Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
AFE 46-20062 BladeRunner GT Series Intercooler 15939 75.00 AFE 46-20062 BladeRunner GT Series Intercooler
$ 1691
The AFE 46-20062 BladeRunner GT Series Intercooler represents the next generation of intercoolers for the 1994-2004 Dodge 5.9L Cummins. The BladeRunner intercooler utilizes a 3" bar and plate design that is 37% larger than stock and outflows OE style tube and fin core designs by 31%! End Tanks: The unique BladeRunner end tanks are constructed out of 3/16'' TIG welded aluminum plate tanks that incorporate three multi-directional vanes. Multi-Directional Vane Technology: The BladeRunner MDV technology is used to direct hot air flow through the entire intercooler core. This allows for greater cooling than competitors units. 3" Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the OEM. Multiple Auxiliary Ports: Four tapped 1/8"" ports are supplied on the intercooler tubes for easy installation of gauges or nitrous oxide systems. Billet Aluminum Inlet/Outlets: Each BladeRunner Intercooler uses billet aluminum inlets and outlets for superior strength and durability. This intercooler also features 3"" inlet/outlet connections mated to oversized boost tubes, included. Tig-Welded: 100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. Flow and Performance: The intercooler tubes provided are constructed of 3" mandrel bent powder-coated stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Comes complete with 4-ply heavy duty couplings and constant tension T-bolt clamps for a tight and secure installation. The BladeRunner Intercooler is test pressure rated at 200psi which is perfect for high boost applications. Don't waste your time and money on modified factory intercoolers. Invest in the aFe BladeRunner intercooler, the most sophisticated intercooler design on the planet. Features: 100% Tig-Welded Lower EGT's 37% Larger Than Stock Multi-Directional Vanes 31% Flow Over Stock 3" Inlet/Outlet Pressure Rated @ 200 PSI
AFE 46-21061 BladeRunner Street Series Cast Intercooler 27136 60.00 AFE 46-21061 BladeRunner Street Series Cast Intercooler
$ 1007.95
The AFE 46-21061 BladeRunner Street Series Cast Intercooler for your 1994-2002 Dodge 5.9L Cummins features a 2.5" bar and plate core design that is 25% larger, outflowing stock intercoolers by 10% and increasing heat dissipation over the much smaller tube and fin design used by the OEM. The unique BladeRunner end tanks are constructed out of cast 356-T6 aluminum that incorporate Multi-Directional Vane (MDV) technology. This technology is used to direct hot air flow through the entire intercooler core, which allows for greater cooling. This intercooler is 100% TIG-Welded by certified craftsmen for strength and durability and test pressure rated at 100psi. End Tanks: The unique BladeRunner end tanks are constructed out of cast 356-T6 aluminum that incorporate three multi-directional vanes. Multi-Directional Vane Technology: The BladeRunner MDV technology is used to direct hot air flow through the entire intercooler core, which allows for greater cooling than competitors units. 2.5" Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the OEM. This intercooler also features 3.625" inlet/outlet connections compatible with stock intercooler tubes. This intercooler outflows OE style tube and fin core designs by 10%! Tig-Welded: 100% TIG-Welded by certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks. Pressure Tested: The BladeRunner Intercooler is test pressure rated at 100psi. Features: 25% Larger Than Stock Outflows Factory By 10% Pressure Tested To 100 PSI
AFE 46-21062-B BladeRunner Steet Series Intercooler & Tube Combo 28061 80.00 AFE 46-21062-B BladeRunner Steet Series Intercooler & Tube Combo
$ 1207.45
The AFE 46-21062-B BladeRunner Street Series Intercooler and Tube Combo improves flow, power and performance in your 1994-2002 Dodge 5.9L Cummins. This BladeRunner Street Series Intercooler kit represents the next generation of intercoolers. Utilizing a 2-1/2" bar and plate core design that is larger than stock, this kit outflows the OE intercooler system by 10%! End Tanks: The unique BladeRunner end tanks are constructed out of cast 356-T6 aluminum that incorporate three multi-directional vanes. Multi-Directional Vane Technology: The BladeRunner MDV technology is used to direct hot air flow through the entire intercooler core, which allows for greater cooling than competitors units. 2-1/2" Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the OEM. This intercooler also features 3-5/8" inlet/outlet connections compatible with stock intercooler tubes. This intercooler outflows OE style tube and fin core designs by 10%! TIG-Welded: 100% TIG-Welded by certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks. Pressure Tested: The BladeRunner Intercooler is test pressure rated at 100psi. Flow and Performance: The intercooler tubes are constructed of 3"" mandrel-bent aluminum tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The smooth mandrel bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. aFe Badging: A unique aluminum laser-cut aFe power logo plate is welded-on for an aggressive style. Installation Is A Snap: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes constant tension, spring loaded, T-bolt clamps for a leak-free seal and heavy-duty 5-Ply couplings for strength. Features: Pressure Test Rated @ 100 PSI Outflows Stock Intercooler By 10% 3" Hot and Cold Side Intercooler Tubes Durable Wrinkle Black Powdercoated Finish Bolt-In Installation - Uses Factory Mounting Locations 100% Tig-Welded By Certified Craftsmen For Strength and Durability
BD-Power 1042520 Cool-It Intercooler 1769 60.00 BD-Power 1042520 Cool-It Intercooler
$ 1207.5
BD-Power 1042520 Cool-It Intercooler is designed with streamlined external air passages improves engine cooling while offering less fan noise and less blade resistance, plus, improving engine power and efficiency of the radiator and air conditioning heat exchangers. Designed through testing at 100+ psi turbo boost pressure and 500oF turbo outlet temperatures, our extra thick cast end tanks with support struts have integrity and long life without ballooning and cracking. Stuffed Tube designs are commonly used on stock applications with boost pressures of 20-40 psi and 200-300F inlet temperatures. The tubes have a thin wall and 82% heat conductivity transfer. Higher boost pressures and temperatures will cause breaking of fin-to-wall welds resulting in tubes ballooning and reduced heat transfer. Micro Extruded Tube design is for applications producing 20-100 psi of boost pressure and inlet temperatures of 500+F. The tubes have a 0.025 wall thickness and designed enhanced inner fins that add to performance and already strong support structure resulting in a 95% heat conductivity transfer. No cracking or separation occurred when tested at over 400 psi. The lower the turbo boost pressure drop across the CAC (inlet vs. outlet) the higher the volume flow the more volume of air that can flow through the CAC and the higher the turbo boost pressure will result in lower exhaust gas temperatures (EGT). Features: Extruded Tube Design Extra Thick Cast End Tanks Includes Everything Needed For Installation Includes: Intercooler, (2) Clamps and Instructions Additional InformationInstall Sheet
DEI Cry02 Intercooler Sprayer Kit 080108 12062 20.00 DEI Cry02 Intercooler Sprayer Kit 080108
$ 386.8
CryO2 is a revolutionary product designed to reduce air and fuel temperatures thus creating power. Through the science of aerodynamics and cryogenics, Design Engineering has developed a system to harness the cryogenic properties of liquid CO2 to lower the intake charge temperature by up to 50°F. The system is modular and can be easily expanded. The CryO2 system provides two methods for cooling the air charge and one for cooling fuel, all utilizing the same burst of liquid CO2. CO2 is readily available at any welding or medical supply locations or where paintball guns are charged. The Power of COOL - Welcome to the future of power.The CryO2 Intercooler Sprayer Kit includes everything needed to enhance the intercoolers thermal transfer ability and improve its efficiency by as much as 50%.Features:Enhances intercooler thermal transfer abilityLowers air temperatures by as much as 35%Improves intercooler efficiency by as much as 50%Non-invasive system - Ability to run more boost safelyStraight forward easy bolt on installationCO2 is less expensive to refill than nitrousKit Includes: 10 lb. tank and bracketsCryogenic solenoid valve14 ft. stainless steel braided supply lineArming, activation, and WOT switchesAll necessary CO2 fittings and electrical hardware16 x 5 front-mount intercooler sprayer and hardware
DEI Cry02 Intercooler Water Sprayer Kit 080140 12067 1.00 DEI Cry02 Intercooler Water Sprayer Kit 080140
$ 70
DEIs CryO2 Intercooler Water Sprayer Kit was designed to be used by itself or in conjunction with DEIs CryO2 Intercooler Sprayers as a way to supercool intercoolers. By misting an intercoolers surface with the Water Sprayer and then venting CO2 on the cooling fins, the intercooler is further chilled resulting in a cooler denser intake charge enhancing a vehicles performance for extended periods of time. Each CryO2 Intercooler Water Sprayer Kit comes complete with reservoir, mounting hardware, flexible hose lines, wiring, push button activation switch, nozzle tubes, connectors and installation instructions. Universal kit designed for all air to air intercoolers and heat exchangers Can be used with or without our CryO2 Intercooler Sprayers Light weight construction 1.25 quart capacity Complete kit includes all hardware and instructions
Mishimoto MMINT-RAM-94 Intercooler 26897 70.00 Mishimoto MMINT-RAM-94 Intercooler
5 5 1
$ 917.95
The Mishimoto MMINT-RAM-94 performance intercooler has been precision engineering for your 1994-2002 Dodge 5.9L Cummins. Built with durable cast aluminum end tanks and an efficient bar-and-plate core, all designed for improved airflow, lower intake temperatures, and improved EGTs. The Mishimoto Cummins intercooler will support substantial boost pressure in your stock or highly modified truck.The Mishimoto Cummins intercooler features a 47% increase in core volume and is 50% thicker compared to the factory cooler. This performance design results in a proven 25% drop in AITs compared to the factory cooler. Offered in Sleek Silver or Stealth Black, the Mishimoto 5.9L Cummins intercooler is designed to work with the Mishimoto 5.9L Cummins Intercooler Pipe and Boot Kit. Like all of our Cummins performance parts, this kit includes the Mishimoto Lifetime Warranty.Features:High Quality Aluminum ConstructionIncreased Power and Efficiency Bar-and-Plate ConstructionSpecifications:Construction: Bar/PlateOverall Size: 47.2" x 17.5" x 10.9"Core Size: 35.91" x 16.65"Inlet: 3.66" (93mm)Outlet: 3.66" (93mm)Core Thickness: 3.00"Tank Wall Thickness: 4mmPurchase Includes:(1) Mishimoto Intercooler(2) AC Condenser Brackets(7) M6 x 1.0 x 16mm Bolts(4) M6 x 1.0 x 10mm Bolts and WashersMishimoto Lifetime Warranty
Mishimoto MMINT-RAM-94K Intercooler & Pipe Kit 26900 70.00 Mishimoto MMINT-RAM-94K Intercooler & Pipe Kit
$ 1250.95
The Mishimoto MMINT-RAM-94K performance intercooler and pipe kit has been precision engineered for your 1994-2002 Dodge 5.9L Cummins. With intercooler pipes built from 3" aluminum mandrel bent tubing, and an intercooler built with durable, cast aluminum end tanks, the efficient bar-and-plate core is designed for improved airflow, lower intake temperatures, and improved EGTs. The Mishimoto Cummins intercooler and pipe kit will support substantial boost pressure in your stock or highly modified truck. The Mishimoto Cummins intercooler features a 47% increase in core volume and is 50% thicker compared to the factory cooler. This performance design results in a proven 25% drop in AITs compared to the factory cooler. Offered in Sleek Silver or Stealth Black, the Mishimoto Intercooler and Pipe Kit features a Mishimoto Lifetime Warranty. Features: High Quality Aluminum Construction Increased Power and Efficiency Bar-and-Plate Construction Intercooler Specifications: Construction: Bar/Plate Overall Size: 47.2" x 17.5" x 10.9" Core Size: 35.91" x 16.65" Inlet: 3.66" (93mm) Outlet: 3.66" (93mm) Core Thickness: 3.00" Tank Wall Thickness: 4mm Silicone Boots with DuraCore: Boot 1: 3.00" Boot 2: 3.00", 3.60" Boot 3: 3.00", 3.60" Boot 4: 3.00" (6) 3.25" Constant-Tension T-Bolt Clamps (2) 4.0" Constant-Tension T-Bolt Clamps Purchase Includes: Mishimoto Intercooler AC Condenser Brackets Installation Hardware Duracore Intercooler Boots Intercooler Pipes Constant Tension T-Bolt Clamps Mishimoto Lifetime Warranty Warranty: Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer. A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product.The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid. MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products. Accident Protection Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident. For all warranty claims, please contact Mishimoto.
Turbonetics Torque-Master Intercooler Upgrade #2-479 1982 60.00 Turbonetics Torque-Master Intercooler Upgrade #2-479
$ 1168.75
Reduce the intake temperature on your 1994-2002 Dodge 5.9L Cummins by an average of 150 degrees with the Turbonetics Torque-Master Intercooler TN2-479. By reducing the intake temperature, just as much exhaust gas temperature can be reduced allowing you to pull longer, steeper, and heavier loads. Features:Lowers Intake and Exhaust Gas TemperaturesDirect Bolt-inLess than 1 PSI Pressure Drop