Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
AFE 46-20034-B BladeRunner Hot & Cold Intercooler Tube Combo Kit 28717 12.00 AFE 46-20034-B BladeRunner Hot & Cold Intercooler Tube Combo Kit
$ 349.6
The AFE 46-20034-B BladeRunner Hot and Cold Intercooler Tube Combo Kit increases flow and performance in your 2007.5-2009 Dodge 6.7L Cummins. This Combo Kit outflows the stock intercooler tubes by 17% to provide maximum flow. Perfect Fit: Utilizes the factory mounting locations for a hassle-free installation. Includes high quality stainless steel T-bolt clamps and heavy-duty 5-Ply polyester reinforced couplings for strength and durability. The tubes also come equipped with billet aluminum 1/8" NPT ports, are provided for connecting pressure sensors or water methanol injection and work with OEM or aFe's upgraded intercooler (46-20032). Flow and Performance: aFe Power's intercooler tubes are constructed from 3" (hot side) and 3-1/2" (cold side) mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. The smooth transition bends decrease turbulence, minimize pressure loss, while increasing horsepower and torque. aFe Badging: A unique laser-cut aFe Power logo plate is welded-on for an aggressive style. Features: Outflows Stock IC Tube By 17% Fits Both AFE and Stock Intercooler 3" Hot Side Mandrel Bent Construction Built-In 1/8" NPT Ports On Cold-Side Tube 3-1/2" Cold-Side Mandrel Bent Construction
AFE 46-20038-B BladeRunner 3" Hot Side Intercooler Tube 28719 7.00 AFE 46-20038-B BladeRunner 3" Hot Side Intercooler Tube
$ 190
The AFE 46-20038-B BladeRunner 3" Hot Side Intercooler Tube for your 2007.5-2009 Dodge 6.7L Cummins increases flow and performance. Built from 3" mandrel-bent aluminum tubing, this Hot Side Intercooler Tube outflows the factory by 21%. Flow and Performance: Constructed of 3"mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion The smooth transition bends decrease turbulence and minimize pressure loss, while increasing horsepower and torque. Installs on the Hot-Side to transfer heated air smoothly to the intercooler to accelerate heat transfer for better performance. Perfect Fit: Utilizes the factory mounting locations for a hassle-free installation. Includes high quality stainless steel T-bolt clamps and heavy-duty 5-Ply polyester reinforced couplings for strength. Fits OEM or aFe's upgraded intercooler (46-20032). aFe Badging: A unique laser-cut aFe power logo plate is welded-on for an aggressive style. Features: Outflows Factory Tube By 21% 3" Madndrel-Bent Aluminum Tubing Fits Both AFE or OEM Intercooler
AFE 46-20039 BladeRunner Cold Side Intercooler Tube 4058 5.00 AFE 46-20039 BladeRunner Cold Side Intercooler Tube
$ 190
The AFE 46-20039 BladeRunner Cold Side Intercooler Tube increases flow and performance on your 2007.5-2009 Dodge 6.7L Cummins. This Intercooler Tube upgrade is a direct replacement for the restrictive factory tube and offers a smooth high-flow design due to its 3-1/2" mandrel bent construction. Features: Increased Flow Direct Replacement Lower Temperatures CARB EO# D-550-8 Cold Side Intercooler Tube
AFE 46-20084-B BladeRunner Hot & Cold Intercooler Tube Combo Kit 27923 16.00 AFE 46-20084-B BladeRunner Hot & Cold Intercooler Tube Combo Kit
$ 349.6
The AFE 46-20084-B BladeRunner Hot and Cold Intercooler Tube Combo Kit increases flow and performance in your 2010-2012 Dodge Ram 6.7L Cummins. This upgrade includes both the AFE BladeRunner Cold Side 3-1/2" and Hot Side 2-3/4" Intercooler Tubes. Perfect Fit: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes constant tension, spring loaded, T-bolt clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone couplings for strength. Flow and Performance: Constructed of 2-3/4" Hot-Side and 3-1/2" Cold-Side mandrel-bent aluminum tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The Smooth bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. aFe Badging: Unique aluminum laser-cut aFe Power logo plate is welded-on for an aggressive style. Features: Fits Factory OE Intercooler Outflows Factory Intercooler Tubes 2-3/4" Hot-Side Mandrel-Bent Aluminum Tube 3-1/2" Cold-Side Mandrel-Bent Aluminum Tube Durable, Wrinkle-Black Powdercoated Finish For Heat Resistance Includes Premium T-Bolt Clamps and Silicone Couplings For Long Life Note: This system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicle.
AFE 46-20088-B BladeRunner Hot Side Intercooler Tube 27924 8.00 AFE 46-20088-B BladeRunner Hot Side Intercooler Tube
$ 190
The AFE 46-20088-B BladeRunner Hot Side Intercooler Tube increases flow and performance in your 2010-2012 Dodge 6.7L Cummins. Designed from 2-3/4" mandrel-bent aluminum tubing, this intercooler tube outflows the factory tube and is a direct replacement that works with your OE Intercooler. Perfect Fit: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes constant tension, spring loaded, T-bolt clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone couplings for strength. Fits OEM intercooler. Flow and Performance: Constructed of 2-3/4" Hot-Side mandrel-bent aluminum tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The Smooth bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. aFe Badging: Unique aluminum laser-cut aFe Power logo plate is welded-on for an aggressive style. Features: Outflows Factory Tube By 2% 2-3/4" Hot-Side Mandrel-Bent Aluminum Tube Powdercoated Wrinkle Black For Heat Resistance Includes Premium Clamps and Silicone Couplings Works With OE Intercooler Note: This system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicle.
AFE 46-20089 BladeRunner Cold Side Intercooler Tube 5256 6.00 AFE 46-20089 BladeRunner Cold Side Intercooler Tube
$ 190
The AFE 46-20089 BladeRunner Cold Side Intercooler Tube increases flow and performance in your 2010-2012 Dodge Ram 6.7L Cummins. Built from 3-1/2" mandrel-bent aluminum, this intercooler tube Upgrade outflows the factory tube by up to 25%. Perfect Fit Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes constant tension, spring loaded, T-bolt clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone couplings for strength. Flow and Performance Constructed of 3-1/2" Cold-Side mandrel-bent aluminum tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The Smooth bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. aFe Badging: Unique aluminum laser-cut aFe Power logo plate is welded-on for an aggressive style. Features: Works With OE Intercooler Outflows Factory Tube By 25% 3-1/2" Mandrel-Bent Aluminum Construction Durable, Powdercoated Wrinkle-Black Finish Includes Premium T-Bolt Clamps and Silicone Couplings Utilizes All Factory Mounting Locations For Easy Install Note: This intercooler tube is 50-state legal for 2010 models only (CARB E.O Number D-550-8).
AFE 46-20134 BladeRunner Intercooler Tube Combo Kit 23611 13.00 AFE 46-20134 BladeRunner Intercooler Tube Combo Kit
$ 399
The AFE 46-20134 BladeRunner Intercooler Tube Combo Kit for your 2013-2018 Dodge 6.7L Cummins features upgraded tubes for both the hot and cold side of side of your intercooler. Flow and Performance: The intercooler tubes are constructed of 3"" mandrel bent stainless steel tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The Smooth bends allow for low turbulence, increasing horsepower, torque and lowering EGTs.Installation is a snap:Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes constant tension, Spring loaded, t-bolt clamps for a leak-free seal and heavy-duty 5-PLY couplings for strength. Fits OEM or aFe's upgraded intercooleraFe Badging:Unique stainless steel laser-cut aFe Power logo plate is welded-on for an aggressive style.Features3" mandrel-bent powder-coated stainless tube for heat resistance and long-lifeIncludes high-temp couplings and stainless steel t-bolt clamps Couplings constructed out of heavy-duty high-temp 5-PLY polyester for heat-resistance and durabilityConstant tension T-bolt clamps for a tight and secure installation.Uses all factory mounting locations and includes all necessary hardware for a hassle-free installation.Color Options: Black - 46-20134-BRed - 46-20134-R
AFE 46-20138 BladeRunner Hot Side Intercooler Tube 23617 8.00 AFE 46-20138 BladeRunner Hot Side Intercooler Tube
$ 190
The AFE 46-20138 BladeRunner Hot Side Intercooler Tube for your 2013-2018 Dodge 6.7L Cummins is built from 3" mandrel bent stainless steel for maximum flow and powder-coated for heat and corrosion resistance. The smooth bends allow for low turbulence, increasing horsepower, torque and lowering EGT's .Installation is a snap: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes constant tension, Spring loaded, t-bolt clamps for a leak-free seal and heavy-duty 5-PLY couplings for strength. Fits OEM intercooler.aFe Badging:Unique stainless steel laser-cut aFe Power logo plate is welded-on for an aggressive style.Features:Lower EGTs3" mandrel bent stainless steel tubingCouplings pressure tested to withstand up to 200 PsiIncludes high quality t-bolt clamps and heavy-duty 5-ply couplingsUnique stainless steel laser-cut aFe Power logo plate is welded-on for an aggressive styleBolt-on Kit fits OEM intercooler, uses all factory mounting locations and includes all necessary hardware for a hassle-free installation.Color Options:Black - 46-20138-BRed - 46-20138-R
AFE 46-20139-B BladeRunner Cold Side Intercooler Tube 23614 7.58 AFE 46-20139-B BladeRunner Cold Side Intercooler Tube
$ 229.9
The AFE 46-20139-B BladeRunner Cold Side Intercooler Tube for your 2013-2016 Dodge 6.7L Cummins is built from 3" mandrel bent stainless steel for maximum flow and powder-coated for heat and corrosion resistance. The smooth bends allow for low turbulence, increasing horsepower, torque and lowering EGT's . Installation is a snap: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes constant tension, Spring loaded, t-bolt clamps for a leak-free seal and heavy-duty 5-PLY couplings for strength. Fits OEM intercooler. aFe Badging: Unique stainless steel laser-cut aFe Power logo plate is welded-on for an aggressive style. Features: Lower EGTs3" mandrel bent stainless steel tubingCouplings pressure tested to withstand up to 200 Psi Includes high quality t-bolt clamps and heavy-duty 5-ply couplings Unique stainless steel laser-cut aFe Power logo plate is welded-on for an aggressive styleBolt-on Kit fits OEM intercooler, uses all factory mounting locations and includes all necessary hardware for a hassle-free installation.
Banks Power 25964 Cold Side Boost Tube 35838 7.00 Banks Power 25964 Cold Side Boost Tube
$ 208.9
Replace the plastic OEM boost tubes in your 2010-2012 Ram 6.7L Cummins with the Banks Power 25964 Cold Side Boost Tube. The Boost Tube Upgrade Kit features 3-1/2" constant diameter mandrel bent Aluminized Steel that provides 37% greater airflow than stock tubes and results in greater horsepower. The Boost Tube Upgrade Kit is covered in a sleek red powdercoat finish that stops at the end so the specially engineered silicone couplers maintain a tighter grip during high boost conditions. Features:Natural Finish3 ½” Boost TubesIncreased HorsepowerSpecially Engineered Silicone CouplersImprove The Flow Area Up To 37% Over Stock
Banks Power 25965 Boost Tube Upgrade Kit 35830 14.00 Banks Power 25965 Boost Tube Upgrade Kit
$ 366.67
Constructed from mandrel bent, 3 ½” diameter tubing, the Banks Power 25965 Boost Tube Upgrade Kit provides over 65% more flow compared to the OEM boost tubes in your 2010-2012 Ram 6.7L Cummins. Specially designed for unrestrictive airflow, the Boost Tube Upgrade Kit greatly increases airflow to the engine which results in greater horsepower. With a plain, natural finish, the boost tube upgrade kit is perfect for the Cummins owner that wants improved performance, without the flashy powdercoats of other products.Features:Natural Finish3 ½” Boost TubesIncreased HorsepowerSpecially Engineered Silicone CouplersImprove The Flow Area Up To 65% Over Stock
Banks Power 25990 Boost Tube System 35506 13.00 Banks Power 25990 Boost Tube System
$ 309
Experience lower EGT's and faster turbo spooling from your 2007.5-2009 Dodge Ram 6.7L Cummins with the Banks Power 25990 Boost Tube System. Included with these tubes are 4 and 5-ply heavy-duty silicone couplers combined with spring-loaded constant tension clamps for a tight, reliable hold under high boost conditions. Banks hot and cold side tubes are constructed from a high-quality mandrel bent 3.5" aluminized steel tube for a smooth constant diameter and have up to 40% greater flow area versus the stock tubes. These higher flowing tubes retain more boost pressure between the turbo, intercooler, and intake which results in maximum horsepower. Combine the Banks Boost Tubes with the Banks 3.5 or 4" Monster Ram for the most power gains!Features:Quicker Turbo SpoolHot and Cold Side TubesGray Powder Coat FinishMandrel Bent 3.5" Tube DiameterIncreases Performance and Lowers EGT'sIncludes Heavy-Duty Silicone Couplers and ClampsNote: This kit is designed to work with the stock intercooler or aftermarket intercoolers with stock inlet and outlet sizes.
Banks Power 25991 Cold Side Boost Tube Upgrade Kit 35508 6.00 Banks Power 25991 Cold Side Boost Tube Upgrade Kit
$ 189
Enhance airflow even further on your Banks Power 3.5" or 4" Monster Ram equipped 2007.5-2009 Dodge Ram 6.7L Cummins with the Banks Power 25991 Cold Side Boost Tube Upgrade Kit. This driver side Boost Tube features 40 percent greater flow area than the stock tube, increasing performance by allowing for a quicker spooling turbo while reducing EGT's. Constructed of mandrel bent 3.5" aluminized steel, this tube dwarfs the factory 2.7" tube and installs perfectly in its place. Included with the Boost Tube are heavy-duty silicone couplers and spring-loaded constant tension clamps that can withstand high temperatures and hold tight under high-boost conditions. Bank's applies a red powder coat finish that stops before the end of the tube for better coupler grip.Features:Reduced EGT'sQuicker Turbo SpoolMandrel Bent 3.5" TubeDriver Side ReplacementRed Powder Coat FinishIncludes Couplers and ClampsNote: This kit is designed to work with trucks already equipped with the Banks Power 3.5" or 4" Monster Ram intake. Fits stock intercooler or aftermarket intercooler with stock inlet and outlet size and location.
Banks Power 25997 Cold Side Boost Tube 35837 7.00 Banks Power 25997 Cold Side Boost Tube
$ 220
Provide your 2010-2012 Ram 6.7L Cummins with 37% more flow area than the stock boost tube with the Banks Power 25997 Cold Side Boost Tube. The Boost Tube Upgrade Kit features tubes that are e 3-1/2" constant diameter mandrel bent Aluminized Steel with larger radius bends for unrestricted airflow. By adding larger tubes with an unrestrictive design, the Boost Tube allows more air to reach the engine and creates more horsepower. Features:Natural Finish3 ½” Boost TubesIncreased HorsepowerSpecially Engineered Silicone CouplersImprove The Flow Area Up To 37% Over Stock
Banks Power 25998 Boost Tube Upgrade Kit 35829 7.00 Banks Power 25998 Boost Tube Upgrade Kit
$ 388.89
Improve the flow area up to 65% over the stock boost tubes in your 2010-2012 Ram 6.7L Cummins with the Banks Power 25998 Boost Tube Upgrade Kit. Every Boost Tube is 3 ½” and is mandrel bent, the specially engineered design promotes unrestricted airflow which results in greater horsepower. The Boost Tubes are coated in a red powdercoat that stops at each end of the tubes so that Banks specially constructed silicone couplers hold tight when under high boost conditions. Features:3 ½” Boost TubesSleek Red PowdercoatIncreased HorsepowerSpecially Engineered Silicone CouplersImprove The Flow Area Up To 65% Over Stock
Banks Power Boost Tube System 35735 8.00 Banks Power Boost Tube System
$ 379
Get quicker spooling turbo performance from your 2013-2018 Dodge Ram 6.7L Cummins with the Banks Power Boost Tube System. Banks hot and cold side tubes are constructed from a high-quality mandrel bent 3.5" aluminized steel tube for a smooth constant diameter and have up to 103% greater flow area versus the stock tubes. These higher flowing tubes retain more boost pressure between the turbo, intercooler, and intake which results in maximum horsepower. The included 4 and 5-ply heavy-duty silicone couplers combined with spring-loaded constant tension clamps for a tight, reliable hold under high boost conditions. Available in a red powder coat or raw finish. Combine the Banks Boost Tubes with the Banks 3.5 or 4" Monster Ram for the most power gains! Features:Quicker Turbo SpoolHot and Cold Side TubesRed Powder Coat or Raw FinishMandrel Bent 3.5" Tube DiameterIncreases Performance and Lowers EGT'sIncludes Heavy-Duty Silicone Couplers and ClampsNote: This kit is designed to work with the stock intercooler or aftermarket intercoolers with stock inlet and outlet sizes.
Banks Power Cold Side Boost Tube Upgrade Kit 35737 6.00 Banks Power Cold Side Boost Tube Upgrade Kit
$ 199
The Banks Power Cold Side Boost Tube Upgrade Kit improves airflow and allows the turbocharger to spool up faster on your Banks Power 3.5" or 4" Monster Ram equipped 2013-2018 Dodge Ram 6.7L Cummins. Constructed of mandrel bent 3.5" aluminized steel, this tube dwarfs the factory 2.7" tube and installs perfectly in its place. This driver side Boost Tube features 70 percent greater flow area than the stock tube, increasing performance by allowing for a quicker spooling turbo while reducing EGT's. Bank's offers the tube in a raw finish or a red powder coat finish that stops before the end of the tube for better coupler grip. Included with the Boost Tube are heavy-duty silicone couplers and spring-loaded constant tension clamps that can withstand high temperatures and hold tight under high-boost conditions.Features:Reduced EGT'sQuicker Turbo SpoolMandrel Bent 3.5" TubeDriver Side ReplacementIncludes Couplers and ClampsAvailable in Raw or a Red Powder Coat FinishNote: Fits stock intercooler or aftermarket intercooler with stock inlet and outlet size and location.This kit is designed to work with trucks already equipped with the Banks Power 3.5" or 4" Monster Ram intake.
BD-Power Intercooler Intake Replacement Pipe 1042595 4586 5.00 BD-Power Intercooler Intake Replacement Pipe 1042595
$ 180
Intercooler Intake Replacement Pipe Replaces the weak factory plastic intercooler intake pipe on the Dodge 6.7L. Eliminates potential cracking from improved boost pressures that comes with turbo and electronic modifications. Available in a powder coated polished appearance.
MBRP Aluminum Intercooler Pipe 3.5" Passenger Side IC1265 6211 5.00 MBRP Aluminum Intercooler Pipe 3.5" Passenger Side IC1265
$ 179.99
Polished aluminum for great looks and durability 3.5 diameter tubing provides up to 70% increase in air flow over stock intercooler pipes Increase performance, faster turbo spool, and lower EGTs all while potentially increasing fuel mileage and driveability Prevent leaks and blown boots with supplied heavy duty couplings and spring loaded constant-tension clamps Works with both stock and aftermarket intercooler systems with factory style inlets
MBRP IC2200 3" Driver Side Intercooler Pipe 20786 5.00 MBRP IC2200 3" Driver Side Intercooler Pipe
$ 215.99
The MBRP IC2200 3" Driver Side Intercooler Pipe for your 2013-2018 Dodge 6.7L Cummins will give your truck a performance rush with this show quality polished aluminum intercooler pipe. The 3" mandrel bent design provides your truck a 144 CFM increase over stock. This results in faster spool-up and lower EGT's A must have upgrade for trucks with performance modifications. Features: 25% Flow Increase Increased Performance 4-Ply Heavy-Duty Couplings 3" Polished Aluminum Construction
TAKE 10% OFF SITEWIDE* WITH OUR MEMORIAL DAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: MEMORIAL10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 5/28/19 only.