The ACDelco TP3018 Fuel Filter for your 2001-2016 GM 6.6L Duramax is a factory replacement filter designed to protect your fuel system. Includes new O-rings.
ACDelco # TP3018
AFE 44-FF011 Pro-Guard D2 Fuel Filter18532.00
The AFE 44-FF011 Pro-Guard D2 Fuel Filter for your 01-16 GM 6.6L Duramax delivers increased flow and efficiency that are demanded in a Diesel environment. High performance and high flow all in one quality engineered filter. This fuel filter meets or exceeds new GM specifications. This fuel filter is equivalent to GM P/N 12633243, AC Delco P/N TP3012 and Racor P/N PFF50216.
Max Flow Rate: 50 GPH
Max Working Pressure: 30 PSI
Water Removal Efficiency: 99%
Center Threads: 3/8"-8
Operates Between: -50ºF and +225ºF
Donaldson P551313 Fuel Filter807691.00
The Donaldson P551313 Fuel Filter for your XDP CAT Filter Adapter Kits is one of the most advanced filters on the market and is able to filter down to 3 microns. This filter features SAE J1858 certified filter media to ensure it will grab and trap any particulates in your fuel. With an O-ring mounting surface for a leak-free seal, this filter will protect your fuel system to make sure contaminated fuel damage vital fuel injection components. If your GM Duramax, 5.9L or 6.7L Cummins has an XDP CAT Filter Adapter, this filter is a great alternative to the 1R0-750. Features: Captures Damaging Debris O-Ring Minimizes Potential Leaks Efficiency Filtration 3-Micon Rating Replacement Filter For XDP CAT Filter Adapter Specifications:Thread Size - 1-14 UNLength - 6.97"Gasket OD - 2.83"Gasket ID - 2.44"Type - SecondaryStyle - Spin-OnEfficiency 99% - 3 MicronEfficiency Test Std - SAE J1858Dorman 904-110 Water In Fuel (WIF) Sensor291871.00
The Dorman 904-110 Water In Fuel (WIF) Sensor is an affordable replacement option for your 2001-2011 GM 6.6L Duramax. Dormans Water In Fuel Sensor is constructed from high-quality materials to withstand wear and tear due to repeated fuel filter service and other factors. It activates a warning signal that indicates elevated water levels in diesel fuel, enabling you to take measures to protect against fuel contamination, fuel system rust and corrosion, and engine trouble.
Avoid Extensive Damage To Fuel System
Direct Replacement For Factory WIF Sensor
Cross Reference Numbers:
GM OE Part#: 12639277
Alliant Part#: RK42043 Note: The Dorman WIF Sensor has a different hex pattern and requires the Dorman WIF Wrench for removal and installation. FASS PF-3001 Fuel Particulate Filter356292.00
The FASS PF-3001 Fuel Particulate Filter directly replaces the fuel filter on your FASS Titanium Series or Titanium Signature Series Fuel Systems. Featuring 144 Micron filtration, it's placement now on the suction side drastically reduces cavitation while increasing flow properties, removing larger fuel particulates, and creating an overall quieter sound output from the pump. Features:Replaces FF-3003 FiltersSuggested Change Interval - 30,000 MilesFor Titanium Series and Titanium Signature SeriesNote: This filter must be used with the XWS-3002 Extreme Water Separator due to the fact that the PF-3001 is now on the suction side and the XWS-3002 is on the pressure side. Please see the location diagram on the filters for proper filter placement.FASS PF-3001 XL Extended Length Fuel Particulate Filter503062.00
The FASS PF-3001 XL Extended Length Fuel Particulate Filter features a larger filter media to increase time between service intervals on your FASS Titanium or Titanium Signature Series Fuel Systems equipped truck. This filter is still rated at 144 microns and mounts to the suction side to drastically reduce cavitation, increase flow properties, and lower the sound output of the FASS System.Features:144 MicronReplaces FF-3003 FilterExtended Service IntervalsAlternative To The Standard PF-3001For Titanium Series and Titanium Signature SeriesNote: This filter must be used with the XWS-3002 XL Extended Length Extreme Water Separator due to the fact that the PF-3001 is now on the suction side and the XWS-3002 is on the pressure side. Please see the diagram located on the filter's body for proper filter placement.FASS XWS-3002 Extreme Water Separator356302.00
The FASS XWS-3002 Extreme Water Separator replaces the water separator on your FASS Titanium Series or Titanium Signature Series Fuel Systems. Rated at 2 microns absolute, this redesigned water separator no longer has a drain due to the fact that the filter element itself now traps any water in your fuel. Features:Replaces FS-1001Suggested Change Interval - 30,000 MilesFor Titanium Series and Titanium Signature SeriesNote: This filter must be used with the FASS PF-3001 Fuel Particulate Filter due to the fact that the XWS-3002 is now on the pressure side and the PF-3001 is on the suction side. Please see the location diagram on the filters for proper filter placement. FASS XWS-3002 XL Extended Length Extreme Water Separator503052.00
Upgrade the water separator filter on your pickup's FASS Titanium or Titanium Signature Series Fuel System with the FASS XWS-3002 XL Extended Length Extreme Water Separator. This 2 micron filter still offers the same 99.96% water removal effectiveness as the standard filter but offer an extended service interval because of its larger filter media size.Features:2 MicronReplaces FS-1001Extended Service Life99.96% Water RemovalAlternative To The Standard XWS-3002For Titanium Series and Titanium Signature SeriesNote: This filter must be used with the FASS PF-3001 XL Extended Length Fuel Particulate Filter due to the fact that the XWS-3002 XL is now on the pressure side and the PF-3001 XL is on the suction side Please see the location diagram printed on the filter's body for proper filter placement.FRAM PS9059B Fuel Filter43892.00
The FRAM PS9059B Fuel Filter for your 2001-2016 GM 6.6L Duramax is a direct replacement of the factory fuel filter in your truck. Designed to meet or exceed OE specs, FRAM filters offer an ideal balance of dirt-trapping efficiency and dirt-trapping capacity. Using a special blend of components, FRAM has created a proprietary filter media that delivers excellent fuel system protection.
CS10726 Product Specifications:
Product Type: Fuel/Water Separator Spin-on
Product Height: 6.39"
Product I.D: 36mmx1.5mm Th'd (Bottom) 3 3/8-8 Th'd (Top)
Product O.D: 4.02"
Competitor Cross Reference
AC-DELCO - TP1298, TP1298A, TP1298B, TP3012
AMSOIL - P550743
BALDWIN - BF7727, BF7827
CARQUEST - 86810, 86960XE
CHAMP - LFF6012, LFF8736, LFF8736B
DEUTSCH - FF798, FF817
DONALDSON - P550517, P550743, P550833
FLEETGUARD - FF5501, FS20002
G K INDUSTRIES - TP1300
GENERAL MOTORS - 12633243, 89016324, 97256734, 97385488, 98017645, 98081884
GROUP 7 - F55464
HASTINGS - BF7827, FF1120, FF1220, FF1230
ISUZU - 8-97256-734-0, 8-97385-488-, 08-98017-645-0
LUBER-FINER, LFF8736, LFF6012
NAPA - 3910, 3960, 3960XE
PARTS MASTER - 73810
PARTS PLUS - LFF8736
PUROLATOR - F55464
QUAKER STATE - F55464
RACOR - INF4598, PFF50216, PFF5544, R50, R55
SHELL - F55464
WARNER - LFF8736
WIX - 33810, 33910, 33960, 33960XEGM 12639277 Water In Filter (WIF) Sensor93641.00
The GM 12639277 Water In Filter Sensor for your 2001-2011 GM 6.6L Duramax is a genuine OEM replacement Water In Filter (WIF) Sensor. The WIF sensor threads into your factory fuel filter. Over time these sensors can strip, break or become damaged allowing air leaks which will cause hard starts and poor performance. To prevent damage to sensor during routine maintenance the use of a WIF Wrench is highly recommended.
Detects Water In Fuel
K&N PF-3000 Fuel Filter253852.00
The KandN PF-3000 Fuel Filter for your 2001-2015 GM 6.6L Duramax is a performance fuel filter built for both high flow rates and capacity while providing outstanding filtration. Featuring a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements. The high performance cellulose glass media traps contaminants such as rust, dirt, scale and other foreign materials.
Lisle 34350 Water Sensor Wrench314431.00
Having the right tools makes all the difference when doing maintenance on your 2001-2011 GM 6.6L Duramax, that's why the Lisle 34350 Water Sensor Wrench is a must-have in the tool box of any Duramax owner. The factory Water Sensor or Water In Fuel (WIF) Sensor is built from plastic and has a unique 12-sided design that is easily damaged by ill-fitting tools like pliers, adjustable wrenches, and channel locks. The 34350 Water Sensor Wrench is designed to directly fit the Water Sensor on your truck eliminating damage and making filter changes a breeze. Features: Fits 12-Sided WIF Sensor Eases Fuel Filter Changes Eliminates Unnecessary Damage To WIF SensorPPE Diesel WIF (Water in Filter) Wrench 51308000048402.00
PPEs Water Level Sensor Wrench does two important jobs and is the perfect fit for both! The big end is used to remove the Water In Fuel (WIF) filter sensor with ease while the small end of the wrench was literally made to fit the billet PPE Air Bleeder Screw.
With time and exposure, plastic WIFs becomes brittle, and though it is hard to see, they also have a minute taper to them. PPEs Water Level Sensor Wrench matches that taper perfectly allowing the sensor to be safely removed when it is time to replace the filter. It is by definition a two in one tool, and since it is made from polished Stainless Steel it will look great in your tool box too!
Fits and Safely Removes Factory Water In Filter Sensor
Polished Stainless Steel
Small End Fits Billet PPE Air Bleeder Screw
Racor PFF50216 ParFit Fuel Filter291102.00
The Racor PFF50216 ParFit Fuel Filter is a direct replacement for your 2001-2016 GM 6.6L Duramax. ParFit fuel filters protect expensive fuel system components from microscopic solid contaminates and damaging water. ParFit filters are engineered and manufactured to meet stringent quality requirements and OEM (Original Equipment Manufacturer) specifications for correct fit, long service life, and performance. The coalescing filter system inside has up to twice the life and improved water removal in all blends and types of diesel fuel when compared to other paper media filters.
Racor is the OEM supplier of this filter to General Motors. This filter doesn't just meet OEM standards, it is the OEM standard.
Features: OE Replacement 4 Micron Rating (Factory Spec.)
Cross Reference#: TP3018, PS9059B
Racor PFRK50126-04 ParFit Water In Fuel (WIF) Sensor291111.00
The Racor PFRK50126-04 ParFit Water In Fuel (WIF) Sensor for your 2001-2011 GM 6.6L Duramax is designed to alert you when water is in your fuel filter. Over time, the factory installed sensor can strip, break or become damaged causing air leaks in your fuel system. Air leaks can lead to hard starting conditions and poor engine performance. To prevent damage, the XDP WIF Wrench is highly recommended.
Racor is the OEM supplier of this WIF Sensor to General Motors. This product doesn't just meet OEM standards, it is the OEM standard.
Float Style WIF Sensor (2001-2011)
Cross Reference#: GM 12639277
XDP Duramax WIF (Water in Filter) Wrench XD12893271.00
The XDP WIF wrench XD128 is a must have for any GM Duramax owner, it makes removing and replacing your factory water in fuel sensor a breeze. The XDP WIF Wrench is specifically designed for the 12 sided plastic water sensor that is easily damaged by tools, like pliers, that do not specifically fit the sensor. As an added bonus the opposite side of the wrench is slotted to remove the plastic air bleeder screw with ease, preventing possibly rounding off the screw head.FEATURES:Precision machined 12 sided wrench perfectly fits stock water in fuel sensorHigh Quality T-6061 AluminumBlack Anodized Finish with engraved XDP logoBleeder screw driver on the opposite endMADE IN THE USA!Warranty Info:Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit. Click Here for full warranty policy.
XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:
UPDATE: Effective 6/1 Customer Service resumes normal business hours of M-F 8:30 â€“ 9:00pm EST.
Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.