Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Aeromotive 11802 130GPH Fuel Pump (Pump Only) 26825 20.00 Aeromotive 11802 130GPH Fuel Pump (Pump Only)
$ 1062.59
The Aeromotive 11802 Fuel Pump offers a true solution to Duramax, Cummins and Powerstroke owners looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel Pump addresses the common failure points and issues that have plagued the market for years. Filtration: The Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue. Shaft Seals and Pump Design: Like all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump. Extreme Climates: Aeromotive understands that some need their trucks in harsh environments. For the extreme cold, the Aeromotive 11802 features (2) 8-AN ports to allow engine coolant to warm the pump body. In addition, the pump is a completely sealed unit allowing it to get wet or be submerged without skipping a beat. Fuel Pressure: Unlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. The 11802 also comes standard with a pump mounted gauge so you can refine your pressure tuning without having to guess. Features: 130 GPH @ 10 PSI Pump Only (No Installation Kit) Ideal For Custom Applications Note: Quick-Connect fittings shown installed in pump are for display only. Pump fittings and installation kit are not included.
AirDog A4SPBD000 100GPH Air/Fuel Separation System 27406 27.00 AirDog A4SPBD000 100GPH Air/Fuel Separation System
5 5 1
$ 599
The PureFlow AirDog A4SPBD000 100GPH Air/Fuel Separation System for your 1994-1998 Dodge 5.9L Cummins provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel. The AirDog is lift pump and filter system, that enhances the fuel delivery to your engine with a commercial duty system. Your high performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air/vapor can cause galling and pitting of the injector barrel/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time! The Airdog works by pulling fuel from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation. Features: 100 GPH @ 25-30 PSI (Stock-500HP) Removes Air and Water From Fuel Increased Horsepower and Torque Optimized Engine Performance Improved Throttle Response Increased Fuel Economy Lifetime Limited Express Warranty
AirDog A4SPBD003 150GPH Air/Fuel Separation System 27415 27.00 AirDog A4SPBD003 150GPH Air/Fuel Separation System
$ 599
The PureFlow AirDog A4SPBD003 150GPH Air/Fuel Separation System for your 1994-1998 Dodge 5.9L Cummins provides the most effective technology designed specifically to remove water, particulates, vapor and entrained air from the diesel fuel in your truck. The AirDog is a lift pump and filtration system, that enhances the fuel delivery to your engine with a commercial duty system. Your high performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air/vapor in the fuel system preventing your engine from producing maximum power and efficiency. Additionally, air/vapor can cause galling and pitting of the injector barrel/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time! The Airdog works by pulling fuel from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation. Features: 150 GPH @ 25-30 PSI (Stock-800HP) Removes Air and Water From Fuel Increased Horsepower and Torque Optimized Engine Performance Improved Throttle Response Increased Fuel Economy Lifetime Limited Express Warranty
AirDog II-4G A6SABD027 DF-200-4G Air/Fuel Separation System 30651 27.00 AirDog II-4G A6SABD027 DF-200-4G Air/Fuel Separation System
$ 769
The PureFlow AirDog II-4G A6SABD027 DF-200-4G Air/Fuel Separation System for your 1994-1998 Dodge 5.9L Cummins is the next generation in the fuel delivery system, resulting in a long lasting, efficient and quiet lift pump. The compact AirDog II-4G provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel, all while increasing power and performance. The design of the patented AirDog II-4G features many innovative improvements for increased pump performance, less noise and less maintenance. The AirDog II-4G utilizes an intermediate pump shaft that moves the electric motor away from the fuel. This eliminates any potential for wet motors due to a damaged or leaking seal. The motors self-aligning capability requires less maintenance and increases the systems endurance resulting in a longer pump life. The low amperage motor also provides longer drivability and contributes to a significant reduction in noise. AirDog® is proud to announce that the AirDog II-4G® is the quietest fuel system in the diesel market! Features: Preset @ 25-30 PSI Supports 800HP+ Flows 200 Gallons Per Hour Improved Throttle Response Smoother Idle and Acceleration
AirDog II-4G A6SABD424 DF-165-4G Air/Fuel Separation System 24692 27.00 AirDog II-4G A6SABD424 DF-165-4G Air/Fuel Separation System
$ 739
The PureFlow AirDog II-4G A6SABD424 DF-165-4G Air/Fuel Separation System for your 1994-1998 Dodge 5.9L Cummins is the next generation in the fuel delivery system, resulting in a long lasting, efficient and quiet lift pump. The compact AirDog II-4G provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel, all while increasing power and performance. The design of the patented AirDog II-4G features many innovative improvements for increased pump performance, less noise and less maintenance. The AirDog II-4G utilizes an intermediate pump shaft that moves the electric motor away from the fuel. This eliminates any potential for wet motors due to a damaged or leaking seal. The motors self-aligning capability requires less maintenance and increases the systems endurance resulting in a longer pump life. The low amperage motor also provides longer drivability and contributes to a significant reduction in noise. AirDogĀ® is proud to announce that the AirDog II-4GĀ® is the quietest fuel system in the diesel market! Features: Preset @ 25-30 PSI Supports 500HP-800HP Flows 165 Gallons Per Hour Improved Throttle Response Smoother Idle and Acceleration
AirDog II-4G A6SPBD252 DF-100-4G Air/Fuel Separation System 30659 27.00 AirDog II-4G A6SPBD252 DF-100-4G Air/Fuel Separation System
$ 699
The PureFlow AirDog II-4G A6SPBD252 DF-100-4G Air/Fuel Separation System for your 1994-1998 Dodge 5.9L Cummins is the next generation in the fuel delivery system, resulting in a long lasting, efficient and quiet lift pump. The compact AirDog II-4G provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel, all while increasing power and performance. The design of the patented AirDog II-4G features many innovative improvements for increased pump performance, less noise and less maintenance. The AirDog II-4G utilizes an intermediate pump shaft that moves the electric motor away from the fuel. This eliminates any potential for wet motors due to a damaged or leaking seal. The motors self-aligning capability requires less maintenance and increases the systems endurance resulting in a longer pump life. The low amperage motor also provides longer drivability and contributes to a significant reduction in noise. AirDog® is proud to announce that the AirDog II-4G® is the quietest fuel system in the diesel market! Features: Preset @ 25-30 PSI Supports Stock-500HP Flows 100 Gallons Per Hour Improved Throttle Response Smoother Idle and Acceleration
AirDog R4SBD048 Raptor 4G 100GPH Pump 33640 17.00 AirDog R4SBD048 Raptor 4G 100GPH Pump
$ 439
Upgrade the fuel system in your 1994-1998 Dodge 5.9L Cummins with the PureFlow AirDog R4SBD048 Raptor 4G 100GPH Pump. The Raptor 4G improves fuel flow giving you the ability to support fuel system upgrades and other engine modifications. Using AirDog's 4G technology, this pump features a 4-bearing motor design with an intermediate shaft. This allows for self-alignment of the gerotor resulting in lower amp loads on the motor, while providing you with a quiet, long lasting, dependable fuel pump. Each kit includes plumbing, hardware, and required components for installation. Features: 100 GPH 4G Technology Gerotor Pump Design No Return Line Needed Lifetime Limited Express Warranty Built-In Adjustable Regulator (Preset @ 25-30 PSI)
AirDog R4SBD051 Raptor 4G 150GPH Pump 33643 17.00 AirDog R4SBD051 Raptor 4G 150GPH Pump
$ 455
Upgrade the fuel system in your 1994-1998 Dodge 5.9L Cummins with the PureFlow AirDog R4SBD051 Raptor 4G 150GPH Pump. The Raptor 4G improves fuel flow giving you the ability to support fuel system upgrades and other engine modifications. Using AirDog's 4G technology, this pump features a 4-bearing motor design with an intermediate shaft. This allows for self-alignment of the gerotor resulting in lower amp loads on the motor, while providing you with a quiet, long lasting, dependable fuel pump. Each kit includes plumbing, hardware, and required components for installation. Features: 150 GPH 4G Technology Gerotor Pump Design No Return Line Needed Lifetime Limited Express Warranty Built-In Adjustable Regulator (Preset @ 25-30 PSI)
AirDog R4SPBF359 Raptor 4G 150GPH Pump 33635 10.00 AirDog R4SPBF359 Raptor 4G 150GPH Pump
$ 485
Upgrade the fuel system in your 1994-1998 Dodge 5.9L Cummins with the PureFlow AirDog R4SPBF359 Raptor 4G 150GPH Pump. The Raptor 4G improves fuel flow giving you the ability to support fuel system upgrades and other engine modifications. Using AirDog's 4G technology, this pump features a 4-bearing motor design with an intermediate shaft. This allows for self-alignment of the gerotor resulting in lower amp loads on the motor, while providing you with a quiet, long lasting, dependable fuel pump. Each kit includes plumbing, hardware, and required components for installation. Features: 150 GPH 4G Technology Gerotor Pump Design No Return Line Needed Lifetime Limited Express Warranty Built-In Adjustable Regulator (Preset @ 25-30 PSI) High Pressure Pump - Can Supply Higher Pressure
FASS FA D10 125G Adjustable 125GPH Fuel Pump 27317 20.10 FASS FA D10 125G Adjustable 125GPH Fuel Pump
$ 588.05
The FASS FA D10 125G Adjustable 125GPH Fuel Pump for your 1994-1998 Dodge 5.9L Cummins is designed to be the most versatile high performance fuel pump on the market that allows for adjustable fuel pressures to meet the demand of high performance Dodge Cummins 12 Valve applications. Manufactured with the same motor used in the FASS Titanium Series pumps, this adjustable fuel pump is rated at 125 gallons of diesel fuel per hour and offers adjustable fuel pressure from 1-75 PSI to customize fuel delivery for race or competition diesel engines. To aid in proper performance we built in a boost compensation port, air pressure from your intake manifold raises fuel pressures while under full throttle, maintaining fuel pressure when it matters most. Features: Improves Fuel Flow Built-In Boost Compensation Port Adjustable Fuel Pressure 1-75 PSI Built-In Fuel Pressure Gauge Port 125 GPH @45 PSI - Moderate To Extreme Engines
FASS FA D10 220G Adjustable 220GPH Fuel Pump 10840 10.00 FASS FA D10 220G Adjustable 220GPH Fuel Pump
$ 683.05
The FASS FA D10 220G Adjustable 220GPH Fuel Pump for your 1994-1998 Dodge 5.9L Cummins is designed to be the most versatile high performance fuel pump on the market that allows for adjustable fuel pressures to meet the demand of high performance applications. Manufactured with the same motor used in the FASS Titanium Series pumps, this adjustable fuel pump is rated at 220 gallons of diesel fuel per hour and offers adjustable fuel pressure from 1-75 PSI to customize fuel delivery for race or competition diesel engines. To aid in proper performance we built in a boost compensation port, air pressure from your intake manifold raises fuel pressures while under full throttle, maintaining fuel pressure when it matters most. This kit includes a FASS STK-1002 (Bulkhead and Suction Tube Kit). Machined from 6061 T-6 Billet Aluminum, the Bulkhead fitting functions as both a suction tube and return and features a 5/8 Suction Tube along with a ½ Fuel Return Port. The specially designed Suction Tube Kit allows you plumb the FASS return line directly to the bulkhead fitting, eliminating all cutting of the filler neck, and significantly speeding up the installation process. The pickup tube is fabricated of PTFE Teflon which can be easily cut to adapt to different depth of fuel tanks. Properly installed, you can safely operate down to about 1/8 tank of fuel. Features: Improves Fuel Flow Built-In Boost Compensation Port Adjustable Fuel Pressure 1-75 PSI Built-In Fuel Pressure Gauge Port 220GPH - For Super Extreme Engine (900HP-1200HP)
FASS FA D10 240G Adjustable 240GPH Fuel Pump 27328 10.00 FASS FA D10 240G Adjustable 240GPH Fuel Pump
$ 730.55
The FASS FA D10 240G Adjustable 240GPH Fuel Pump for your 1994-1998 Dodge 5.9L Cummins is designed to be the most versatile high performance fuel pump on the market that allows for adjustable fuel pressures to meet the demand of high performance applications. Manufactured with the same motor used in the FASS Titanium Series pumps, this adjustable fuel pump is rated at 240 gallons of diesel fuel per hour and offers adjustable fuel pressure from 1-75 PSI to customize fuel delivery for race or competition diesel engines. To aid in proper performance we built in a boost compensation port, air pressure from your intake manifold raises fuel pressures while under full throttle, maintaining fuel pressure when it matters most. This kit includes a FASS STK-1002 (Bulkhead and Suction Tube Kit). Machined from 6061 T-6 Billet Aluminum, the Bulkhead fitting functions as both a suction tube and return and features a 5/8 Suction Tube along with a ½ Fuel Return Port. The specially designed Suction Tube Kit allows you plumb the FASS return line directly to the bulkhead fitting, eliminating all cutting of the filler neck, and significantly speeding up the installation process. The pickup tube is fabricated of PTFE Teflon which can be easily cut to adapt to different depth of fuel tanks. Properly installed, you can safely operate down to about 1/8 tank of fuel. Features: Improves Fuel Flow Built-In Boost Compensation Port Adjustable Fuel Pressure 1-75 PSI Built-In Fuel Pressure Gauge Port 240GPH - For Highly Modified Engines (1200HP-1500HP)
FASS TS D10 125G Titanium Signature Series 125GPH Fuel System 34400 32.00 FASS TS D10 125G Titanium Signature Series 125GPH Fuel System
$ 801.8
The FASS TS D10 125G Titanium Signature Series 125GPH Fuel System with Whisper Technology is engineered to be the top performing, longest lasting and most reliable aftermarket filtration system on the market for your 1994-1998 Dodge 5.9L Cummins. Rated at 125 gallons per hour and backed by a limited lifetime warranty, the Titanium Signature Series offers advanced filtration that will help protect your Cummins fuel injection system, effectively extending the life of your Injection Pump and Injectors. These benefits include: improved filtration rating of 3 Microns, a built in water separation filter and FASS Fuel Systems patented air/vapor removal process. For stock to moderate engines (Stock-600HP) Titanium Signature Series With over 2.5 years in the making, FASS has done extensive testing, research, and manufacturing on their Signature Series Fuel Systems. Featuring the FASS Whisper Technology specially designed to decrease pump noise, improve pump life, improve flow rate, and increase overall pump performance, the Signature Series provides you with the most reliable aftermarket fuel system in the industry. FASS Silencing Technology (FST)Developed by the engineering team at FASS Fuel Systems to help reduce the noise created by aftermarket fuel and air separation systems. By using radius cuts, tighter tolerances on all gears and a high quality military Specd Coating over the aluminum base, FASS Fuel Systems is able to develop the quietest fuel air separation system on the market.Performance Radius Cuts (PRC)An advanced machining technique used to improve the flow of fuel through the pump by creating smooth flowing cuts within the aluminum housing. This prevents the reintroduction of air and vapor back into the fuel and also to prevent stagnant fuel pockets from forming within the corner of a 90 degree bend. FASS Titanium Signature Series Fuel Pumps are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts, lesser competitors commonly use T-Bone and square 90 degree fittings that can limit fuel flow, cause restrictions and reintroduce air back into your fuel.Mass Flow Return (MFR)Technology is used to continually polish your fuel by keeping a positive pressure on the fuel being delivered to the engine and returning the fuel, that's not yet needed, back to the tank after it has been passed through the filtration process, removing dirt, air, vapor and water. This means your fuel is constantly being moved and cleaned. This guarantees that your truck always has the freshest and cleanest fuel possible.Bolt On Bracket MountsOld mounting styles required drilling or welding when mounting your pump. This has been simplified with the FASS bolt on brackets that utilize your factory bed bolt that secures your truck bed to the frame. Mounting the Titanium Signature Series Pump takes only minutes and all brackets are made from machined steel for durability, support and strength. Features:125GPH @ 45 PSI Whisper Technology 3 Micron Filtration Rating30K Mile Filter Life ExpectancyIncreases Efficiency, Performance and Smoother Idle Optional Electric Heater and Fuel Pressure Gauge PortProtects and Extends The Life Of Your Fuel System and Injectors
FASS TS D10 240G Titanium Signature Series 240GPH Fuel System 34600 32.00 FASS TS D10 240G Titanium Signature Series 240GPH Fuel System
$ 858.8
The FASS TS D10 240G Titanium Signature Series 240GPH Fuel System with Whisper Technology is engineered to be the top performing, longest lasting and most reliable aftermarket filtration system on the market for your 1994-1998 Dodge 5.9L Cummins. Rated at 240 gallons per hour and backed by a limited lifetime warranty, the Titanium Signature Series offers advanced filtration that will help protect your Cummins fuel injection system, effectively extending the life of your Injection Pump and Injectors. These benefits include: improved filtration rating of 3 Microns, a built in water separation filter and FASS Fuel Systems patented air/vapor removal process. For use on extreme applications. Titanium Signature Series With over 2.5 years in the making, FASS has done extensive testing, research, and manufacturing on their Signature Series Fuel Systems. Featuring the FASS Whisper Technology specially designed to decrease pump noise, improve pump life, improve flow rate, and increase overall pump performance, the Signature Series provides you with the most reliable aftermarket fuel system in the industry. FASS Silencing Technology (FST)Developed by the engineering team at FASS Fuel Systems to help reduce the noise created by aftermarket fuel and air separation systems. By using radius cuts, tighter tolerances on all gears and a high quality military Specd Coating over the aluminum base, FASS Fuel Systems is able to develop the quietest fuel air separation system on the market.Performance Radius Cuts (PRC)An advanced machining technique used to improve the flow of fuel through the pump by creating smooth flowing cuts within the aluminum housing. This prevents the reintroduction of air and vapor back into the fuel and also to prevent stagnant fuel pockets from forming within the corner of a 90 degree bend. FASS Titanium Signature Series Fuel Pumps are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts, lesser competitors commonly use T-Bone and square 90 degree fittings that can limit fuel flow, cause restrictions and reintroduce air back into your fuel.Mass Flow Return (MFR)Technology is used to continually "polish" your fuel by keeping a positive pressure on the fuel being delivered to the engine and returning the fuel, that's not yet needed, back to the tank after it has been passed through the filtration process, removing dirt, air, vapor and water. This means your fuel is constantly being moved and cleaned. This guarantees that your truck always has the freshest and cleanest fuel possible.Bolt On Bracket MountsOld mounting styles required drilling or welding when mounting your pump. This has been simplified with the FASS bolt on brackets that utilize your factory bed bolt that secures your truck bed to the frame. Mounting the Titanium Signature Series Pump takes only minutes and all brackets are made from machined steel for durability, support and strength. Features:240GPH @ 45 PSI Whisper Technology 3 Micron Filtration Rating30K Mile Filter Life ExpectancyIncreases Efficiency, Performance and Smoother Idle Optional Electric Heater and Fuel Pressure Gauge PortProtects and Extends The Life Of Your Fuel System and Injectors
FASS TS D10 260G Titanium Signature Series 260GPH Fuel System 35538 20.00 FASS TS D10 260G Titanium Signature Series 260GPH Fuel System
$ 906.3
The FASS TS D10 260G Titanium Signature Series 260GPH Fuel System with Whisper Technology is engineered to be the top performing, longest lasting and most reliable aftermarket filtration system on the market for your 1994-1998 Dodge 5.9L Cummins. Rated at 260 gallons per hour and backed by a limited lifetime warranty, the Titanium Signature Series offers advanced filtration that will help protect your Cummins fuel injection system, effectively extending the life of your Injection Pump and Injectors. These benefits include: improved filtration rating of 3 Microns, a built in water separation filter and FASS Fuel Systems patented air/vapor removal process. For use on extreme or racing applications. Titanium Signature Series With over 2.5 years in the making, FASS has done extensive testing, research, and manufacturing on their Signature Series Fuel Systems. Featuring the FASS Whisper Technology specially designed to decrease pump noise, improve pump life, improve flow rate, and increase overall pump performance, the Signature Series provides you with the most reliable aftermarket fuel system in the industry. FASS Silencing Technology (FST)Developed by the engineering team at FASS Fuel Systems to help reduce the noise created by aftermarket fuel and air separation systems. By using radius cuts, tighter tolerances on all gears and a high quality military Specd Coating over the aluminum base, FASS Fuel Systems is able to develop the quietest fuel air separation system on the market.Performance Radius Cuts (PRC)An advanced machining technique used to improve the flow of fuel through the pump by creating smooth flowing cuts within the aluminum housing. This prevents the reintroduction of air and vapor back into the fuel and also to prevent stagnant fuel pockets from forming within the corner of a 90 degree bend. FASS Titanium Signature Series Fuel Pumps are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts, lesser competitors commonly use T-Bone and square 90 degree fittings that can limit fuel flow, cause restrictions and reintroduce air back into your fuel.Mass Flow Return (MFR)Technology is used to continually "polish" your fuel by keeping a positive pressure on the fuel being delivered to the engine and returning the fuel, that's not yet needed, back to the tank after it has been passed through the filtration process, removing dirt, air, vapor and water. This means your fuel is constantly being moved and cleaned. This guarantees that your truck always has the freshest and cleanest fuel possible.Bolt On Bracket MountsOld mounting styles required drilling or welding when mounting your pump. This has been simplified with the FASS bolt on brackets that utilize your factory bed bolt that secures your truck bed to the frame. Mounting the Titanium Signature Series Pump takes only minutes and all brackets are made from machined steel for durability, support and strength. Features:260GPH @ 45 PSI Whisper Technology 3 Micron Filtration Rating30K Mile Filter Life ExpectancyIncreases Efficiency, Performance and Smoother Idle Optional Electric Heater and Fuel Pressure Gauge PortProtects and Extends The Life Of Your Fuel System and Injectors
Fuelab 10305 Velocity 100 In-Line Lift Pump 30231 3.60 Fuelab 10305 Velocity 100 In-Line Lift Pump
$ 504
The Fuelab 10305 Velocity 100 In-Line Lift Pump brings cutting edge fuel system technology to your 1994-1998 Dodge 5.9L Cummins. Fuelab is proud to offer all the great features of the brushless technology fuel pumps in a stand alone unit designed for the diesel performance market. Build your fuel system around the most advanced fuel pump on the planet! Lift Pump Features: 100 GPH Diesel fuel compatible Internal bypass at 35psi High efficiency sling vane positive displacement pump Special housing shape for extremely quiet operation and steady pressure Carbon 9-vane construction with pressure balanced rotor for high reliability Replaceable or cleanable filter element Backed by a 2-year limited warranty Motor Features: Lightweight super-efficient DC brushless motor reduces current draw Low mass rotor for high speed reaction to changes in speed and flow Powerful high flux density Neodymium rare earth magnets No motor brushes to wear out or corrode (low-Sulfur diesel, no problem) Wet motor design, no dynamic shaft seals that can wear out Electronic Features: 12 to 16 volt vehicle electrical system compatibility Continuous dutymotor Construction Features Compact, lightweight design Billet Aluminum Construction with anodize per MIL-A-8625, Type II High quality mounting brackets Long-life, multi-fuel compatible Fluorosilicone static seals Accepts standard or port style 10AN fittings Note: Includes pump only. Installation kits are not included or offered. This pump is intended for more of a custom installation by the end user.
Fuelab Velocity 200 In-Line Lift Pump 10302 16464 3.60 Fuelab Velocity 200 In-Line Lift Pump 10302
$ 539.7
The Fuelab Velocity 200 In-Line Lift Pump 10302 brings you cutting edge fuel system technology. Fuelab is proud to offer all the great features of our brushless technology fuel pumps in a stand alone unit designed for the diesel performance market. Build your fuel system around the most advanced fuel pump on the planet! Lift Pump Features: 200 GPH Diesel fuel compatible MUST BE USED WITH BYPASS REGULATOR High efficiency sling vane positive displacement pump Special housing shape for extremely quiet operation and steady pressure Carbon 9-vane construction with pressure balanced rotor for high reliability Backed by a 2-year limited warranty Motor Features: Lightweight super-efficient DC brushless motor reduces current draw Powerful high flux density Neodymium rare earth magnets Low mass rotor for high speed reaction to changes in speed and flow No motor brushes to wear out or corrode (low-Sulfur diesel, no problem) Wet motor design, no dynamic shaft seals that can wear out Electronic Features: Internal Speed control for variable flow operation 12 to 16 volt vehicle electrical system compatibility Accepts PWM input for speed control Continuous dutymotor speed can be adjusted for appropriate demand Construction Features: Compact, lightweight design, less than 3 lbs, overall length 6.9", diameter 2.63" Billet Aluminum Construction with anodize per MIL-A-8625, Type II High quality mounting brackets included Long-life, multi-fuel compatible Fluorosilicone static seals Accepts standard or port style 10AN fittings Application Note: This universal pump can be used as a replacement with the Fuelab Vortex Air Separator. If used on a standalone application, a bypass regulator is REQUIRED.
Longhorn Fab 201050 Universal FASS & AirDog Skid Plate Mount 34573 14.00 Longhorn Fab 201050 Universal FASS & AirDog Skid Plate Mount
$ 164.98
Protect your fuel system with the Longhorn Fab 201050 Universal FASS and AirDog Skid Plate Mount. Your FASS or AirDog Fuel Pump is a crucial part of your truck's fuel system. Don't just let your FASS or AirDog hang down from the frame and be exposed to road, tire, and other field hazards! The Longhorn Fab FASS and AirDog Skid Plate Mount gives you a sturdy mount, and protection for your FASS or AirDog Fuel System. Featuring a durable black powder coated finish, the FASS and AirDog Skid Plate Mount is constructed of 1/8" steel plate. The integrated skid plate protects your fuel system and does not require removal to install fittings, or remove and replace your filters. Designed for an easy bolt-on installation, this skid plate is an excellent addition to any trucks that spend time off-road, on the farm, and will event protect your fuel pump while being loaded and unloaded onto a trailer. Features: 3/8" Grade 8 Bracket Bolts Powder Coated Black Finish 1/8" Steel Plate ConstructionProvides Excellent Off-Road ProtectionLifetime Warranty To Original Owner Against BendingFits All FASS and AirDog Fuel Systems (Even With Extended Length Filters)
PPE 113050000 Diesel Lift Pump 1736 12.00 PPE 113050000 Diesel Lift Pump
3 5 6
$ 269.95
The PPE Diesel Lift Pump 113050000 is capable of pumping up to 160 gallons of fuel per hour! It's a key component to a reliable fuel system, rather than depending on the OEM CP3 to pull fuel from the tank, the PPE Diesel Fuel Lift Pump pushes fuel through the lines and filter. It eliminates the possibility of air being drawn into the system, and reduces stress on the factory CP3. Kit includes the pump, mounting bracket, dual 12V fuel pump relays, and a wiring diagram. Hoses, fittings and additional components are not included. For Powerstroke equipped Fords this pump must be used with a good working factory frame mounted pump. Features: Up to 160 gallons per hour (GPH) fuel flow Operating pressure 4-8 PSI with engine idling High flow 1/2 inch NPT inlet and outlet helps increase longevity of the stock CP3 pump Compatible with biodiesel, low and ultra low-sulfur diesel CARB E.O.# D-701-10 1 year warranty