Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Oil System Components

New Product Filters!
AFE 46-70330 Street Series Deep Engine Oil Pan 35484 13.00 AFE 46-70330 Street Series Deep Engine Oil Pan
$ 370.5
Get a more complete oil change and increase the oil capacity in your 2001-2010 GM 2500HD/3500HD 6.6L Duramax with the AFE 46-70330 Street Series Deep Engine Oil Pan. Constructed from a durable cast aluminum, this deep pan holds approximately 2 quarts over the factory pan and incorporates a magnetic drain plug to capture loose particles for maximum engine protection. The built-in external and internal fins provide efficient cooling by transferring heat from the engine oil to the outside air. Due to a high mounted drain plug, the factory Duramax oil pans can leave over a 1/2 quart of residual oil during every oil change. AFE addresses this issue with their specialized design which lowers the drain plug location and increases oil capacity for better performance over a longer duration. AFE includes all necessary hardware as well as a Pro Guard D2 engine oil filter for a complete and hassle-free installation. Features:Raw FinishCast Aluminum ConstructionIncludes Installation Hardware2 Quart Increased Oil CapacityInternal and External Cooling FinsIncludes Pro Guard D2 Engine Oil FilterApplication Note: Fitment of this pan requires a minimum of a 6" lift.
AFE 46-70332 Pro Series Deep Engine Oil Pan 35485 13.00 AFE 46-70332 Pro Series Deep Engine Oil Pan
$ 417.99
The AFE 46-70332 Pro Series Deep Engine Oil Pan gives you a more complete oil change and increases the oil capacity in your 2001-2010 GM 2500HD/3500HD 6.6L Duramax. The built-in external and internal fins provide efficient cooling by transferring heat from the engine oil to the outside air. Constructed from a durable cast aluminum, this deep pan holds approximately 2 quarts over the factory pan and incorporates a magnetic drain plug to capture loose particles for maximum engine protection.Due to a high mounted drain plug, the factory Duramax oil pans can leave over a 1/2 quart of residual oil during every oil change. AFE addresses this issue with their specialized design which lowers the drain plug location and increases oil capacity for better performance over a longer duration. AFE includes all necessary hardware as well as a Pro Guard D2 engine oil filter for a complete and hassle-free installation. Features:Wrinkle Black FinishCast Aluminum ConstructionIncludes Installation Hardware2 Quart Increased Oil CapacityInternal and External Cooling FinsIncludes Pro Guard D2 Engine Oil FilterApplication Note: Fitment of this pan requires a minimum of a 6" lift.
AFE 79-12002 Billet Oil Cap 20208 2.00 AFE 79-12002 Billet Oil Cap
$ 78.85
The AFE 79-12002 Billet Oil Cap will help give your 2001-2015 GM 6.6L Duramax a custom look under the hood. The aFe oil cap gives styling a whole new aspect. Constructed out of durable CNC T-6061 billet aluminum for maximum strength and durability, this oil cap features eye-catching black chrome screws and a flawless matte black finish. Equipped with a new o-ring style gasket, this cap ensures a leak-free seal while enhancing the look of your engine compartment. Features: Built From T-6061 Aluminum Matte Black Finish O-Ring Style Gasket
Banana Pan Deep Dish Replacement Oil Pan 24749 15.00 Banana Pan Deep Dish Replacement Oil Pan
$ 349
The Banana Pan Deep Dish Replacement Oil Pan for your 2001-2015 GM 6.6L Duramax solves the issues with the factory supplied oil pan on your Duramax engine. The Stock lower Oil Pan is a compromised design and it has a Hump" made by the transverse frame member that traps over two cups (two-thirds of a QUART!) of un-drainable, used, contaminated oil that can't be drained during an oil change. The Banana Pan eliminates the "Hump" and facilitates complete sump draining. With a great engine like the Duramax you'll want a great Oil Pan like the Banana Pan, for cleaner oil and a cleaner engine. Made from durable 356-T6 Aluminum this pan is a direct fit that will bolt in place of your factory lower pan with no special tools, grinding or cutting required. The Banana Pan features a durable yellow powdercoated finish for protection and great looks. Just like the original Banana Pan, you'll be able to drain all the oil in your engine. The Deep Dish Pan also increases your oil capacity. Features: Built From Durable 356-T6 Aluminum Direct Replacement For Factory Lower Pan Note: The extended Deep Dish pan measures 6.75" tall and is only for use on trucks that are lifted with a suspension lift that provides additional space between the cross-member and lower oil pan.
Banana Pan Replacement Oil Pan 24748 15.00 Banana Pan Replacement Oil Pan
$ 329
The Banana Pan Replacement Oil Pan for your 2001-2015 GM 6.6L Duramax solves the issues with the factory supplied oil pan on your Duramax engine. The Stock lower Oil Pan is a compromised design and it has a Hump" made by the transverse frame member that traps over two cups (two-thirds of a QUART!) of un-drainable, used, contaminated oil that can't be drained during an oil change. The Banana Pan eliminates the Hump and facilitates complete sump draining. With a great engine like the Duramax you'll want a great Oil Pan like the Banana Pan, for cleaner oil and a cleaner engine. Made from durable 356-T6 Aluminum this pan is a direct fit that will bolt in place of your factory lower pan with no special tools, grinding or cutting required. The Banana Pan features a durable yellow powdercoated finish for protection and great looks. The 2+ Cups of dirty, contaminated oil that were trapped in the sump will be gone and you will only loose about one cup of volume. If you install a remote oil filter you will regain that capacity and then some. The space around the Duramaxs lower oil pan is very restricted and there is no space to expand the lower oil pan to gain volume. Features: Built From Durable 356-T6 Aluminum Direct Replacement For Factory Lower Pan
Dorman 918-400 Engine Oil Cooler 34603 4.31 Dorman 918-400 Engine Oil Cooler
$ 190.95
Replace the failing oil cooler in your 2001-2016 GM 6.6L Duramax with the Dorman 918-400 Engine Oil Cooler. When your oil cooler is not functioning properly, it can cause oil leaks, and higher than normal operating temperatures. Dorman's Engine Oil Cooler is a direct replacement for your truck and features a durable aluminum construction for a long service life. Features: Engine Oil Cooler Direct ReplacementDurable, Corrosion Resistant DesignGM Cross Reference #: 12649227, 19210615
Fleece FPE-DTFL-S3S4 Remote Turbocharger Oil Feed Line Kit 25897 1.00 Fleece FPE-DTFL-S3S4 Remote Turbocharger Oil Feed Line Kit
$ 99.99
The Fleece FPE-DTFL-S3S4 Remote Turbocharger Oil Feed Line Kit for your 2004.5-2010 GM 6.6L Duramax provides more oil to your turbocharger which is especially important in high performance applications. The current oil feed for your turbocharger is supplied off of the #4 cam journal bearing, which can lead to pre-mature bearing wear or failure. Feeding your turbocharger from the oil rifle on the block, ensures adequate supply and prevents failures.Features: Increased Oil Supply NPT Fittings For S300/S400 Style TurbosKit Contents: High Quality AN fittings, Extra Flexible Smooth Bore Teflon Hose, Stock Oil Feed Plug, Oil Galley Rifle Fitting
Fleece FPE-DTFL-VNT Remote Turbocharger Oil Feed Line Kit 25896 1.00 Fleece FPE-DTFL-VNT Remote Turbocharger Oil Feed Line Kit
$ 99.99
The Fleece FPE-DTFL-VNT Remote Turbocharger Oil Feed Line Kit for your 2004.5-2010 GM 6.6L Duramax provides more oil to your turbocharger which is especially important in high performance applications. The current oil feed for your turbocharger is supplied off of the #4 cam journal bearing, which can lead to pre-mature bearing wear or failure. Feeding your turbocharger from the oil rifle on the block, ensures adequate supply and prevents failures. Remote feeding the turbo is especially important with high strung factory replacement turbos, like the Fleece Performance Cheetah or Garret's 3794VA and 4094VA turbos.Features: Increased Oil SupplyFactory Garrett Banjo Feed Fits Stock, Fleece Cheetah and Garrett 3794VA and 4094VA TurbosKit includes: High Quality AN fittings, Extra Flexible Smooth Bore Tefllon Hose, Stock Oil Feed Plug, Oil Galley Rifle Fitting
Fumoto Engine Oil Drain Valve F-106 12881 1.00 Fumoto Engine Oil Drain Valve F-106
$ 23.95
Introducing the best way to change oil, the Engine Oil Drain Valve. Install this valve and you can drain your engine oil without tools and without mess. Just lift the lever of this solid brass ball valve and give it a quarter turn to open it. Return the lever to its original position and it locks closed, double sealed to prevent leakage. The Engine Oil Drain Valve is made of corrosion resistant forged brass and stainless steel. The ball valve design provides a straight flow for efficient drainage and a perfect seal when closed. Frozen drain plug and stripped threads are eliminated forever. Drawing samples for oil analysis is as easy as one-two-three. Sizes to fit all cars, light trucks vans heavy-duty trucks and buses. Also fits RVs, marine engines and industrial equipment. The Engine Oil Drain Valve has been tested and granted "Genuine Parts" status by 6 major motor vehicle manufacturers in Japan, including Toyota, Nissan, Mazda, Mitsubishi, Subaru and Isuzu. These approvals were not granted easily and gaining them was a testimony to the quality and durability of Engine Oil Drain Valve. In the United States, the Engine Oil Drain Valve is being installed at the factory level on some of the vehicles/equipment made by Ford, Kohler, Freightliner, Caterpillar, JLG, GEHL, Ingersoll-Rand, Sullair, Toyota, Case, Magnetek, Timberjack, Lincoln Electric, Vermeer, Baldor, Terex, Deutz, Phaser Marine Generator and etc. Installation: Remove original drain plug and drain oil into acceptable receptacle. Insert Engine Oil Drain Valve with gasket* and tighten. Do not over tighten. Make sure valve is closed and refill crankcase. N-Series Valve: Unlike the standard Engine Oil Drain Valve which was designed for automobile and truck applications, the N-SERIES valve is equipped with a Nipple to enable the operator to attach a hose and drain the engine oil out of tight spots and away where access to the plug itself and resulting mess are often problems. Like the standard Engine Oil Drain Valve, this spring assisted ball valve replace standard oil drain plug making oil changes easier and saving valuable time. Also ideal for oil sampling analysis as a small amount of oil can be drawn without shutting off the engine. The N-SERIES Engine Oil Drain Valve takes the mess out of routine maintenance on industrial engines. "N-SERIES" valves are not recommended for cars with low ground clearance. Please make sure there is enough distance from the ground. Warning: For users under extreme conditions: If you are using the Engine Oil Drain Valve on off-road vehicles such as farm tractors and logging equipment under extreme environment (i.e. corn fields, brush areas), it is recommended that a hose clip as shown below be used for extra safety and security. The hose clip, which can be purchased at any hardware stores, will firmly keep the lever in the locked position at all times. Limited Warranty Fumoto Engineering of America offers a LIFE TIME WARRANTY on its product, against faulty workmanship and/or material to the original purchaser (with proof of purchase). For any defective product, Fumoto Engineering of America will replace the product at no charge. Fumoto Engineering of America will also indemnify any consequential damages to the engine/vehicle which are directly caused by the defective product. This warranty does not cover any damages due to misuse, abuse, negligence or accident. This warranty is valid only in the United States and Canada. Applications include: 2002-2009 Dodge Sprinter Van 2.7 and 3.0L Engine 2001-2015 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LML 2007-2008 Jeep Grand Cherokee Diesel 3.0L Thread Size: 14mm-1.5
Mishimoto MMODP-1415B Magnetic Oil Drain Plug 26483 1.00 Mishimoto MMODP-1415B Magnetic Oil Drain Plug
$ 15.95
The Mishimoto MMODP-1415B Magnetic Oil Drain Plug for your 2001-2016 GM 6.6L Duramax and 2012-2016 Ford 6.7L Powerstroke Engine is designed to remove metal fragments in engine oil, thus extending and protecting the life of your engine.These oil drain plugs are constructed from billet 6061 aluminum with a powerful neodymium magnet. The magnet provides the strength to seize and collect bearing or other harmful metallic fragments in engine oil, effectively removing them from circulation. This drain plug features a robust 24 mm hex head and precise, durable threads for consistent use without fear of stripping. Mishimoto Magnetic Oil Drain Plugs include a dependable dowty seal for superior protection against leaks. This M14 x 1.5 Mishimoto Magnetic Oil Drain Plug is perfect for extending the life of your Powerstroke and includes the Mishimoto Lifetime Warranty! Features: 6061 Aluminum Construction Constructed with a neodymium magnet Reduces metal debris in your engine Increases engine life Dowty oil seal included Mishimoto Lifetime Warranty *Powerstroke Application Note: This drain plug WILL NOT fit the 2011 and early 2012 6.7L Powerstroke models that are equipped with a plastic or "composite" oil pan. Please confirm fitment on your 2012 model before ordering. LIFETIME WARRANTY Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer.A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product. The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid. MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products
PPE 114001000 Internal Oil Cooler Delete Kit 4659 10.00 PPE 114001000 Internal Oil Cooler Delete Kit
$ 269.99
The PPE 114001000 Internal Oil Cooler Delete Kit is designed for high performance 2001-2010 GM 6.6L Duramax engines and made from billet hard anodized aluminum. This kit will allow you to remove the stock unit and run a much larger and less restrictive external oil cooler. The easy bolt-on adapter uses existing factory oil-cooler mounting bolts and includes an engine water bypass adapter. The PPE Internal Oil Cooler Delete Kit is excellent for marine or high performance hot rod installations where space is limited. Features: 1/8 inch NPT oil temp. sender port (measures oil temp. entering block) Billet hard-anodized aluminum Compact design adds additional clearance for tight engine frames Industry Standard (dash 16) -16/1 inch oil inlet/outlets
PPE 114002000 Billet Aluminum Remote Filter 26284 8.00 PPE 114002000 Billet Aluminum Remote Filter
$ 359.99
The PPE 114002000 Billet Aluminum Remote Filter is designed to use in many Duramax engine installations, such as marine applications that require relocating the oil filter so it can be accessed for basic maintenance. Designed to work in conjunction with PPEs Internal Oil Cooler Delete Kit. Made from billet aluminum, this robust remote filter mount has a higher flow-rate than the stock filter assembly and is compatible with a HP6A Racing Filter. It features 3/4 inch NPT oil inlets and outlets for -16/1 inch oil lines, threaded ports for oil pressure/oil temp gauge senders. Additional port for oil PSI/oil temp senders, and adjustable mounting bracket. Features: Allows For Oil Filter Relocation Works In Many Custom Applications 3/4" NPT Oil Inlet and Outlet Uses HP6A Racing Oil Filter
PPE 114051000 Dry Sump Oil Pan 20816 15.00 PPE 114051000 Dry Sump Oil Pan
$ 1166.39
The PPE 114051000 Dry Sump Oil Pan fits your 2001-2015 GM 6.6L Duramax with a dry-sump lubricating system. In a dry sump, engine oil is stored in a tank outside the engine rather than in the oil pan. There are at least two oil pumps in a dry sump - one pulls oil from the sump and sends it to the tank, and the other pump takes oil from the tank and sends it to lubricate the engine. The minimum amount of oil possible remains in the engine. Dry sump advantages over wet sumps: Because a dry sump does not need to have an oil pan big enough to hold the oil under the engine, the main mass of the engine can be placed lower in the vehicle. This helps lower the center of gravity and can also help aerodynamics. The oil capacity of a dry sump can be as big as you want. The tank holding the oil can be placed anywhere on the vehicle. In a wet sump, turning, braking and acceleration can cause the oil to pool on one side of the engine. This sloshing can cause oil starvation as the pick-up loses contact with the oil or could cause the crankshaft to dip into the oil as it turns. Excess oil on the crankshaft can cut horsepower. Dyno improvements of as much as 15 horsepower by switching to a dry sump oil system. Features: Low Profile - 4" Cast 356 T6 Aluminum 4 Oil Scavenge Ports -12ORB To -12AN Screened Plugs Stainless Steel Crankcase Oil Scrapers Gusseted Reinforced Mounting Flanges Note: Not for use on stock engines. For use with a dry-sump oiling system only.
PPE 1140520X0 High Capacity Cast Aluminum Oil Pan 31478 6.00 PPE 1140520X0 High Capacity Cast Aluminum Oil Pan
5 5 2
$ 263.99
The PPE 114052000 and 114052020 High Capacity Cast Aluminum Oil Pan addresses the issues of the factory oil pan in your 2001-2010 GM 6.6L Duramax. The stock Duramax engine oil pan leaves a lot to be desired. In addition to being steel (poor at heat dissipation), there is a valley in the pan which prevents 100% of your old oil from being drained out during an oil change. This leaves behind almost a quart of the dirtiest oil. PPE has solutions to these problems. These new pans are made in the USA from high-quality cast aluminum for strength and optimum heat dissipation. PPEs pan is engineered with a flat bottom, allowing you to drain all of your engine oil, so no dirty oil is left in the pan. The pan holds an extra quart of oil so you will see reduced oil temperature, higher oil pressure, and better lubrication to your engines vital components Another feature of the our Duramax engine oil pan is the unshrouded oil pickup. The engine will have no restriction near the oil pickup resulting in higher oil pressure. Higher oil pressure equals better lubrication. Also included is a billet stainless steel PPE drain plug which contains a powerful Neodymium magnet that attracts and holds ferrous metals, keeping them from damaging your engines vital internal components. Features: One quart additional oil capacity Flat bottom allows for complete oil drainage Cast aluminum construction reduces engine noise Fixes complete oil drainage problem associated with GM pan Cast from high-grade aluminum alloy for optimal heat dissipation High-power Neodymium magnet equipped, hardened stainless steel billet drain plug
PPE 516000800 Oil Galley Feed Line Fitting 18042 1.00 PPE 516000800 Oil Galley Feed Line Fitting
$ 35.99
This PPE 516000800 Oil Galley Feed Line Fitting was designed to work perfectly with PPEs T4 Oil Feed Line Adapter to provide many benefits hand and hand. Its -6 AN fitting easily connects the engines oil galley to the turbocharger via a Stainless Steel braided oil pressure feed line (not included). While also increasing the oil flow capacity available for single or twin turbo applications. Features: Draws directly from oil galley Works with PPE T4 Oil Feed Line Adapter
TAKE 10% OFF SITEWIDE* WITH OUR MEMORIAL DAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: MEMORIAL10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 5/28/19 only.