Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Alliant AP0085 Injector Brush Kit 26652 1.00 Alliant AP0085 Injector Brush Kit
$ 57.55
The Alliant AP0085 Injector Brush Kit is a must have item in the toolbox of any Ford Powerstroke or Duramax technician. The Alliant Injector Brush Kit provides you with the proper tools to clean the injector bore and seat while installing new injectors in your engine. Features:Cleans Injector Bore and Injector SeatFits 6.0L/6.4L and 6.7L Powerstroke, Duramax Engines and More (see below)Application Note:2003-2016 Ford 4.5L, 6.0L, 6.4L, 6.7L Powerstroke Engines2003-2014 Navistar VT365, VT275, MaxxForce 5 and 72001-2016 GM 6.6L Duramax
BD-Power 1076615 33% Injector Set 27931 14.00 BD-Power 1076615 33% Injector Set
$ 3036
The BD-Power 1076615 33% Injector Set increases power and performance on your 2007.5-2010 GM 6.6L Duramax LMM. Excessive smoke, poor fuel economy, rough running, sluggish response or even high vehicle mileage are signs that your injectors might be wearing out. If diagnosis shows you need to replace them on your Duramax 6.6L diesel then this is the perfect set for you. All BD-Power Duramax 6.6L injectors are built with OE remanufactured bodies. BD's injection lab has common rail test benches to help diagnose any engine performance symptoms or injector calibration. BD Diesel is one of only a few shops with the capability, the know-how and equipment to fully test and rebuild common rail injectors and high pressure fuel pumps. The the 33% upgrade is about a 60RWHP increase over stock and is geared towards the daily driver that's looking for all around power and efficiency. Features: +33% Over Stock Approximately 60 RWHP Increase Remanufactured To Stringent Specifications Pre-Tested To Ensure Function and Reliability
BD-Power 1076665 33% Injector Nozzle Set 27665 1.00 BD-Power 1076665 33% Injector Nozzle Set
$ 1500
The BD-Power 1076665 33% Injector Nozzle Set is designed to increase power and performance in your 2007.5-2010 GM 6.6L Duramax LMM. Made from genuine OE nozzles, the 33% upgrade is geared towards the daily driver that's looking for all around power and efficiency. Features: +33% 60HP Increase Sold As A Complete Set
BD-Power 1076666 43% Injector Nozzle Set 27666 1.00 BD-Power 1076666 43% Injector Nozzle Set
$ 1725
The BD-Power 1076666 43% Injector Nozzle Set is designed to increase power and performance in your 2007.5-2010 GM 6.6L Duramax LMM is designed to increase power and performance in your truck. Made from genuine OE nozzles, the 43% upgrade is geared towards street and strip applications for trucks with fuel system, tuning and air flow upgrades. Features: +43% 90HP Sold As A Complete Set
BD-Power 1076668 73% Injector Nozzle Set 27668 1.00 BD-Power 1076668 73% Injector Nozzle Set
$ 2225
The BD-Power 1076668 73% Injector Nozzle Set is designed to increase power and performance in your 2007.5-2010 GM 6.6L Duramax LMM. Made from genuine OE nozzles, the 73% upgrade is geared towards competition applications for trucks that are heavily modified. Features: +73% 180HP Increase Sold As A Complete Set
BD-Power 1714520 Stock Performance Plus Fuel Injector 60666 2.00 BD-Power 1714520 Stock Performance Plus Fuel Injector
$ 329
Add the BD-Power 1714520 Stock Performance Plus Fuel Injector to your 2007.5-2010 GM 6.6L Duramax LMM. Constructed from OE quality remanufactured injectors, Performance Plus Fuel Injector are expertly engineered. All Performance Plus Fuel Injector have been remanufactured and tested to stringent specifications to ensure functionality and performance.Remanufacturing Process Includes:Replaced rail connections, thru-rod, nuts and belleville washers, o-rings, springs and spool valvesControl Valve body and spool are precision ground to specific diametrical clearance for sealing and directing oil for injector operationAll spools are replaced 100% and machined to original specificationEach injector is 100% flow tested and nitrogen tested for leaksFlow volume, leakage rate, max needle lift and valve opening pressure (VOP) are also testedAll sealing surfaces are refinished and maintain less than 2 microns of flatnessPrecision honed intensifier body is matched with new plungers to operate at extreme pressures and temperaturesReplaced dampening pins and check plates to prevent cavitationFeatures:Sold IndividuallyRemanufactured 5-15 HP Increase
BD-Power 1715520 Remanufactured Fuel Injector 19104 3.00 BD-Power 1715520 Remanufactured Fuel Injector
$ 329
The BD-Power 1715520 Remanufactured Fuel Injector for your 2007.5-2010 GM 6.6L Duramax is a direct replacement for your factory injector. BD-Power is one of only a few shops with the capability, the know-how and equipment to fully test and rebuild common rail injectors. Remanufactured to stringent specifications, this injector meets or exceeds OE specifications and is a stock horsepower replacement. Sold individually. Features: Remanufactured 2-Year Warranty Pre-Tested Before Shipping Stock HP Level - Factory ReplacementOE Cross Reference#: 0986435520
BD-Power 1716615 33% Remanufactured Fuel Injector 60689 2.00 BD-Power 1716615 33% Remanufactured Fuel Injector
$ 431.25
Tested to stringent specifications, the BD-Power 1716615 33% Remanufactured Fuel Injector is a great replacement for your 2007.5-2010 GM 6.6L Duramax LMM. Each Remanufactured Fuel Injector is constructed from OE quality remanufactured injectors. With the necessary modifications, the Remanufactured Fuel Injector can provide an extra 60 horsepower.Remanufacturing Process Includes:Replaced rail connections, thru-rod, nuts and belleville washers, o-rings, springs and spool valvesControl Valve body and spool are precision ground to specific diametrical clearance for sealing and directing oil for injector operationAll spools are replaced 100% and machined to original specificationEach injector is 100% flow tested and nitrogen tested for leaksFlow volume, leakage rate, max needle lift and valve opening pressure (VOP) are also testedAll sealing surfaces are refinished and maintain less than 2 microns of flatnessPrecision honed intensifier body is matched with new plungers to operate at extreme pressures and temperaturesReplaced dampening pins and check plates to prevent cavitationFeatures:60 HP IncreaseSold IndividuallyRemanufactured
BD-Power 1716616 43% Remanufactured Fuel Injector 60690 2.00 BD-Power 1716616 43% Remanufactured Fuel Injector
$ 437.5
Replace the injectors in your 2007.5-2010 GM 6.6L Duramax LMM with the BD-Power 1716616 43% Remanufactured Fuel Injector. The Remanufactured Fuel Injector is tested to stringent specifications and can add up 90 horsepower with the necessary modifications. Featuring a quality construction, the Remanufactured Fuel Injector is constructed from OE quality remanufactured injectors.Remanufacturing Process Includes:Replaced rail connections, thru-rod, nuts and belleville washers, o-rings, springs and spool valvesControl Valve body and spool are precision ground to specific diametrical clearance for sealing and directing oil for injector operationAll spools are replaced 100% and machined to original specificationEach injector is 100% flow tested and nitrogen tested for leaksFlow volume, leakage rate, max needle lift and valve opening pressure (VOP) are also testedAll sealing surfaces are refinished and maintain less than 2 microns of flatnessPrecision honed intensifier body is matched with new plungers to operate at extreme pressures and temperaturesReplaced dampening pins and check plates to prevent cavitationFeatures:90 HP IncreaseSold IndividuallyRemanufactured
BD-Power 1716618 73% Remanufactured Fuel Injector 60691 2.00 BD-Power 1716618 73% Remanufactured Fuel Injector
$ 481.25
Get a dependable fuel injector for your 2007.5-2010 GM 6.6L Duramax LMM when you purchase the BD-Power 1716618 73% Remanufactured Fuel Injector. Featuring a quality construction, the Remanufactured Fuel Injector is constructed from OE quality remanufactured injectors. The Remanufactured Fuel Injector is tested to stringent specifications and can add up 160 horsepower with the necessary modifications. Remanufacturing Process Includes:Replaced rail connections, thru-rod, nuts and belleville washers, o-rings, springs and spool valvesControl Valve body and spool are precision ground to specific diametrical clearance for sealing and directing oil for injector operationAll spools are replaced 100% and machined to original specificationEach injector is 100% flow tested and nitrogen tested for leaksFlow volume, leakage rate, max needle lift and valve opening pressure (VOP) are also testedAll sealing surfaces are refinished and maintain less than 2 microns of flatnessPrecision honed intensifier body is matched with new plungers to operate at extreme pressures and temperaturesReplaced dampening pins and check plates to prevent cavitationFeatures:160 HP IncreaseSold IndividuallyRemanufactured
Bostech DE01369 Platinum Series Remanufactured Fuel Injector 32550 3.00 Bostech DE01369 Platinum Series Remanufactured Fuel Injector
$ 359.95
Choose the Bostech DE01369 Platinum Series Remanufactured Fuel Injector when replacing injectors on your 2007.5-2010 GM 6.6L Duramax LMM. The Platinum Series is a step up from the standard remanufactured injector. Like all Bostech Remanufactured Injectors, each unit is 100% disassembled, inspected, polished, and certified to OE specs with all mating surfaces lapped to a precision finish. On the Platinum Series, Bostech installs new nozzles, valves, and electrical solenoid for an even more complete remanufacturing process. After assembly, each unit is tested for performance and function, and new o-rings and seals are installed. Injectors sold individually. Features: Platinum Series Remanufactured Stock Replacement 24 Month Unlimited Mileage Warranty Replaces OE Part#: 98002368, 97780360, 0 445 120 082, 0 986 435 520
Bostech DE669 Silver Series Remanufactured Fuel Injector 13166 3.00 Bostech DE669 Silver Series Remanufactured Fuel Injector
$ 259.95
Restore performance in your 2007.5-2010 GM 6.6L Duramax LMM with the Bostech DE669 Silver Series Remanufactured Fuel Injector. Bostech Silver Series Fuel Injectors are 100% disassembled, then each component is inspected, polished, and certified to original specifications. All Mating surfaces are lapped to a precision finish, and then assembled and tested to OE quality and performance. New Seals and o-rings are also installed before packaging. Injectors sold individually. Features: Remanufactured Stock Replacement 13 Month Unlimited Mileage Warranty Replaces OE Part#: 98002368, 97780360, 0 445 120 082, 0 986 435 520
Bostech DEC010523 Injector Line (Cylinder 1 & 8) 34625 1.00 Bostech DEC010523 Injector Line (Cylinder 1 & 8)
$ 49.95
The Bostech DEC010523 Injector Line is an individual Injector Line for Cylinders 1 or 8 on your 2007.5-2010 GM 6.6L Duramax. Replacing Injector Lines when replacing Injectors is always a good idea to avoid possible contamination. Features: Fits Cylinder 1 or 8 Each Line Sold Individually13 Month Unlimited Mileage WarrantyReplaces OE Part# 98006523
Bostech DEC010524 Injector Line (Cylinder 3 & 6) 34626 1.00 Bostech DEC010524 Injector Line (Cylinder 3 & 6)
$ 49.95
The Bostech DEC010524 Injector Line fits Cylinders 3 or 6 on your 2007.5-2010 GM 6.6L Duramax. Bostech's Injector Lines provide you with a direct replacement that is built to meet or exceed OE specifications for a perfect fit and finish. Features: Fits Cylinder 3 or 6 Each Line Sold Individually13 Month Unlimited Mileage WarrantyReplaces OE Part #: 98006524
Bostech DEC010526 Injector Line (Cylinder 4 & 5) 34627 1.00 Bostech DEC010526 Injector Line (Cylinder 4 & 5)
$ 49.95
Replace the injector line for Cylinder 4 or 5 in your 2007.5-2010 GM 6.6L Duramax with the Bostech DEC010526 Injector Line. Bostech Injector Lines feature a high quality construction and provide you with an OE quality fit and finish. Features:Fits Cylinder 4 or 5Each Line Sold Individually13 Month Unlimited Mileage WarrantyReplaces OE Part#: 98006526
Bostech DEC010527 Injector Line (Cylinder 2 & 7) 34628 1.00 Bostech DEC010527 Injector Line (Cylinder 2 & 7)
$ 49.95
Replace the Injector Lines in your 2007.5-2010 GM 6.6L Duramax whenever you install new injectors. Bostech's Injector Lines help avoid fuel contamination from old corroded injector lines. This gives your new injectors maximum life expectancy, and performance.Features:Fits Cylinder 2 or 7Each Line Sold Individually13 Month Unlimited Mileage WarrantyReplaces OE Part# 98006527
Bostech DEC010529 Injector Line Set 34624 3.80 Bostech DEC010529 Injector Line Set
$ 349.95
Use the Bostech DEC010529 Injector Line Set when replacing the injectors in your 2007.5-2010 GM 6.6L Duramax LMM to avoid contaminating your new injectors. Built to meet or exceed OE specifications, Bostech's Injector Line Sets provide you with a factory-like fit and finish. Features:New Injector Line Set13 Month Unlimited Mileage WarrantyOE Cross Reference Numbers: 98006523 (Cyl. 1and8), 98006527 (Cyl. 2and7) 98006524 (Cyl. 3and6) 98006526 (Cyl. 4and5)
Bostech ISK124 Injector Seal Kit 32517 1.00 Bostech ISK124 Injector Seal Kit
$ 4.95
Reseal the Injectors in your 2007.5-2010 GM 6.6L Duramax LMM with the Bostech ISK124 Injector Seal Kit. Bostech gaskets and seals are manufactured from top quality materials that meet or exceed OE specifications for factory-like performance and life. Features: Sold Individually 13 Month Unlimited Mileage Warranty
XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:

  • Effective 3/16 we have shifted Customer Service hours to 8:30 – 7:00pm EST. To ensure compliance with New Jersey’s recent curfew.
  • Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
  • Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
  • All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.