Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Longhorn Fab Shop

New Product Filters!
Hide Info
Longhorn Fab Shop
Longhorn Fab Shop is your one stop shop for your Duramax truck. Longhorn offers a full line of custom parts that are made especially for the Duramax.
Longhorn 200973 Upper Console Switch Panel with Dual USB Charger 28040 1.00 Longhorn 200973 Upper Console Switch Panel with Dual USB Charger
$ 43.98
The Longhorn 200973 Center Console Top Switch Panel with Dual USB Charger provides a clean place to mount switches in your 2001-2007 GM 6.6L Duramax. This stainless steel upper center console switch panel comes blank so it's completely up to you to install switches, gauges or whatever you can think of (switches not included). Features: Upper Console Panel Dual USB Charging Ports
Longhorn Fab 200901-LB Traction Bars 28009 72.00 Longhorn Fab 200901-LB Traction Bars
$ 576.4
The Longhorn Fab 200901-LB Traction Bars are specially built for your 2001-2010 GM 6.6L Duramax Long Bed Pickup. Designed as a bolt-on upgrade, these Traction Bars are built using the highest quality hardware and install with just hand tools! Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. Features: Manufactured In The USA! Installs With Basic Hand Tools Laser Cut and CNC Bent Brackets Ensure Perfect Fit NO Welding Or Fabrication Required - Bolt On Kit! Completely Adjustable For Suspension Preloading Without Removal Specifications: Grade 8 Hardware Length: 86" (For Long Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Fits Stock Ride Height Up To 12" Suspension Lift
Longhorn Fab 200901-LB-HS Traction Bars (Hot Street) 28010 75.00 Longhorn Fab 200901-LB-HS Traction Bars (Hot Street)
$ 686.4
The Longhorn Fab 200901-LB-HS Traction Bars with Hot Street Rod Ends are specially built for your 2001-2010 GM 6.6L Duramax Long Bed Pickup. Designed as a bolt-on upgrade, these Traction Bars are built using the highest quality hardware and install with just hand tools! Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. This kit includes the upgraded Hot Street Rod Ends available exclusively from Longhorn Fab Shop. This rod end is for the budget conscience racer/sled puller that still wants an upgraded rod end compared to the standard end. This end is designed to have less noise, smoother operation, and provide more strength than the standard grade end. Features: Manufactured In The USA! Includes Hot Street Rod Ends Installs With Basic Hand Tools Laser Cut and CNC Bent Brackets Ensure Perfect Fit NO Welding Or Fabrication Required - Bolt On Kit! Completely Adjustable For Suspension Preloading Without Removing Specifications: Grade 8 Hardware Length: 86" (For Long Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Fits Stock Ride Height Up To 12" Suspension Lift
Longhorn Fab 200901-LB-PG Pro Grade Traction Bars 28011 75.00 Longhorn Fab 200901-LB-PG Pro Grade Traction Bars
$ 631.4
The Longhorn Fab 200901-LB-PG Pro Grade Traction Bars are specially built for your 2001-2010 GM 6.6L Duramax Long Bed Pickup. Designed as a bolt-on upgrade, these Traction Bars are built using the highest quality hardware and install with just hand tools! Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. This kit includes the professional grade brackets that feature a boxed-in design for extra strength. The increased strength makes these brackets handle anything that you can throw at them. This Traction Bar Kit is a great choice for those who are competing, and pushing the limits of their truck. Features: Manufactured In The USA! Professional Grade Brackets Installs With Basic Hand Tools Laser Cut and CNC Bent Brackets Ensure Perfect Fit NO Welding Or Fabrication Required - Bolt On Kit! Completely Adjustable For Suspension Preloading Without Removing Specifications: Grade 8 Hardware Length: 86" (For Long Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Fits Stock Ride Height Up To 12" Suspension Lift
Longhorn Fab 200901-LB-PG-HS Pro Grade Traction Bars (Hot Street) 28013 76.00 Longhorn Fab 200901-LB-PG-HS Pro Grade Traction Bars (Hot Street)
$ 741.4
The Longhorn Fab 200901-LB-PG-HS Pro Grade Traction Bar (Hot Street) are specially built for your 2001-2010 GM 6.6L Duramax Long Bed Pickup. Designed as a bolt-on upgrade, these Traction Bars are built using the highest quality hardware and install with just hand tools! Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. This kit includes the professional grade brackets that feature a boxed-in design for extra strength. The increased strength makes these brackets handle anything that you can throw at them. This Traction Bar Kit is a great choice for those who are competing, and pushing the limits of their truck. Also included is the Hot Street Rod End Upgrade, this rod end is for the budget conscience racer/sled puller that still wants an upgraded rod end compared to the standard end. This end is designed to have less noise, smoother operation, and provide more strength than the standard grade end. Features: Manufactured In The USA! Professional Grade Brackets Includes Hot Street Rod Ends Installs With Basic Hand Tools Laser Cut and CNC Bent Brackets Ensure Perfect Fit NO Welding Or Fabrication Required - Bolt On Kit! Completely Adjustable For Suspension Preloading Without Removing Specifications: Grade 8 Hardware Length: 86" (For Long Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Fits Stock Ride Height Up To 12" Suspension Lift
Longhorn Fab 200901-SB Traction Bars 28005 67.00 Longhorn Fab 200901-SB Traction Bars
$ 548.9
The Longhorn Fab 200901-SB Traction Bars are specially built for your 2001-2010 GM 6.6L Duramax Short Bed. Designed as a bolt-on upgrade, these Traction Bars are built using the highest quality hardware and install with just hand tools! Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. Features: Manufactured In The USA! Installs With Basic Hand Tools Laser Cut and CNC Bent Brackets Ensure Perfect Fit NO Welding Or Fabrication Required - Bolt On Kit! Completely Adjustable For Suspension Preloading Without Removing Specifications: Grade 8 Hardware Length: 72" (For Short Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Fits Stock Ride Height Up To 12" Suspension Lift
Longhorn Fab 200901-SB-HS Traction Bars (Hot Street) 28006 63.00 Longhorn Fab 200901-SB-HS Traction Bars (Hot Street)
$ 658.9
The Longhorn Fab 200901-SB-HS Traction Bars with Hot Street Rod Ends are specially built for your 2001-2010 GM 6.6L Duramax Short Bed. Designed as a bolt-on upgrade, these Traction Bars are built using the highest quality hardware and install with just hand tools! Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. This kit includes the upgraded Hot Street Rod Ends available exclusively from Longhorn Fab Shop. This rod end is for the budget conscience racer/sled puller that still wants an upgraded rod end compared to the standard end. This end is designed to have less noise, smoother operation, and provide more strength than the standard grade end. Features: Manufactured In The USA! Includes Hot Street Rod Ends Installs With Basic Hand Tools Laser Cut and CNC Bent Brackets Ensure Perfect Fit NO Welding Or Fabrication Required - Bolt On Kit! Completely Adjustable For Suspension Preloading Without Removing Specifications: Grade 8 Hardware Length: 72" (For Short Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Fits Stock Ride Height Up To 12" Suspension Lift
Longhorn Fab 200901-SB-PG Pro Grade Traction Bars 28007 67.00 Longhorn Fab 200901-SB-PG Pro Grade Traction Bars
$ 603.9
The Longhorn Fab 200901-SB-PG Professional Grade Traction Bars are specially built for your 2001-2010 GM 6.6L Duramax Short Bed. Designed as a bolt-on upgrade, these Traction Bars are built using the highest quality hardware and install with just hand tools! Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. This kit includes the professional grade brackets that feature a boxed-in design for extra strength. The increased strength makes these brackets handle anything that you can throw at them. This Traction Bar Kit is a great choice for those who are competing, and pushing the limits of their truck. Features: Manufactured In The USA! Professional Grade Brackets Installs With Basic Hand Tools Laser Cut and CNC Bent Brackets Ensure Perfect Fit NO Welding Or Fabrication Required - Bolt On Kit! Completely Adjustable For Suspension Preloading Without Removing Specifications: Grade 8 Hardware Length: 72" (For Short Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Fits Stock Ride Height Up To 12" Suspension Lift
Longhorn Fab 200901-SB-PG-HS Pro Grade Traction Bars (Hot Street) 28008 65.00 Longhorn Fab 200901-SB-PG-HS Pro Grade Traction Bars (Hot Street)
$ 713.9
The Longhorn Fab 200901-SB-PG-HS Pro Grade Traction Bars are specially built for your 2001-2010 GM 6.6L Duramax Short Bed. Designed as a bolt-on upgrade, these Traction Bars are built using the highest quality hardware and install with just hand tools! Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. This kit includes the professional grade brackets that feature a boxed-in design for extra strength. The increased strength makes these brackets handle anything that you can throw at them. This Traction Bar Kit is a great choice for those who are competing, and pushing the limits of their truck. Also included is the Hot Street Rod End Upgrade, this rod end is for the budget conscience racer/sled puller that still wants an upgraded rod end compared to the standard end. This end is designed to have less noise, smoother operation, and provide more strength than the standard grade end. Features: Manufactured In The USA! Professional Grade Brackets Includes Hot Street Rod Ends Installs With Basic Hand Tools Laser Cut and CNC Bent Brackets Ensure Perfect Fit NO Welding Or Fabrication Required - Bolt On Kit! Completely Adjustable For Suspension Preloading Without Removing Specifications: Grade 8 Hardware Length: 72" (For Short Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Fits Stock Ride Height Up To 12" Suspension Lift
Longhorn Fab 200901-UNV-72 Traction Bars 28033 58.00 Longhorn Fab 200901-UNV-72 Traction Bars
$ 495
The Longhorn Fab 200901-UNV-72 Traction Bars feature a universal fitment and can be installed on a wide range of applications. This kit is the perfect solution to putting traction bars on your truck. Almost all trucks have wheel hop issues right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, you're not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition you'll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. Features: Manufactured In The USA! Frame Mounts Can Be Bolted (C-Frame) Or Welded (Boxed Frame) Laser Cut and CNC-Bent Brackets Ensure Perfect Fit Completely Adjustable For Suspension Preloading Without Removing Specifications: Grade 8 Hardware Length: 72" (Fits Most Short Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Radiused Rear Axle Tabs (Welding Required)
Longhorn Fab 200901-UNV-72-HS Traction Bars (Hot Street) 28034 60.00 Longhorn Fab 200901-UNV-72-HS Traction Bars (Hot Street)
$ 605
The Longhorn Fab 200901-UNV-72-HS Traction Bars feature a universal fitment and can be installed on a wide range of applications. This kit is the perfect solution to putting traction bars on your truck. Almost all trucks have wheel hop issues right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. This kit includes the upgraded Hot Street Rod Ends available exclusively from Longhorn Fab Shop. This rod end is for the budget conscience racer/sled puller that still wants an upgraded rod end compared to the standard end. This end is designed to have less noise, smoother operation, and provide more strength than the standard grade end. Features: Hot Street Rod Ends Manufactured In The USA! Frame Mounts Can Be Bolted (C-Frame) Or Welded (Boxed Frame) Laser Cut and CNC-Bent Brackets Ensure Perfect Fit Completely Adjustable For Suspension Preloading Without Removing Specifications: Grade 8 Hardware Length: 72" (Fits Most Short Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Radiused Rear Axle Tabs (Welding Required)
Longhorn Fab 200901-UNV-86 Traction Bars 28035 68.00 Longhorn Fab 200901-UNV-86 Traction Bars
$ 522.5
The Longhorn Fab 200901-UNV-86 Traction Bars feature a universal fitment and can be installed on a wide range of applications. This kit is the perfect solution to putting traction bars on your truck. Almost all trucks have wheel hop issues right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. Features: Manufactured In The USA! Frame Mounts Can Be Bolted (C-Frame) Or Welded (Boxed Frame) Laser Cut and CNC-Bent Brackets Ensure Perfect Fit Completely Adjustable For Suspension Preloading Without Removing Specifications: Grade 8 Hardware Length: 86" (Fits Most Long Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Radiused Rear Axle Tabs (Welding Required)
Longhorn Fab 200901-UNV-86-HS Traction Bars (Hot Street) 28036 70.00 Longhorn Fab 200901-UNV-86-HS Traction Bars (Hot Street)
$ 632.5
The Longhorn Fab 200901-UNV-86-HS Traction Bars with Hot Street Rod Ends feature a universal fitment and can be installed on a wide range of applications. This kit is the perfect solution to putting traction bars on your truck. Almost all trucks have wheel hop issues right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. This kit includes the upgraded Hot Street Rod Ends available exclusively from Longhorn Fab Shop. This rod end is for the budget conscience racer/sled puller that still wants an upgraded rod end compared to the standard end. This end is designed to have less noise, smoother operation, and provide more strength than the standard grade end. Features: Manufactured In The USA! Includes Hot Street Rod Ends Laser Cut and CNC Bent Brackets Ensure Perfect Fit Completely Adjustable For Suspension Preloading Without Removing Specifications: Grade 8 Hardware Length: 86" (For Long Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Fits Stock Ride Height Up To 12" Suspension Lift
Longhorn Fab 200904 Traction Bar Bracket Kit 28022 19.00 Longhorn Fab 200904 Traction Bar Bracket Kit
$ 251.9
The Longhorn Fab 200904 Traction Bar Bracket Kit allows you to save time and money when building traction bars for your 2001- 2010 GM 6.6L Duramax. These heavy-duty brackets are laser cut and CNC-bent for a perfect fit. Features: All Grade 8 Hardware No Welding Required Installs With Simple Hand Tools Manufactured In The USA! Specifications: 2 Front Brackets 2 Rear Brackets 1.825" Width 3/4" Through Bolts 1/2" Frame Bolts
Longhorn Fab 200904-PG Pro Grade Traction Bar Bracket Kit 28023 22.00 Longhorn Fab 200904-PG Pro Grade Traction Bar Bracket Kit
$ 306.9
The Longhorn Fab 200904-PG Pro Grade Traction Bar Bracket Kit allows you to save time and money when building traction bars for your 2001-2010 GM 6.6L Duramax. These heavy-duty brackets are laser cut and CNC-bent for a perfect fit. The Pro Grade Brackets feature a boxed in design with welded side plates designed to increase strength for the most demanding applications. Features: Pro Grade All Grade 8 Hardware No Welding Required Installs With Simple Hand Tools Manufactured In The USA! Extra Steel Added Where It's Needed Most Specifications: 1.825" Width 3/4" Through Bolts 1/2" Frame Bolts
Longhorn Fab 200904-UNV Universal Traction Bar Bracket Kit 28026 14.00 Longhorn Fab 200904-UNV Universal Traction Bar Bracket Kit
$ 197.99
The Longhorn Fab 200904-UNV Universal Traction Bar Bracket Kit allows you to save time and money when building traction bars for your truck. These heavy-duty brackets are laser cut and CNC-bent for a perfect fit. Welding required for installation. Features: All Grade 8 Hardware Laser Cut and CNC-Bent Manufactured In The USA! Specifications: 1.825" Width 3/4" Through Bolts 1/2" Frame Bolts
Longhorn Fab 200909-LB Pro Grade Traction Bars (Pro Rod Ends) 28028 84.00 Longhorn Fab 200909-LB Pro Grade Traction Bars (Pro Rod Ends)
$ 796.4
The Longhorn Fab 200909-LB Pro Grade Traction Bars with Profesional Grade Rod Ends is specially built for your 2001-2010 GM 6.6L Duramax Long Bed Pickup. Designed as a bolt-on upgrade, these Traction Bars are built using the highest quality hardware and install with just hand tools! Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. This kit includes the professional grade brackets that feature a boxed-in design for extra strength. The increased strength makes these brackets handle anything that you can throw at them. This Traction Bar Kit is a great choice for those who are competing, and pushing the limits of their truck. The other key difference in this kit, is that the Professional Grade Rod Ends are included. Professional Grade Rod Ends feature a durable, high-end race design with Nylon injected, oil impregnated races designed for BAJA trucks and NASCAR. This provides a long, service free, and rattle free life. Features: Manufactured In The USA! Professional Grade Brackets Professional Grade Rod Ends Installs With Basic Hand Tools Laser Cut and CNC Bent Brackets Ensure Perfect Fit NO Welding Or Fabrication Required - Bolt On Kit! Completely Adjustable For Suspension Preloading Without Removing Specifications: Grade 8 Hardware Length: 86" (For Long Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Fits Stock Ride Height Up To 12" Suspension Lift
Longhorn Fab 200909-SB Pro Grade Traction Bars (Pro Rod Ends) 28027 75.00 Longhorn Fab 200909-SB Pro Grade Traction Bars (Pro Rod Ends)
$ 768.9
The Longhorn Fab 200909-SB Pro Grade Traction Bars with Profesional Grade Rod Ends is specially built for your 2001-2010 GM 6.6L Duramax Short Bed Pickup. Designed as a bolt-on upgrade, these Traction Bars are built using the highest quality hardware and install with just hand tools! Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. This kit includes the professional grade brackets that feature a boxed-in design for extra strength. The increased strength makes these brackets handle anything that you can throw at them. This Traction Bar Kit is a great choice for those who are competing, and pushing the limits of their truck. The other key difference in this kit, is that the Professional Grade Rod Ends are included. Professional Grade Rod Ends feature a durable, high-end race design with Nylon injected, oil impregnated races designed for BAJA trucks and NASCAR. This provides a long, service free, and rattle free life. Features: Manufactured In The USA! Professional Grade Brackets Professional Grade Rod Ends Installs With Basic Hand Tools Laser Cut and CNC Bent Brackets Ensure Perfect Fit NO Welding Or Fabrication Required - Bolt On Kit! Completely Adjustable For Suspension Preloading Without Removing Specifications: Grade 8 Hardware Length: 72" (For Short Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Fits Stock Ride Height Up To 12" Suspension Lift
Longhorn Fab 200909-UNV-72 Pro Grade Traction Bars (Pro Rod Ends) 28031 67.00 Longhorn Fab 200909-UNV-72 Pro Grade Traction Bars (Pro Rod Ends)
$ 660
The Longhorn Fab 200909-UNV-72 Pro Grade Traction Bars with Professional Grade Rod Ends are the perfect solution to putting traction bars on your truck. Almost all trucks have wheel hop issues right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. This kit includes the professional grade brackets that feature a boxed-in design for extra strength. The increased strength makes these brackets handle anything that you can throw at them. This Traction Bar Kit is a great choice for those who are competing, and pushing the limits of their truck. The other key difference in this kit, is that the Professional Grade Rod Ends are included. Professional Grade Rod Ends feature a durable, high-end race design with Nylon injected, oil impregnated races designed for BAJA trucks and NASCAR. This provides a long, service free, and rattle free life. Features: Manufactured In The USA! Professional Grade Brackets Professional Grade Rod Ends Laser Cut and CNC Bent Brackets Ensure Perfect Fit Completely Adjustable For Suspension Preloading Without Removing Specifications: Grade 8 Hardware Length: 72" (Fits Most Short Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Fits Stock Ride Height Up To 12" Suspension Lift Note: For universal applications. Rear axle tabs must be welded on.
Longhorn Fab 200909-UNV-86 Pro Grade Traction Bars (Pro Rod Ends) 28032 75.00 Longhorn Fab 200909-UNV-86 Pro Grade Traction Bars (Pro Rod Ends)
$ 687.51
The Longhorn Fab 200909-UNV-86 Pro Grade Traction Bars with Professional Grade Rod Ends are the perfect solution to putting traction bars on your truck. Almost all trucks have wheel hop issues right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, youre not getting traction! Longhorn Fab Shop listened to the demands and created a simple, cost effective solution to the problem. Longhorn Traction Bars are affordable enough for the daily driven truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition youll love the strength, design, adjustability, and ease of installation of the Longhorn Traction Bars. This kit includes the professional grade brackets that feature a boxed-in design for extra strength. The increased strength makes these brackets handle anything that you can throw at them. This Traction Bar Kit is a great choice for those who are competing, and pushing the limits of their truck. The other key difference in this kit, is that the Professional Grade Rod Ends are included. Professional Grade Rod Ends feature a durable, high-end race design with Nylon injected, oil impregnated races designed for BAJA trucks and NASCAR. This provides a long, service free, and rattle free life. Features: Manufactured In The USA! Professional Grade Brackets Professional Grade Rod Ends Laser Cut and CNC Bent Brackets Ensure Perfect Fit Completely Adjustable For Suspension Preloading Without Removing Specifications: Grade 8 Hardware Length: 86" (Fits Most Long Bed Models) Massive 2" Diameter Heavy-Duty Steel Tube Fits Stock Ride Height Up To 12" Suspension Lift Note: For universal applications. Rear axle tabs must be welded on.
TAKE 10% OFF SITEWIDE* WITH OUR VETERANS DAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: VET10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 11/11/19 only.