Beans Diesel 280003 Multi-Function Fuel Tank Sump

The Beans Diesel 280003 Multi-Function Fuel Tank Sump is a quick and easy way to get the most amount of fuel for your diesel-powered vehicle. By pulling fuel from the bottom of the tank rather than the top, you take a lot of strain off the fuel pump, allowing it to operate much quieter and you will never have to worry about quarter tank issues again. Another added bonus to the Beans Diesel Bean Machine fuel sump, is the simple fact that you no longer need to drop the fuel tank to install your aftermarket fuel system. You simply drill a hole in the bottom of the tank, clean out any shavings and install the sump. Minimal tools are required and it shaves about hours off your install time.

This fuel tank sump is made from single piece of 6061 Billet aluminum for strength and utilizes an O-ring Boss style fitting instead of a pipe thread style fitting to minimize the potential for leaks. The single O-ring design creates the perfect seal insuring you have zero leaks. A single bolt and a 3” hole is required for installation with a 3” hole saw and mounting bolt being included in this sump kit. In addition, the Beans Diesel 280003 Multi-Function Fuel Tank Sump includes a whole host of aluminum fittings; such as 1/2" push-lock, 3/8” push-lock, and 5/8" push-lock fittings found on most aftermarket fuel systems as well as  1/2" single outlet plug if you only need a single outlet style pump. This sump includes a drain plug that allows for servicing of the tank or sediment draining and includes stainless-steel hardware for longevity.