Products Showing Parts for — {{ }}

No Results Showing Parts for — {{ }}
USD 691.16
Part #: AFE46-20144-B

AFE 46-20144-B BladeRunner Intercooler Pipe Kit

2011-2016 Ford 6.7L Powerstroke (Hot & Cold Side)
Part #: AFE46-20144-B
★★★★★ ★★★★★ 4 Reviews
Buy now, pay later using Affirm Logo during checkout.
Temporarily Out of stock - More on the way!

An Email Will Be Sent With Expected Shipping Date After Purchase

Our Recommendations Compatible Products
Scroll to View More


The AFE 46-20144-B BladeRunner Intercooler Pipe Kit for your 2011-2016 Ford 6.7L Powerstroke makes it easy to upgrade the intercooler pipes in your truck. This kit includes both the hot and cold side intercooler pipes and outflows your factory components by up to 32%! 

Flow and Performance:
The intercooler tubes are constructed of 3" mandrel bent aluminum tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The smooth bends and larger diameter tubing allow for low turbulence, increasing horsepower, torque and lowering EGTs.

Installation is a snap:
Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes heavy-duty 5-PLY couplings and high quality stainless steel spring loaded T-bolt clamps for strength. The tubes also come equipped with two billet aluminum factory style quick connect adapters that works with the OEM intercooler. 

aFe Badging:
Unique laser-cut aFe Power logo plates are welded-on for an aggressive style

  • Bolt-On Kit Fits With OEM Intercooler 
  • Outflows Stock Intercooler Tubes Up To 32%
  • Increased Horsepower & Torque: 8HP & 21TQ
  • Constructed From 3" Mandrel-Bent Aluminum Tubing
  • Replacement Tubes For Both Hot & Cold Side Of Intercooler
  • Powder-Coated Wrinkle-Black For Heat Resistance & Long-Life
  • Includes High-Quality Stainless Steel Spring Loaded T-Bolt Clamps
  • Incorporates Two Billet Aluminum, Factory-Style Quick-Connects For Secure Installation
  • Couplings Constructed From Heavy-Duty High-Temp 5-PLY Polyester For Heat-Resistance & Durability
Shipping Restrictions Apply shipping restriction icon This product can not be shipped to these states: CA

Vehicle Applications

2011 Ford 6.7L Powerstroke
2012 Ford 6.7L Powerstroke
2013 Ford 6.7L Powerstroke
2014 Ford 6.7L Powerstroke
2015 Ford 6.7L Powerstroke
2016 Ford 6.7L Powerstroke


  • MFG. Number 46-20144-B
  • Manufacturer Name AFE
  • Shipping Weight 11.00 lb.
  • Shipping Length 18 in.
  • Shipping Width 13 in.
  • Shipping Height 13 in.
  • Fuel Type Diesel
  • E-Code 4
  • UPC 802959463963
  • Warranty Yes
  • Warranty Info 2 Year Limited
  • Prop 65 Prop 65 WarningWARNING: Cancer & Reproductive Harm -
  • Internal L0.00R0.00


★★★★★ ★★★★★
4.8/5 Stars out of 4 Reviews
Very easy install, takes about 15 min. My factory cold side plastic cracked with 77k on my f250. I never pull anything heavier than a bass boat (never thought I would have issues with this). Now looking over the old pipes vs the new, I feel very confident these tubes will not fail, AFE did a very nice job with this set. Extremely happy with my purchase.
Verified Buyer
6.7 intercooler upgrades
Order number #1612241A Ok i had the same issue that all the 6.7 have low pressure boot blew off. So i ordered the AFE Blade runner kit to do both the hot and cold sides. They came in pretty reasonable time and man where they boxed really well. Installing is not that big of a problem i would say a medium, on skill level. It took about 30 minutes to install, i would recommend laying the new boots out in the sun to soften up first, make sure to relocate the power steering reservoir for added room. The hot side is a bit tuff to get the factory clip off ,but reinstall was a quick breeze. The blade runner kit is the only one that i found that seels together, it was priced about all the same though, hope they work well with the pair.
Not bad overall.
AFE 46-20144-B BladeRunner Intercooler Pipe Kit, I ordered this kit as my stock cold side was broken. I am happy with the outcome, Directions could have had more details on some areas. Then I am disappointed that the AFE metal Name plate that is spot welded came off on the installation of the cold tube. So it does make me wander how well this will hold up. Guess we will find out as I just installed this past weekend and not had much chance to try it out yet.
Pages 1   2

Write a Review

Include Your Order Number For a Chance to Win a $100 Gift card

Overall Rating

Your Information

Email Address will not be made public.

Questions and Answers

If I am buying the afe blade runner kit does it include boots or do I also need to purchase the boot kit?
View Staff Answer 
The AFE 46-20144-B BladeRunner Intercooler Pipe Kit will include the couplings needed for installation. This kit will also use the factory style quick connect adapters to fit your OE intercooler.
What is the port on it for? Methanol injection?
View Staff Answer 
The port on the AFE 46-20144-B BladeRunner Intercooler Pipe Kit could be used for water methanol injection, nitrous or to read boost.

Ask a question about this product

Please allow up to 1 business day for reply.

More to Consider

Recently Viewed