Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
AirDog 901-04-0003-3 Low Pressure Indicator Light 2303 1.00 AirDog 901-04-0003-3 Low Pressure Indicator Light
$ 59
The PureFlow AirDog 901-04-0003-3 Low Pressure Indicator Light is a convenient add-on designed to work with your AirDog Fuel System. Featuring an 1/8" NPT sender, this light kit installs with your AirDog and is triggered when fuel pressure is below 5 PSI. Features: Activated Below 5psi Base Thread Size: 1/8" NPT Works With AirDog Fuel Systems
BD-Power 1050347 Flow-Max Fuel Heater Kit 29173 1.00 BD-Power 1050347 Flow-Max Fuel Heater Kit
4 5 1
$ 155
The BD-Power 1050347 Fuel Heater is a must have for those in cold climates. Prevent cold weather gelling of your AirDog fuel system with the BD-Power PTC Heating Element. Designed for quick installation, this heating element gets sandwiched between the water separator and filter head. The self regulating 320 watt heater has over 3x the amount of heating power of other single systems. Each kit includes heating element and wiring harness with sealed electrical connectors for an easy install. Features: Designed For AirDog Fuel Systems Installs Between Filter and Filter Head Self-Regulating 320 Watt Heater Note: This product will fit all AirDog, AirDog 2, and AirDog II-4G Fuel Systems.
BD-Power 1081130 Red LED Low Fuel Pressure Alarm Light 623 1.00 BD-Power 1081130 Red LED Low Fuel Pressure Alarm Light
4.167 5 6
$ 74
Protect the fuel system on your 1998.5-2007 Dodge 5.9L Cummins. A failing lift pump will not only cause sub-standard performance, it can cause costly damage to the injection pump. Keep tabs on your trucks fuel system with the BD low fuel pressure LED kit, which incorporates a red LED that illuminates if lift pump pressure falls below 5 PSI. Inexpensive protection and easy installation! Features: Red LED Illuminates Below 5 PSI Helps Avoid Fuel System Damage Additional InformationInstall Sheet
BD-Power 1081133 Amber LED Low Fuel Pressure Alarm Light 31180 1.00 BD-Power 1081133 Amber LED Low Fuel Pressure Alarm Light
$ 74
Protect the fuel system on your 1998.5-2007 Dodge 5.9L Cummins with the BD-Power 1081133 Amber LED Low Fuel Pressure Alarm Light. A failing lift pump will not only cause sub-standard performance, it can cause costly damage to the injection pump. Keep tabs on your trucks fuel system with the BD low fuel pressure LED kit, which incorporates a red LED that illuminates if lift pump pressure falls below 5 PSI. Inexpensive protection and easy installation! Features: Amber LED Illuminates Below 5 PSI Helps Avoid Fuel System Damage Additional InformationInstall Sheet
BD-Power VP44 Stealth Pump Cover Kit 714 1.00 BD-Power VP44 Stealth Pump Cover Kit
4.75 5 4
$ 69
The BD Stealth Cover for the 1998.5 to 2002 Dodge 24V fits onto the VP44 injection pump providing a secure, sealed connection in place of notching the pump wire for power modifications.Makes for a clean install and easy removal of racing performance boxes plus gives a more reliable connection. A must for the high performance enthusiast! Additional InformationInstall Sheet
Diesel RX DRX17SAR Universal Fuel Pressure Regulator 34958 2.00 Diesel RX DRX17SAR Universal Fuel Pressure Regulator
$ 99.99
The Diesel RX DRX17SAR Universal Fuel Pressure Regulator allows you to control the pressure with an aftermarket lift pump that does not have an integrated regulator. This can be setup as a regulated return, or used on a pressure side of the pump with a return back to the tank. This regulator uses -8 o-ring boss ports which can be adapted to a -10AN. Includes universal mounting bracket.Features: Universal - For Many ApplicationsBuilt From Corrosion Resistant Materials5 Port Design: 4 Pressure Ports and 1 Return Port -8 O-Ring Boss (ORB) Thread Pitch: 3/4-16 Dual Spring Design Allows For Adjustability
Dorman 904-463 Fuel Water Separator Drain Valve 34852 1.00 Dorman 904-463 Fuel Water Separator Drain Valve
$ 27.95
The Dorman 904-463 Fuel Water Separator Drain Valve replaces the failed valve on your 2000-2001 Dodge 5.9L Cummins Fuel Filter Housing. The original valve often breaks and once it's broken, is not available separately. To repair it, the whole housing has to be replaces. The Dorman 904-463 replaces just the broken component saving you time and money and restoring operation on your truck. Includes o-rings and hardware. Features:Durable Plastic ConstructionDirect Replacement For Proper FitIncludes Fuel-Resistant O-Ring SealCross Reference #:05015580AD, 5015580AA, 5015580AB, 5015580AC, 5015580AD
FASS 32283 Replacement Heater Element 35678 2.00 FASS 32283 Replacement Heater Element
$ 118.75
The FASS 32283 Replacement Heater Element is a direct plug and play replacement heater element for the FASS HK-1001 Electric Heater Kit. Features:For FASS Fuel Systems Replacement Heater Element Application Notes: Heater only, no other parts included. In most cases, this is replacement heater purchased by those looking to add a second probe for a dual heater setup. If using as a dual heater, the HKS-1001 Dual Electric Heater Splitter will make installation much easier (see related items below).
FASS FPR-1001 Fuel Pressure Regulator 11010 5.00 FASS FPR-1001 Fuel Pressure Regulator
$ 141.55
The FASS FPR-1001 Fuel Pressure Regulator is intended for aftermarket performance applications requiring higher fuel pressures than a typical daily driver. These applications can vary from drag race vehicles, competition pulling trucks or high performance marine applications. For your convenience we have pre-drilled and tapped a fuel pressure gauge port that will make adjusting your regulator simple, eliminating any guess work. As an added performance benefit, we have also engineered a boost compensation port. This will allow you to run a line from your manifold to increase fuel pressure, very beneficial when under active acceleration and fuel demand has been increased. Features: Adjustable Fuel Pressure For Gas and Diesel Applications Built-In Fuel Pressure Port Boost Compensation Port Designed For 1/2" Lines
FASS HK-1001 Electric Heater Kit 10994 2.00 FASS HK-1001 Electric Heater Kit
$ 151.05
The FASS Electric Heater Kit HK-1001 is an optional heater is intended as an upgrade for FASS systems being used in cold regions. Each FASS Titanium Series pump has ports for two electric heaters, that will aid in cold weather starts and keep fuel from gelling up while driving during sub freezing temperatures. The heater will begin warming the fuel block once the key is in the on position and will automatically shut off after the proper temperature has been reached. Features: Prevents Fuel Gelling Warms Fuel Block During Cold Starts Automatic On/Off Heater Fits Titanium Series System Complete Installation Kit Application Note: For FASS owners adding (2) Electric Heaters to their pumps a second probe is required (see related products below)If adding (2) heaters the FASS HKS-1001 Splitter Harness will make the installation easier (see related products below).
FASS HK-1002 High Output Heater Disk 50384 2.00 FASS HK-1002 High Output Heater Disk
$ 151.05
The FASS HK-1002 High Output Heater Disk can be added to any FASS Titanium or Titanium Signature Series Fuel System to prevent fuel gelling in cold temperatures. When fuel temperatures drop to below 34° Fahrenheit, a thermostatically controlled switch will automatically power on the 300 Watt Fuel Heater Disk to warm fuel as the fuel enters the FASS System, preventing the fuel from gelling in the FASS Filters. The fuel in the tank is also heated as the FASS continually polishes and returns fuel back to the tank. Once at optimal temperature, the thermostatic switch will automatically power off the High Output Heater Disk, eliminating any possibility of overheating the diesel fuel.Features:Prevents Fuel GellingAutomatic On/Off OperationWarms Fuel in the Fuel TankFor FASS Titanium and Titanium Signature Series
FASS HKS-1001 Dual Electric Heater Kit Splitter 34944 2.00 FASS HKS-1001 Dual Electric Heater Kit Splitter
$ 37.05
The FASS HKS-1001 Dual Electric Heater Kit Splitter eliminates the need to re-wire or solder the connections when installing dual electric heaters on your FASS Fuel System. Features:Plug and Play InstallationFor FASS Fuel Systems Eliminates Re-Wiring On Dual Heater KitsApplication Notes:Harness only, secondary heater required (see related items below).
FASS NDB-1001 No-Drill Pump Mounting Bracket 35682 4.00 FASS NDB-1001 No-Drill Pump Mounting Bracket
$ 76
The FASS NDB-1001 No-Drill Pump Mounting Bracket allows mounting of a FASS Titanium Lift Pump to your 1994-2012 Dodge 5.9L/6.7L Cummins or 2001-2012 GM 6.6L Duramax truck. This kit includes everything necessary for a complete bolt-on installation that requires no drilling or cutting of your vehicle. Features:Complete KitBolt-On InstallationMade In The USANote: This bracket is already included with vehicle specific FASS Titanium Fuel Systems.
Fleece FPE-34780 Auxiliary Fuel Filter Kit 50535 8.00 Fleece FPE-34780 Auxiliary Fuel Filter Kit
$ 246.05
The Fleece FPE-34780 Auxiliary Fuel Filter Kit gives you everything needed to filter fuel from your tank to the VP44 pump in your 1998.5-2002 Dodge 5.9L Cummins. Fleece includes a Donaldson 3 micron fuel filter and water separator (Donaldson P/N P553207), Filter base with integral mounting, distribution filter lock / filter coupler, and push Lock hose with all necessary AN and barb fittings to properly route, plumb and filter fuel for your VP engine from the tank to the VP44. Features:Auxiliary Fuel Filter KitDonaldson 3 Micron Fuel FilterAluminum Filter Base w/ Integral MountingAll Necessary Hose, Fittings, and Hardware
Industrial Injection ISBP7100KIT "P Pump" Conversion Kit 32181 35.00 Industrial Injection ISBP7100KIT "P Pump" Conversion Kit
$ 3419
Convert the VP44 on your 1998.5-2002 Dodge 5.9L Cummins to the proven P7100 pump with the Industrial Injection ISBP7100KIT "P Pump" Conversion Kit. The Industrial Injection "P Pump" Conversion Kit is designed to eliminate all the issues with the dreaded VP44 injection pump and its P0216 death code. If you are looking to add reliability and or performance to your 2nd gen Cummins then this conversion kit is the answer. The kit includes the needed components to install a P7100 "P Pump" injection pump on your truck. All you need to do is supply the pump and shutoff solenoid (not included). Kit Includes: Gear Housing Gear Housing Gasket Front Cover Oil Seal Timing Plug Pump Bracket Pump Brace Pump Drive Gear Throttle Kit Cam Sensor Adapter Mild Steel Fuel Lines Hardware Kit Note: Fuel shutoff/shutdown solenoid, and P7100 pump are not included. They must be sourced by the end user. You must specify model year for correct cam sensor adapter.
Vibrant 16458 -8AN Male to 1/2" Tube Adapter Fitting With Brass Olive Insert 80017 0.12 Vibrant 16458 -8AN Male to 1/2" Tube Adapter Fitting With Brass Olive Insert
$ 9.95
Adapt your -8AN male fitting to a 1/2" tube with a high quality black anodized aluminum Vibrant -8AN Male to 1/2" Tube Adapter Fitting with Brass Olive Insert Compression Fitting.Features: -8AN Threaded FittingAluminum ConstructionBrass Compression Fitting 1 Year Limited Warranty
XDP Injection Pump Gear Puller XD134 9611 1.00 XDP Injection Pump Gear Puller XD134
5 5 1
$ 35.95
The XDP Injection Pump Gear Puller XD134 is a finely machined tool that will remove the pump gear from the VE, P7100, VP-44 and CP3 injection pump. The increased depth on the step, prevents damage on the front cover. Competitive tools currently on the market can bend the sheet metal front cover on CP3 equipped engines. There just isn't enough clearance between the tool and the cover. If you're not very careful, you could have to remove the cover and hammer out the dents. If you don't fix the cover, you'll have an oil leak. The XDP Injection Pump Gear Puller now solves that problem by machining a deeper step on the puller to provide MORE clearance. The step is an additional .075 deeper. That amount makes the difference between a quick pump replacement and a long weekend fixing sheet metal. Included with the XDP Cummins injection pump gear removal tool, are instructions and two hardened and high-strength plated flange head bolts. Features: Made out of pre-hardened material instead of cheap cold rolled steel Double plated so it doesn't rust The step is an additional .075 deeper over competitors Makes for quick pump replacement, not a long weekend fixing sheet metal A tool that will last a lifetime MADE IN THE USA! Warranty Info:Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit. Click Here for full warranty policy.
TAKE 10% OFF SITEWIDE* WITH OUR PRE-BLACK FRIDAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: HOLIDAY10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 11/27/19 only.