Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
AFE 49-43001 MACH Force XP 4" Turbo-Back Exhaust System 2096 84.00 AFE 49-43001 MACH Force XP 4" Turbo-Back Exhaust System
4.333 5 3
$ 627.95
Features Include: Mandrel bent pipe, not compression bent, for 20% higher flow. Straight through wide open, high-flow mufflers, no baffles or chambers, less chance of resonation. (excluding DPF back systems) Tuned to specific vehicle applications for ultimate power when used in conjunction with AFE air intake filters. OEM style bayonet hangers with strong high-quality band clamps for better seal. 2-Year Warranty Systems Specs. 409 Stainless Steel Turbo-Back One-piece over axle 304 Tip Included
AFE ATLAS Aluminized Exhaust System 49-03001 (Turbo-Back) 11135 80.00 AFE ATLAS Aluminized Exhaust System 49-03001 (Turbo-Back)
5 5 1
$ 444.6
The new ATLAS exhaust is engineered to perform in the most extreme environments. This system is constructed from precision, mandrel bent 4" aluminized steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. The 2-piece tailpipe and bayonet style hangers provide a hassle-free installation. To provide a leak-free seal, OE style band clamps are used that offer a 360º sealing area vs. cheap U-bolt clamps used in other systems. A 12" free-flowing straight-through designed muffler is used to produce a deep, powerful sound. Systems are available in 4 turbo back or 4 down pipe back with or without muffler. ATLAS exhaust systems are the perfect combination of performance, fit and value.Installation is a Snap:ATLAS exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation.Leak-Free Seal:High quality OE style band clamps are used for a complete 360º sealing surface. Standard U-bolt clamps used by other systems only seal at the bottom and top of the tube allowing leak paths.Aggressive Sound:A free-flowing 12" wide muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig.Perfect Fit:OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.Flow and Performance:ATLAS exhaust systems are constructed of precision, mandrel bent 4" aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs.System Options With Muffler 49-03001Without Muffler 49-03001NM
AFE Large Bore HD Exhaust System 49-13001 (Turbo-Back) 2074 72.00 AFE Large Bore HD Exhaust System 49-13001 (Turbo-Back)
1 5 1
$ 567.15
Features Include: Mandrel bent pipe, not compression bent, for 20% higher flow. Straight through wide open, high-flow mufflers, no baffles or chambers, less chance of resonation. (excluding DPF back systems) Tuned to specific vehicle applications for ultimate power when used in conjunction with AFE air intake filters. OEM style bayonet hangers with strong high-quality band clamps for better seal. 2-Year Warranty Systems Specs. 409 Stainless Steel Turbo-Back Two-piece over axle No tip included
Banks Power 7.3L Monster Exhaust System 11526 80.00 Banks Power 7.3L Monster Exhaust System
$ 638.7
Monster Exhaust 100% stainless system extends engine longevity by maintaining the turbine outlet EGT safely within stock recommendation. The 3" Turbine Outlet Pipe, which replaces the smashed stock piece (see below), flows 728 CFM @ 1 PSI, beating stock by 26% and the nearest competitor by 12%. The streamlined 4" exhaust pipe and tailpipe are formed of heavy-wall tubing with constant-diameter bends to slash backpressure. The polished-stainless straight-through Monster muffler has an exclusive expansion chamber to dissipate the annoying mid-range drone that affects most straight-through designs. The high-flow muffler utilizes spun ceramic, very-high-temperature packing and delivers a rich, throaty exhaust sound. The huge 5" polished tip sports a rolled edge. Double-walled design with 1/2" air gap keeps heat from tarnishing exterior mirror finish. Adjustable clamp for positioning on tailpipe. *This exhaust system retains the factory Catalytic Converter
MBRP 4" Installer Series Turbo-Back Exhaust System S6218AL 271 80.00 MBRP 4" Installer Series Turbo-Back Exhaust System S6218AL
4.5 5 4
$ 479.99
The Best Systems Start with the Best MaterialsBuilt from heavy duty aluminized steel our Installer Series performance exhaust systems offer a value price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system. Constructed to the same specifications as our top of the line Pro Series we back this line with an industry leading 3 Year Warranty.Built to Perform You count on your truck to tow all of your gear to where you want it. With your MBRP performance exhaust you can make that happen with up to18 HP more horsepower and 28 ft/lb more torque. Give your truck more pulling power and much improved throttle response with an MBRP diesel exhaust system. Our systems are so much more efficient, it will be easy to see what your truck can really do. Minimize BackpressureThe secret to getting more out of your diesel engine is to give it lots of cool, clean air. The only way that you can get fresh air in is to get the hot air out. From the spiral louvered high flow muffler to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. Drop exhaust gas temperature by up to 200ºF and set the stage for all the performance you want. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders. Easy InstallationMBRP systems are as much fun to install as to drive with on your truck. Bolt-on, no weld design makes installing this on your truck a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box, no matter what configuration of truck you have.Sound and Style Performance is one thing but at MBRP we believe that appearance and sound is just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your pickup. With our MBRP brand etched on the tip and our unmistakable styling, there's no question that you have the hottest exhaust on the road - MBRP.Features:4" Aluminized Steel ConstructionTurbo-Back Exhaust System3" Turbo Outlet Downpipe 3 Year WarrantyRich, Mellow Exhaust NoteInstalls With Common Hand Tools Mirror Polished, T304 Stainless Steel Exhaust TipApplication Note: All Cabs and Beds applies to Ford F-250/350 Pickups. This system is not designed for use on Cab and Chassis models.
MBRP 4" Performance Series Turbo-Back Exhaust System S6218P 4029 80.00 MBRP 4" Performance Series Turbo-Back Exhaust System S6218P
4 5 1
$ 399.99
The Best Systems Start with the Best MaterialsBuilt from heavy duty aluminized steel, the MBRP 4" Performance Series Turbo-Back Exhaust System S6218P gives you a value priced kit for your 1994-1997 Ford 7.3L Powerstroke without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system. Constructed to the same specifications as our top of the line Pro Series we back this line with a 1 Year Warranty.Built to Perform You count on your truck to tow all of your gear to where you want it. With your MBRP performance exhaust you can make that happen with up to 18 HP more horsepower and 28 ft/lb more torque. Give your truck more pulling power and much improved throttle response with an MBRP diesel exhaust system. Our systems are so much more efficient, it will be easy to see what your truck can really do. Minimize BackpressureThe secret to getting more out of your diesel engine is to give it lots of cool, clean air. The only way that you can get fresh air in is to get the hot air out. From the spiral louvered high flow muffler to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. Drop exhaust gas temperature by up to 200ºF and set the stage for all the performance you want. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders. Easy InstallationMBRP systems are as much fun to install as to drive with on your truck. Bolt-on, no weld design makes installing this on your truck a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box, no matter what configuration of truck you have.Sound and Style Performance is one thing but at MBRP we believe that appearance and sound is just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your pickup. With our unmistakable styling, there's no question that you have the hottest exhaust on the road - MBRP.Features:4" Aluminized Steel ConstructionTurbo-Back Exhaust System 3" Turbo DownpipeTip Not Included1 Year Warranty
MBRP 4" XP Series Turbo-Back Exhaust System S6218409 1728 78.00 MBRP 4" XP Series Turbo-Back  Exhaust System S6218409
5 5 2
$ 584.99
XDP is a MBRP Factory Authorized Online Retailer ID# 600207727. We would like you to shop with confidence knowing your purchase is covered by the manufactures warranty. The Best Systems Start with the Best Materials MBRP's XP Series is the performance exhaust of choice for the enthusiast who needs a system that can take anything that the road throws at it. This system's rugged sixteen gauge T409 construction can be counted on to withstand everything from salt to rocks, tar to grime. We have had such success with this line that we back it with a Lifetime Warranty. Built to Perform You count on your truck to tow all of your gear to where you want it. With your MBRP performance exhaust you can make that happen with up to18 HP more horsepower and 28 ft/lb more torque. Give your truck more pulling power and much improved throttle response with an MBRP diesel exhaust system. Our systems are so much more efficient, it will be easy to see what your truck can really do. Minimize Backpressure The secret to getting more out of your diesel engine is to give it lots of cool, clean air. The only way that you can get fresh air in is to get the hot air out. From the spiral louvered high flow muffler to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. Drop exhaust gas temperature by up to 200F and set the stage for all the performance you want. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders. Easy Installation MBRP systems are as much fun to install as to drive with on your truck. Bolt-on, no weld design makes installing this on your truck a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box, no matter what configuration of truck you have. Sound and Style Performance is one thing but at MBRP we believe that appearance and sound is just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your pickup. With our MBRP brand etched on the tip and our unmistakable styling, there's no question that you have the hottest exhaust on the road - MBRP. Features: 4" T409 Stainless Steel Turbo-Back Exhaust System 3" Aluminized Downpipe Off-Road - Removes Cat. Converter Automatic Transmission Only Installs With Common Hand Tools Polished T304 Exhaust Tip Lifetime Warranty Buy Now and receive a MBRP T5051 mirror polished stainless steel angled cut exhaust tip(s) FREE!
Silverline FS100A 4" Turbo-Back Aluminized Exhaust System 9315 85.00 Silverline FS100A 4" Turbo-Back Aluminized Exhaust System
$ 474.15
The Silverline FS100A 4" Turbo-Back Aluminized Exhaust System for your 1994-1997 Ford 7.3L Powerstroke is designed to increase horsepower and flow while replacing the old and restrictive exhaust on your truck. Built for optimal performance and a perfect fit, Silverline exhaust systems are developed using the latest technology and undergo extensive fitment testing. Using precise measurements, the mandrel bent tubing improves airflow for enhanced horsepower. With a Silverline diesel muffler, this system provides aggressive, but manageable sound. Built with a free-flow design, the strategically placed louvers provide sound deadening for a more pleasant in-cab ride while still providing the powerful sound of the diesel engine during acceleration. Exhaust tip not included. Features: Bolt-On Design 4" Aluminized Mandrel Bent Tubing Performance Muffler With Louvered Design Includes Necessary Installation Hardware Application Notes: Fits regular cab, and ext. cab models only with automatic transmissions. Will not fit on manual transmissions or crew cab 4-door models. Warranty ANSA Exhaust Technologies warrants to the original retail purchaser that each Silverline Aluminized Exhaust System purchased from an authorized dealer shall be free from defects in material and workmanship for the period of 1-year. When used on private passenger cars and light trucks for personal use under normal operating conditions. The warranty commences on the date of the original purchase and is effective for the duration listed above, or for as long as the original purchaser owns the vehicle, whichever comes first.