 probe below is additional and not required unless replacement is needed or additional sensors are desired.
Diesel Turbo Lifesaver CM1E Control Module 34152 1.00 Diesel Turbo Lifesaver CM1E Control Module
$ 236.5
Protect your turbocharger and allow for proper cool-down with the Diesel Turbo Lifesaver CM1E Control Module. The Diesel Turbo Lifesaver is designed to automatically idle your engine and turn it off without needing the ignition key, thus saving the time and aggravation of waiting for the turbo to cool down.When you shut off a hot engine, the oil used to lubricate your turbocharger sits uncirculated and gets cooked into a carbon coating that builds up on your turbo shaft. Over time, this can cause your turbocharger to seize requiring you to spend thousands on repairs. The Diesel Turbo Lifesaver gives you the ability to adjust your engine run time from 1 to 250 minutes to allow for a proper cool down. It also features a built-in security feature to safeguard your vehicle and can be used as a pre-luber in some applications to maximize the life of your engine. Features:Computer Controller For Precision TimingBuilt-In Anti-Theft Security Feature 3-Year Unlimited Mileage Warranty Made In The USA!Note: Control module only, required install kit is not included. See related items for specific applications. Installation Kit Guide: 1994-2002 Dodge Diesel Pickups (Use D1K Installation Kit)2003-2005 Dodge Diesel Pickups (Use D2K Installation Kit) 2006-2008 Dodge Diesel Pickups (Use D3K Installation Kit)1994-1997 Ford Diesel Pickups (Use F1K Installation Kit)1999-2004 Ford Diesel Pickups (Use F1AK Installation Kit)2005-2007 Ford Diesel Pickups (Use F2K Installation Kit)2008 Ford Diesel Pickups (Use F3K Installation Kit)1999-2001 Ford Doorlock Interface Kit (Use F1 and F1AK Kit)1999-2002 Ford Factory Alarm Interface Kit (Use F2 and F1AK Kit)2001-2007 GM Duramax Pickups (Use G1K Installation Kit)
Diesel Turbo Lifesaver D2K Install Kit 265 2.00 Diesel Turbo Lifesaver D2K Install Kit
5 5 1
$ 31.5
Use the Diesel Turbo Lifesaver D2K Install Kit to easily install the Diesel Turbo Lifesaver on your 2003-2005 Dodge 5.9L Cummins. Diesel Turbo Lifesaver allows you to set an engine idle sequence to properly cool your turbocharger before engine shutdown. CM1E Turbo Timer Module is required for use and sold separately. Features: Installation Kit Works With CM1E Module (Sold Separately)
Edge Products 98202 Back-Up Camera 1245 6.00 Edge Products 98202 Back-Up Camera
5 5 2
$ 179.95
Xtreme Diesel Performance is an Authorized MVP dealer. We would like you to shop with confidence knowing your purchase is covered by the manufactures warranty. The Edge Products 98202 Back-Up Camera is designed to work with the Edge Products CTS and CTS2 Monitors (not included) that have a built-in video port allowing you to connect Edge's state-of-the-art back-up camera. The CTS/CTS2's high resolution, color screen allows users to see what's going on behind them with the Edge camera connected to their existing CTS/CTS2. The camera mode automatically engages when the vehicle goes into reverse*. The back-up camera option is a must have for towers and safety-conscious drivers. Features: Elegant Design Durable Black Metal Finish Adjustable Camera Angle Parking Guide Lines Night Vision LED's Waterproof (IP67) Quick and Easy Installation Reverse/Non-Reverse Image Switch (option) Fits CTS and CTS2 Monitors (sold separately) *Camera automatically engages on most supported vehicles with automatic transmission, it will not automatically engage on manual transmission models
Edge Products 98609 EAS Power Switch w/ Starter Kit 19872 2.00 Edge Products 98609 EAS Power Switch w/ Starter Kit
$ 115.95
The Edge Products 98609 EAS Power Switch is an excellent upgrade for anyone that has or is planning to get an Edge Products CTS. This power switch wiring harness gives you the ability to install accessories such as lights or an air compressor and engage them from the CTS. Due to the easily customizable software you can name your accessory right on the screen and power your accesory right from your CTS Monitor. Features: Control Accessories From CTS Easy To Install and Operate Includes EAS Power Switch w/ Starter Kit
Edge Products 98615 EAS 12V Power Supply Starter Kit 28096 1.00 Edge Products 98615 EAS 12V Power Supply Starter Kit
$ 40.55
The Edge Products 98615 EAS 12V Power Supply Starter Kit allows the Insight CS2 and CTS2 to work on vehicles that don't have an OBDII port! By connecting to a key-switch power and ground source, an Insight becomes a digital gauge display for anything that you want to monitor! With the separate purchase of the EAS system, you can monitor EGTs, pressure readings, temperature readings, and much more. Features: 12V Harness For Non-OBDII Applications Works With Edge Products Insight CS2 and CTS2
Edge Products 98616 EAS Control Kit 28097 1.00 Edge Products 98616 EAS Control Kit
$ 208.95
The Edge Products 98616 EAS Control Kit allows you to monitor EGT's and adds the power switch to control multiple accessories with an on/off digital power switch. The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS Power Switch is a tremendous new feature for truck owners! Customers can now hook up accessories like aftermarket lights, air compressors, etc. and engage them from the CTS/CTS2 device. Install the new switch and either use Edge's MyStyle software to name your accessory or with the CTS2 rename those accessories right from your device. The CTS2 comes with an all-new screen layout that can monitor up to 6 gauges and 4 rocker switches for the ultimate control. Take advantage of Edge's clean EAS daisy chain link system to turn your truck's tools on/off. Features: For CTS and CTS2 Add Power Switch Monitor EGT's Kit Includes: EAS Starter Kit EAS EGT Probe EAS Power Switch
Edge Products 98617 EAS Competition Kit 28098 2.00 Edge Products 98617 EAS Competition Kit
$ 364.95
The Edge Products 98617 EAS Competition Kit is the perfect option for those enthusiasts that want to maximize the use of their Edge Insight. The EAS Compeition Kit gives you the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners who have upgraded turbo or turbo's and other mods ,where the stock sensors just aren't enough anymore. This kit is ideal for trucks participating in dyno competitions, sled pulls, and drag racing. The EAS EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS 0-100 PSIg Boost Sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. Simply install this sensor, use MyStyle to set up the sensor, and have the ability to see what kind of boost you can build. Or maybe you are trying to fine tune your truck and need to install a drive pressure sensor or fuel pressure sensor the Edge 0-100 PSIg sensor is your answer. The EAS Temperature Sensor is a -40F to 300F 1/8 NPT sensor that will allow you to monitor things like Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Another great solution for those with aftermarket accessories. Additionally, Edge Products has updated their Data Logging Software to now export all data logs into a CSV (Excel) file to save and compare runs, view, graph and improve tuning. To view CSV data log files, you must use MyStyle software or export it from MyStyle software. These new releases make the Insight CS2 and CTS2 the industry leader in digital gauge/data logging for any enthusiast! Features: Fits Edge CS/CS2 and CTS/CTS2 Includes Multiple Sensors For Monitoring Vitals Kit Includes: EAS Starter Kit EAS EGT Probe EAS Universal 5 Volt EAS 0-100 PSig Pressure Sensor EAS -40F To 300F Temperature Sensor
Edge Products 98618 EAS Data Logging Kit 28099 3.00 Edge Products 98618 EAS Data Logging Kit
$ 676.95
The Edge Products 98618 EAS Data Logging Kit is the ultimate component kit for maximizing the use of your Edge Insight. This kits gives users the ability to monitor EGTs in two different locations, two 0-100 PSIg boost sensors, and two -40F to 300F temp sensors for unmatched monitoring. This kit is designed for truck owners who have upgraded turbo or turbo's, and other mods where the stock sensors just aren't enough anymore. Truck owners who use trucks for dyno competitions, sled pulls, and drag racing need this kit. Fine tuning these trucks can be difficult, but with the Edge Data Logging Kit you can log runs, view logs, and make adjustments as needed for maximum performance. The EAS EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS 0-100 PSIg Boost Sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. Simply install this sensor, use MyStyle to set up the sensor, and have the ability to see what kind of boost you can build. Or maybe you are trying to fine tune your truck and need to install a drive pressure sensor or fuel pressure sensor the Edge 0-100 PSIg sensor is your answer. The EAS Temperature Sensor is a -40F to 300F 1/8 NPT sensor that will allow you to monitor things like Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Another great solution for those with aftermarket accessories. Additionally, Edge Products has updated our Data Logging Software to now export all data logs into a CSV (Excel) file to save and compare runs, view, graph and improve tuning. To view CSV data log files, you must use MyStyle software or export it from MyStyle software. These new releases make the Insight CS2 and CTS2 the industry leader in digital gauge/data logging for any enthusiast! Features: For Edge CS2 and CTS2 Multiple Sensors For Data Logging Kit Includes: EAS Starter Kit (2) EAS EGT Probes (2) EAS Universal 5 Volt (2) EAS 0-100 Psig Pressure Sensor (2) EAS -40 To 300F Temperature Sensor
TAKE 10% OFF SITEWIDE* WITH OUR MEMORIAL DAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: MEMORIAL10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 5/28/19 only.