The AirDog A4SPBD105 FP-150-4G Air/Fuel Separation System from XDP improves the fuel system on your 2004.5-2018 Dodge 5.9L/6.7L Diesel (Moderate To Extreme). This system was created by AirDog to remove water, pollutants, vapor, and entrained air from diesel fuel. This lift pump and filter system is necessary to provide a steady flow of clean fuel to your engine. This AirDog system combines their traditional non-adjustable/high flow return base with the 4G motor they have been utilizing for years with great success. By maintaining this basic architecture, AirDog is able to offer a cost-effective system with a tried-and-true and reliable motor design.
The AirDog functions by drawing fuel from the fuel tank which contains entrained air/vapor, particle contaminants, and unidentified amounts of moisture. When the fuel passes through the water separator, water and large particle impurities are taken out of it. The fuel then reaches the fuel pump with the remaining entrained pollutants, air/vapor, and water. While the fuel passes through the fuel filter under positive pressure, the leftover particle pollutants are retained. The entrained air and vapor are separated and added back to the tank. The right pressures are then used to supply the clean fuel to your engine. Each kit includes all the plumbing, hardware, wiring, mounting brackets, and other installation-related parts needed.
If you update the components and performance of your diesel engine, it needs better fuel flow. Higher fuel flows cause more agitation in the fuel tank and vacuum at the fuel pump. This decreases the performance of the engine by allowing more air and moisture to enter the fuel system. Air and vapor can also cause galling, pitting, and tip erosion in injector barrel/plunger assemblies. The AirDog removes air from the fuel to prevent long-term damage to your injectors and improper operation of your engine. The AirDog also provides the fuel pressures and flows required for your diesel engine to run as efficiently as possible.
Features:
- 150 GPH Fuel Pump
- Faster Throttle Response
- Better Engine Performance
- Separates Air & Water From Fuel
- Includes Frame Mounting Bracket
- Features Reliable 4G Motor Design
- Increases Overall Engine Efficiency
- All Necessary Wiring, Plumbing, & Installation Hardware Included
Kit Includes:
AirDog Lift Pump
AirDog Cradle Bracket
Frame Bracket Set
Mounting Bracket Hardware
Spacer Block
Wiring Harness
High Flow Suction Tube
1.5” Filler Neck Tee with Clamps
20ft of Fuel Line
1/2” Straight Hose Quick Connect Fitting
(2) 1/2” 90deg Hose Quick Connect Fitting
(3) 1/2” Male Quick Connect x 3/4-16 UNF ORB
12mm x 1/2” Male SAE J2044 Injection Pump Fitting
12mm Sealing Washer
Zip/Cable Tie Bundle
O-Ring Kit
Vacuum Cap HVC-467-16
Vacuum Cap Hose Clamp
WARRANTY INFO:
Limited Lifetime
Disclaimer: XDP is in no way affiliated with Cummins or any of its subsidiaries or related companies, and that Cummins has not authorized the sale of any of XDP's parts, and has not tested or approved any of XDP’s parts for use in genuine Cummins brand products.