Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
AFE 46-20112 BladeRunner Intercooler w/ Tubes 46-20112 17757 90.00 AFE 46-20112 BladeRunner Intercooler w/ Tubes 46-20112
$ 1691
This BladeRunner Intercooler represents the next generation of intercoolers. The BladeRunner intercoolers utilize a 2.5" bar and plate design that is larger than stock and outflows OE style tube and fin core designs by 38%! End Tanks: The unique BladeRunner end tanks are constructed out of 3/16'' TIG welded aluminum plate tanks that incorporate three multi-directional vanes. Multi-Directional Vane Technology: The BladeRunner MDV technology is used to direct hot air flow through the entire intercooler core. This allows for greater cooling than competitors units. 2.5" Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the OEM. Multiple Auxiliary Ports: Four tapped 1/8" ports are supplied on the intercooler tubes for easy installation of gauges or nitrous oxide systems. Billet Aluminum Inlet/Outlets: Each BladeRunner Intercooler uses billet aluminum inlets and outlets for superior strength and durability. This intercooler also features 3" inlet/outlet connections mated to oversized boost tubes, included. Tig-Welded: 100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. Flow and Performance: The intercooler tubes provided are constructed of 3" mandrel bent powder-coated stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Comes complete with 4-ply heavy duty couplings and constant tension T-bolt clamps for a tight and secure installation. The BladeRunner Intercooler is test pressure rated at 200psi which is perfect for high boost applications. Don't waste your time and money on modified factory intercoolers. Invest in the aFe BladeRunner intercooler, the most sophisticated intercooler design on the planet. *Legal in California only for racing vehicles which may never be used upon a highway." Features: 100% TIG-Welded Lower EGT's Larger Than Stock Multi-Directional Vanes 38% Flow Over Stock 2.5" Inlets/Outlets Hassle Free Installation 3" Stainless Steel Tubes 4-Ply Heavy Duty Couplings Constant Tension T-Bolt Clamps
AFE 46-20114-B BladeRunner Hot & Cold Intercooler Tube Combo Kit 29566 16.00 AFE 46-20114-B BladeRunner Hot & Cold Intercooler Tube Combo Kit
2 5 1
$ 399
The AFE 46-20114-B BladeRunner Hot and Cold Intercooler Tube Combo Kit increases flow and performance in your2011-2016 GM 6.6L Duramax LML. This Combo Kit outflows the stock intercooler tubes by 15% to provide maximum flow. Perfect Fit: Utilizes the factory mounting locations for a hassle-free installation. Includes high quality stainless steel T-bolt clamps and heavy-duty 5-Ply polyester reinforced couplings for strength and durability. The tubes also work with OEM or aFe's upgraded intercooler (46-20111). Flow and Performance: aFe Power's intercooler tubes are constructed from 3" (hot side) and 3" (cold side) mandrel-bent stainless steel tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. The smooth transition bends decrease turbulence, minimize pressure loss, while increasing horsepower and torque. aFe Badging: A unique laser-cut aFe Power logo plate is welded-on for an aggressive style. Features: 3" Hot and Cold Side Outflows Stock Tubes By 15% Mandrel-Bent Stainless Tubing Works With AFE and OEM Intercooler Wrinkle Black Powdercoat For Heat and Corrosion Resistance
AFE 46-20118 BladeRunner Intercooler Tube 17758 5.00 AFE 46-20118 BladeRunner Intercooler Tube
$ 190
The aFe intercooler tube represents the next generation of Diesel performance products. Perfect Fit: Tube lines up directly to factory couplings for a convenient, tight and secure installation with minimal parts. Flow and Performance: The intercooler tube is constructed of 3"" mandrel bent powder-coated stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Installation is a snap: Utilizing the factory mounting locations provides stability and a hassle-free installation. aFe Badging: Unique stainless steel laser-cut aFe Power logo plate is welded-on for an aggressive style. *Legal in California only for racing vehicles which may never be used upon highway." Features: Stainless Steel 100% MIG-Welded Welded-On aFe Power Plate All Hardware Included Hassle-Free Installation Fits Cold Side
AFE 46-20119 BladeRunner Intercooler Tube 17759 9.00 AFE 46-20119 BladeRunner Intercooler Tube
2 5 1
$ 249.85
The aFe intercooler tube represents the next generation of Diesel performance products. Perfect Fit: Tube lines up directly to factory couplings for a convenient, tight and secure installation with minimal parts. Flow and Performance: The intercooler tube is constructed of 3"" mandrel bent powder-coated stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Installation is a snap: Utilizing the factory mounting locations provides stability and a hassle-free installation. aFe Badging: Unique stainless steel laser-cut aFe Power logo plate is welded-on for an aggressive style. *Legal in California only for racing vehicles which may never be used upon highway." Features: 3" Stainless Steel 100% MIG-Welded Welded-On aFe Power Plate All Hardware Included Hassle-Free Installation
Banks Power 25993 Boost Tube System 35505 17.00 Banks Power 25993 Boost Tube System
$ 369
The Banks 25993 Boost Tube System will get the turbo spooling faster in your 2013-2016 GM 6.6L Duramax LML. These higher flowing tubes retain more boost pressure between the turbo, intercooler, and intake which results in maximum horsepower. The included 4 and 5-ply heavy-duty silicone couplers combined with spring-loaded constant tension clamps for a tight, reliable hold under high boost conditions. Banks hot and cold side tubes are constructed from a high-quality mandrel bent 3.5" aluminized steel tube for a smooth constant diameter and have up to 105% greater flow area versus the stock tubes.Features:Quicker Turbo SpoolHot and Cold Side TubesGray Powder Coat FinishMandrel Bent 3.5" Tube DiameterIncreases Performance and Lowers EGT'sIncludes Heavy-Duty Silicone Couplers and ClampsNote: This kit is designed to work with the stock intercooler or aftermarket intercoolers with stock inlet and outlet sizes.
HSP LML Hot Side Intercooler Pipe 28243 16.00 HSP LML Hot Side Intercooler Pipe
5 5 1
$ 185.25
The HSP LML Hot Side Intercooler Pipe for your 2011-2016 GM 6.6L Duramax LML outflows the factory pipe by up to 40%. This hot side intercooler pipe eliminates the poorly designed factory lower intercooler boot by using a straight connection to the intercooler. This prevents the boot from blowing off under heavy loads. Custom powder coating is available to really make a statement under the hood of your LML!Features:Direct Replacement40% Increased FlowHigh Strength Silicone BootsMultiple Powder Coat Options Available
HSP LML Max Flow Bridge Kit 30204 22.00 HSP LML Max Flow Bridge Kit
4 5 1
$ 793.25
The HSP LML Max Flow Bridge Kit for your 2011-2016 GM 6.6L Duramax LML includes a max flow bridge, cold side intercooler pipe, and turbo inlet all in one package. HSP's components work perfectly together to give you the most efficiency and power possible! This custom design can be used with HSP's single or compound turbo systems. Multiple powder coat options are available and all the necessary installation hardware is included!Features:Maximum EfficiencyMandrel Bent PipeHigh Strength Silicone BootsIncreased Performance And Spool UpNote: Requires removal of the EGR system.
MBRP IC1979 3" Driver Side Intercooler Pipe 16763 10.00 MBRP IC1979 3" Driver Side Intercooler Pipe
5 5 1
$ 296.99
The MBRP IC1979 3" Driver Side Intercooler Pipe adds a massive 60% increase in flow. That mean greater performance, faster turbo spool and a cooler running operating environment. All at a price and quality that you can't beat. Features: Fits Driver Side 60% Increased Flow Increased Performance 4-Ply Heavy Duty Couplings Spring Loaded Constant-Tension Clamps Mandrel Bent 3" Tubing Show Quality Polished 6061 Aluminum
Mishimoto MMICP-DMAX-11CBK Cold-Side Intercooler Pipe & Boot Kit 25427 9.00 Mishimoto MMICP-DMAX-11CBK Cold-Side Intercooler Pipe & Boot Kit
$ 280.95
The Mishimoto MMICP-DMAX-11CBK Cold-Side Intercooler Pipe and Boot Kit for your 2011-2016 GM 6.6L Duramax is an upgrade that increases looks, performance and reliability on your Duramax Pickup. The plastic factory pipes and boots do not stand a chance against the heat and pressure of your high-powered Duramax;. Upgrade today to the Mishimoto kit for increased reliability, durability, and performance. The Mishimoto cold-side pipes are constructed of 3.5 mandrel-bent aluminum with a polished finish. This pipe kit features a two-piece design for easy installation and removal, as well as a CNC-machined AIT sensor bung allowing you to retain your factory AIT sensor. The cold-side pipe eliminates restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs. This kit includes Mishimoto Silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto Constant-Tension T-Bolt Clamps for accurate and consistent holding power. The cold-side pipe and boot kit is the perfect addition to the Mishimoto 6.6L Duramax Performance Intercooler. This kit is made in the USA and includes our signature Mishimoto Lifetime Warranty. Features: 3.5" Mandrel Bent Construction Direct Fit Replacement Silicone Boots With DuraCore Specifications: Pipe Construction: Polished Aluminum Diameter: 3.5" Boot 1: 3.00 to 3.50 Boot 2: 3.00 to 3.50 Boot 3: 3.50 to 3.50 (2) 3.25 Constant-Tension T-Bolt Clamps (1) 4.0 Constant-Tension T-Bolt Clamps Purchase Includes: (1) Aluminum Intercooler Pipe w/ AIT Sensor Bung (1) Aluminum Intercooler Pipes (3) Silicone Boots with DuraCore Technology (6) Constant-Tension T-Bolt Clamps (2) Aluminum Mishimoto "M" Logo Badges Mishimoto Lifetime Warranty Lifetime Warranty Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer.A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product. The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid. MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products. Accident Protection Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.
Mishimoto MMICP-DMAX-11HBK Hot-Side Intercooler Pipe & Boot Kit 25428 12.00 Mishimoto MMICP-DMAX-11HBK Hot-Side Intercooler Pipe & Boot Kit
$ 304.95
The Mishimoto MMICP-DMAX-11HBK Hot-Side Intercooler Pipe and Boot Kit increases reliability, performance and looks under the hood of your 2011-2016 GM 6.6L Duramax LML. The factory hot-side pipe on your truck features numerous restrictive bends that choke the engine with 2.5" piping. The 3" diameter of the Mishimoto intercooler pipes provides a significant increase in airflow that results in more power and lower EGTs. The Mishimoto hot-side intercooler pipe and boot kit is a direct bolt-on upgrade and features mandrel-bent aluminum with a polished finish. For ease of install, Mishimoto designed this kit as a two-piece design, similar to the factory pipe. Mishimoto intercooler piping kits feature our Silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto Constant-Tension T-Bolt Clamps for accurate and consistent holding power. This hot-side pipe is the perfect addition to the Mishimoto 6.6L Duramax Performance Intercooler. The Mishimoto hot-side intercooler pipe and boot kit is made in the USA and includes our signature Mishimoto Lifetime Warranty. Features: 3" Polished Aluminum Tubing Mandrel Bent Tubing Direct Bolt-On Kit Specifications: Boot 1: 2.36 to 3.00 Boot 2: 2.72 to 3.00 Boot 3: 3.00 to 3.00 (1) 2.5" Constant-Tension T-Bolt Clamp (5) 3.25" Constant-Tension T-Bolt Clamp Kit Includes: (1) Aluminum Intercooler Pipe w/ AIT Sensor Bung (1) Aluminum Intercooler Pipes (3) Silicone Boots with DuraCore Technology (6) Constant-Tension T-Bolt Clamps (2) Aluminum Mishimoto "M" Logo Badges Mishimoto Lifetime Warranty
Mishimoto MMICP-DMAX-11KBK Intercooler Pipe & Boot Kit 25429 21.00 Mishimoto MMICP-DMAX-11KBK Intercooler Pipe & Boot Kit
$ 528.95
The Mishimoto MMICP-DMAX-11KBK Intercooler Pipe and Boot Kit for your 2011-2016 GM 6.6L Duramax LML improves power, reliability and underhood looks on your Duramax. The factory pipes on your truck feature numerous restrictive bends that choke the engine with small piping. The increased size of the Mishimoto intercooler pipes provide a significant increase in airflow that results in more power and lower EGTs. The Mishimoto intercooler pipe and boot kit is a direct bolt-on upgrade and features mandrel-bent aluminum with a polished finish. Mishimoto intercooler piping kits feature our silicone boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. Features: 3.0" Hot Side 3.5" Cold Side Polished Aluminum Construction Mandrel Bent Tubing Direct Bolt-On Kit Specifications: Boot 1: 2.36 to 3.00 Boot 2: 2.72 to 3.00 Boot 3: 3.00 to 3.00 Boot 4: 3.00 to 3.50 Boot 5: 3.00 to 3.50 Boot 6: 3.50 to 3.50 (1) 2.5 Constant-Tension T-Bolt Clamp (7) 3.25 Constant-Tension T-Bolt Clamps (4) 4.0 Constant-Tension T-Bolt Clamps Purchase Includes: (1) Aluminum Intercooler Pipe w/ AIT Sensor Bung (3) Aluminum Intercooler Pipes (6) Silicone Boots with DuraCore Technology (12) Constant-Tension T-Bolt Clamps (2) Aluminum Mishimoto "M" Logo Badges Mishimoto Lifetime Warranty
Mishimoto MMINT-DMAX-11K Intercooler & Pipe Kit 25430 98.00 Mishimoto MMINT-DMAX-11K Intercooler & Pipe Kit
$ 1473.95
The Mishimoto MMINT-DMAX-11K Intercooler and Pipe Kit for your 2011-2016 GM 6.6L Duramax LML will support substantial boost pressure in your stock or highly modified truck. High intake and exhaust gas temperatures can reduce performance and potentially cause engine damage. Protect your investment by upgrading to the Mishimoto 6.6L Duramax LML intercooler. This Duramax intercooler is precision engineered with durable cast aluminum end tanks and an efficient bar-and-plate core, all designed for improved airflow, lower intake temperatures, and improved EGTs. This intercooler is paired with the Mishimoto Chevrolet/GMC 6.6L Duramax Intercooler Pipe and Boot Kit for even more protection against boost pressure. The Duramax LML intercooler features a 101% increase in core volume and is 73% thicker compared to the factory cooler. Offered in Sleek Silver or Stealth Black, the Mishimoto 6.6L Duramax intercooler is protected by our signature Mishimoto Lifetime Warranty. Features: High Quality Aluminum Construction Increased Power and Efficiency Bar-and-Plate Construction Intercooler and Plumbing Specifications: Overall Size: 45.7 x 26.2 x 5.3 Core Size: 36.14" x 23.01" Inlet: 3.00" (76mm) Outlet: Factory-Style Quick Disconnect Core Thickness: 2.72" Tank Wall Thickness: 4mm MMINT-DMAX-11KBK (Black) MMINT-DMAX-11KSL (Silver) Hot Side: 3.0" Pipe Diameter Cold Side: 3.5" Pipe Diameter Clamp Sizes: (1) 2.5", (7) 3.25, (4) 4.0 Boot 1: 2.36 to 3.00 Boot 2: 2.72 to 3.00 Boot 3: 3.00 to 3.00 Boot 4: 3.00 to 3.50 Boot 5: 3.00 to 3.50 Boot 6: 3.50 to 3.50 Purchase Includes: Mishimoto Intercooler (4) M6 x 1.0 x 20mm Bolts and Washers (2) M8 x 1.25 x 35mm Bolts and Washers Mishimoto Lifetime Warranty Warranty: Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer. A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product.The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid. MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products. Accident Protection Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident. For all warranty claims, please contact Mishimoto.
Pusher LML-BT Max HD Charge Tube 32880 15.00 Pusher LML-BT Max HD Charge Tube
$ 399.99
The Pusher LML-BT Max HD Charge Tube for your 2011-2015 GM 6.6L Duramax is the same Max HD Charge Tube used in the Pusher Compound Turbo System. Together they have been tested and proven on trucks ranging from 300HP daily driven trucks to heavy hauling tow rigs, to 1000HP plus drag and mud race trucks. With a 3" mandrel bent construction, the Max HD Charge Tube has been flow bench tested and proven to produce 27% more air over the OEM parts when subjected to the same inlet boost pressure. This HD Charge Tube Replaces all factory passenger-side charge plumbing from the outlet of the intercooler to the factory y-bridge. Featuring a fully TIG welded design for beautiful welds and optimal penetration without impacting air flow, along with CNC machined laser cut flanges for easy mounting to your engine. Includes hardware, gaskets and wire loom for a complete installation. Features: 3" Mandrel Bent Design Fully Tig Welded Design With CNC Machined Flanges Supplies Your LML Engine With 27% Increased Air Flow Application Notes: This product is not compatible with the factory EGR system. You must have off-road tuning and an EGR Race Track Kit in order to install this product. This product has a flanged end that is designed to bolt up to your stock y-bridge.
Pusher LML-HP Max 3" Driver-Side Charge Tube 32881 15.00 Pusher LML-HP Max 3" Driver-Side Charge Tube
$ 199.99
The Pusher LML-HP Max 3" Driver-Side Charge Tube replaces the factory driver-side charge pipe in your 2011-2015 GM 6.6L Duramax. Connecting the outlet of the turbo, to the intercooler, this 3" mandrel-bent tubing supplies your engine with 79.6% more air than the OEM parts it replaces. The fully TIG welded construction produces beautiful welds and provides optimal penetration without impacting air flow. This charge tube eliminates the problematic curved factory coupler at the intercooler inlet, and does not rub on the driver-side inner fender, or any other engine bay components like other designs do. Includes heavy-duty 4-ply silicone couplers and full stainless steel t-bolt clamps. Features: 3" Mandrel Bent Construction Provides 79.6% More Airflow Driver-Side Charge Tube Multiple Color Options Available
TAKE 10% OFF SITEWIDE* WITH OUR MEMORIAL DAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: MEMORIAL10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 5/28/19 only.