Airaid Intake System 400-246

PART# 400-246 | SKU AA400-246
★★★★★ ★★★★★ 4.5 (6 Reviews)

Vehicle Fitment For:
1999-2003 Ford 7.3L Powerstroke

See full application list below
Discontinued
Ships directly from the manufacturer
An Email Will Be Sent With Expected Shipping Date After Purchase
FREE Delivery by ,
If you order within hr min
This product cannot be shipped to your destination
Not Shipping to ?
Need it faster?

Description



AIRAID Filter Company has leveled the power playing field for the 7.3L with the development of an all-new Cold Air Dam Intake System for the 7.3-liter that allows the engine to breathe deeper, resulting in big horsepower and torque gains. The new system replaces the restrictive factory air box setup with an AIRAID Cold Air Dam which also incorporates a heavy-duty battery tray, complete with urethane battery pad. At the heart of this system is a HUGE 1700-CFM washable and reusable Premium Air Filter that is available with either SynthaFlow Oiled filtration technology along with a specially shaped intake tube that feeds the Power Stroke turbo inlet.

All AIRAID filters are hand-poured using a special urethane blend that prevents cracking and shrinkage in the most extreme conditions. On the dyno, the new Cold Air Dam Intake System for the 7.3-liter generated an additional 27 horsepower and a whopping 55 lb/ft of torque to the rear wheels at a real-world 1900 rpm, about where most diesel driving is conducted. The system is a must for Power Stroke owners considering other upgrades such as a programmer or chip, and aftermarket exhaust system.

SUPERIOR AIR FLOW AND FILTRATION AT NO EXTRA COST

In terms of filtration, all AIRAID SynthaFlow Premium Filters are a specially-blended combination of gauze and synthetic layers that consistently filter down to two microns, providing superior filtration at no extra cost. AIRAID filters are also hand-poured with urethane, instead of rubber, to prevent cracking and shrinkage in the extreme conditions found under the hood of a turbocharged engine.
 
On the dyno, the new AIRAID Cold Air Dam Intake System, p/n 400-246 for the 7.3-liter generated an additional 27 horsepower and a whopping 55 lb/ft of torque to the rear wheels at a real-world 1900 rpm, about where most diesel driving is conducted. The system is a must for Power Stroke owners considering other upgrades such as aprogrammer or chip, and aftermarket exhaust system.
 
And as is the case with all AIRAID products, the Power Stroke Intake System comes with our No Hassle Warranty.

Instructions & Tech Info

Reviews For Airaid Intake Systems 400-246

Overall Rating
4.5/5
6 Reviews
Rating Snapshot
5 ★
5
4 ★
0
3 ★
0
2 ★
1
1 ★
0
Verified Buyer
★★★★★ ★★★★★
Poor packing/shipping
John (Florida) | November 25th, 2023
Box arrived best to hell (Shippers fault) but at least it was still sealed. The issue is my intake kit I ordered was missing the insulation gasket that goes on top of the shield and the stamped shield pieces were damage, I'm assuming during shipping. But regardless it could have been packed better with all east some protection inside. Everything was loose bouncing around and got damaged. Disappointing considering how much this cost compared to others.
 
★★★★★ ★★★★★
Airaid intake
Scott (Washington) | July 16th, 2020
Went in smoothly. Immediately felt the difference as soon as I went down the street. Exhaust is louder turbo sounds better. Love it !
 
★★★★★ ★★★★★
Wow #898535
El (Nyc) | November 5th, 2018
Omg what a difference my truck feels like a new truck I put this on my super duty 99 and let me tell you what a difference
 
★★★★★ ★★★★★
Brian Pierce, R.I
BrianPierce (Unknown) | January 25th, 2007
The install on the intake was pretty easy and only took about an hour. It sounds sweet and the you can really hear the turbo. I have a 99.5 7.3L F350 with the bulley dog 6 position chip, mbrp 4 inch turbo back, and the intake goes very nicely with the set up. You can definitly feel the difference once you put it to the floor. I highly recommend it to anyone.
 
★★★★★ ★★★★★
Works well
Robert (Huntsville AL) | September 6th, 2011
I put it on a 2000 7.3L F250. Install was easy, the truck runs better with it on there. I would recommend a chip to assist with the turbo.
 
★★★★★ ★★★★★
VERY high quality
Chris McDaniel (Richmond,VA) | May 19th, 2012
Well engineered system.Actually included all of the hardware needed to install.NO trimming or tweaking of any of the brackets was necessary to install system.Very easy to install,took about 45 minutes start to finish.Truck definitely feels like it has more bottom end.Have not had it installed long enough to see if fuel mileage has improved.Also,the size of the filter is massive in comparison to the other intakes on the market.Would highly recommend this product to anyone.
Write a Review

Review this product and help other XDP customers make informed decisions!

Overall Rating
Your Information

Frequently Asked Questions

Does this fit an early 1999? Manuf date 08-98

Yes, the Airaid Intake System 400-246 will fit both early and late 99 trucks.

Ask A Question
Ask a question about this product
Please allow up to 1 business day for reply.

More to Consider

Specifications For Airaid Intake Systems 400-246

MPN 400-246
SKU AA400-246
GTIN 642046402464
ID 1566
Manufacturer Name Airaid Intake Systems
Shipping Weight 21.00 lb.
Shipping Length 20 in.
Shipping Width 20 in.
Shipping Height 12 in.
Fuel Type Diesel
E-Code 2
EO Number d-609-18
Filter Media Oiled
Filter Type Washable & Reusable
Intake Style Open Air Box
Prop 65 Prop 65 WarningWARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
Internal L0R0

Recently Viewed

ITEM ADDED TO CART

Complete the job with these highly suggested add-on products.

Product prices marked with an * may require additonal fees, such as a core charge, which will be displayed in the cart.