Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
AirDog 901-04-0003-3 Low Pressure Indicator Light 2303 1.00 AirDog 901-04-0003-3 Low Pressure Indicator Light
$ 59
The PureFlow AirDog 901-04-0003-3 Low Pressure Indicator Light is a convenient add-on designed to work with your AirDog Fuel System. Featuring an 1/8" NPT sender, this light kit installs with your AirDog and is triggered when fuel pressure is below 5 PSI. Features: Activated Below 5psi Base Thread Size: 1/8" NPT Works With AirDog Fuel Systems
Alliant Fuel Filter Drain Valve Kit AP0008 14344 1.00 Alliant Fuel Filter Drain Valve Kit AP0008
$ 13.95
OEM Part#: F6TZ9157BA, F5TZ9151A, 1825753C912, 1823645C912 Application: 94-97 Ford F-Series and E-Series
Alliant Fuel Filter Housing Assembly AP63424 14353 4.80 Alliant Fuel Filter Housing Assembly AP63424
$ 419.53
OEM Part #: F6TZ9155AB, FG1054 Note: Includes Fuel Filters Element Service Kit PFF4595, Fuel Filter Top Cover RK31019 and Fuel Filter Heater Element AP63409. Field data indicates both housings (AP63424 and AP63425) were used for my 1998 vehicles. Be sure to verify which housing is in place.
Bostech DEC020870 Fuel Tank Pickup & Screen Repair Kit 25456 2.00 Bostech DEC020870 Fuel Tank Pickup & Screen Repair Kit
$ 69.95
The Bostech DEC020870 Fuel Tank Pickup and Screen Repair Kit 1994-2003 Ford 7.3L Powerstroke is for use on your F-Series and E-Series vehicles with the filter in the bottom of the fuel tank pickup. Over time, the factory filter can become clogged and cause drivability issues, that are very hard to track drown. Features: OE Quality Replacement Fix Drivability Issues From Plugged Screen Replaces OE Part# E5TZ-9J306-BA 13 Month Unlimited Mileage Warranty Technical Notes: Scan tools will often display a low oil pressure code P1211, P1212, P1284. These codes would lead most technicians to replace the ICP Sensor, ICP Sensor Connector, or the High Pressure Oil Pressure Pump. If these items are replaced the vehicle could run temporarily but the symptoms will reappear. The lack of fuel will cause the fuel injector to not allow the High Pressure Oil to build pressure. The Injector is allowing the high pressure oil to flow freely through the system via the return, and not allowing sufficient restriction due to lack of fuel pressure keeping pressure on the intensifier piston internally. Under these conditions the High Pressure System cannot supply enough pressure to overcome this situation in most cases. This usually will trigger low ICP Codes. Until the fuel restriction is repaired the system will not perform correctly or at all, depending on the severity of the restriction.Bostech Old Part#: ISK870
Bostech DEC021210 Fuel Filter Heating Element 32514 1.00 Bostech DEC021210 Fuel Filter Heating Element
$ 49.95
Replace the defective Fuel Heater in your 1994-2003 Ford 7.3L Powerstroke with the Bostech DEC021210 Fuel Filter Heating Element. Designed as a direct replacement, the Bostech Fuel Filter Heating Element restores proper function to your fuel system. Features: Stock Replacement 13 Month Unlimited Mileage Warranty Replaces OE Part#: F81Z-9J294-AA, 1831196C92
Bostech DEC021221 Fuel Filter Housing Water Drain Valve 32478 2.00 Bostech DEC021221 Fuel Filter Housing Water Drain Valve
$ 54.95
Replace the broken Water Separate Drain Valve in your 1994-1997 Ford 7.3L Powerstroke with the Bostech DEC021221 Fuel Filter Housing Water Drain Valve. An item that is commonly broken, Bostech offers the Drain Valve separately so you don't need to replace the entire housing. Features: Direct Replacement Affordable Fix-It Solution 13 Month Unlimited Mileage Warranty Replaces OE Part# F5TZ-9A153-A, 1823629C91
Bostech ISK624 Fuel Filter Housing Seal Kit 32525 1.00 Bostech ISK624 Fuel Filter Housing Seal Kit
$ 34.95
Reseal the Fuel Filter Housing in your 1994-1997 Ford 7.3L Powerstroke with the Bostech ISK624 Fuel Filter Housing Seal Kit. Bostech saves you time and money by providing you with a filter housing gasket set so you can reseal the housing on your truck, instead of having to replace it. Bostech gaskets and seals are constructed from top quality materials designed to meet or exceed OE specifications. Features: Fuel Filter Housing Seal Kit 13 Month Unlimited Mileage Warranty
Diesel RX DRX17SAR Universal Fuel Pressure Regulator 34958 2.00 Diesel RX DRX17SAR Universal Fuel Pressure Regulator
$ 99.99
The Diesel RX DRX17SAR Universal Fuel Pressure Regulator allows you to control the pressure with an aftermarket lift pump that does not have an integrated regulator. This can be setup as a regulated return, or used on a pressure side of the pump with a return back to the tank. This regulator uses -8 o-ring boss ports which can be adapted to a -10AN. Includes universal mounting bracket.Features: Universal - For Many ApplicationsBuilt From Corrosion Resistant Materials5 Port Design: 4 Pressure Ports and 1 Return Port -8 O-Ring Boss (ORB) Thread Pitch: 3/4-16 Dual Spring Design Allows For Adjustability
Dorman 904-208 Fuel Filter Cap 29241 1.00 Dorman 904-208 Fuel Filter Cap
$ 14.56
The Dorman 904-208 Fuel Filter Cap is a direct replacement for your 1994-1997 Ford 7.3L Powerstroke. Over time, the factory filter cap can crack, or become damaged causing fuel leaks, air leaks, and other fuel system issues. Dorman's Fuel Filter Cap saves you time and money buy just replacing a cap, and not the entire assembly. Fits models built before 1/13/1998. Features: Direct Fit Engineered For Convenience and Long Lasting Service Cross Reference Numbers: Ford OE Part#: F5TZ-9G270-A Alliant Part#: RK31019 Navistar Part#: 1825190C91
Dorman 904-210 Fuel Filter Heating Element 29200 1.00 Dorman 904-210 Fuel Filter Heating Element
$ 51.95
The Dorman 904-210 Fuel Filter Heating Element improves on the original design of the factory heating element in your 1994-2003 Ford 7.3L Powerstroke. Dorman has applied advanced technology to all their Diesel Fuel Heating Elements so that a secure, lasting electrical connection is ensured. The Heating Element effectively prevents fuel from gelling in the fuel filter bowl, so your vehicle operates properly even in the coldest temperatures. Features: Direct Replacement Improved Design Cross Reference Numbers: Ford OE Part#: F5TZ-9J294-A, F81Z-9J294-AA Navistar: 1825186C91, 1831196C92
Dorman 904-221 Water Separator Drain Valve 29238 1.00 Dorman 904-221 Water Separator Drain Valve
$ 56.95
The Dorman 904-221 Water Separator Drain Valve allows you to replace just the component, and not the whole filter housing on your 1994-1997 Ford 7.3L Powerstroke. Dormans Fuel Water Separator Valve effectively drains water from the fuel filter. It includes new mounting screws for easy installation. Features: Direct Replacement Durable, Plastic Construction Includes Fuel Resistant O-Ring and Gasket Cross Reference Numbers: Ford OE Part#: F5TZ-9A153-A Navistar Part#: 1823629C91
FASS 32283 Replacement Heater Element 35678 2.00 FASS 32283 Replacement Heater Element
$ 118.75
The FASS 32283 Replacement Heater Element is a direct plug and play replacement heater element for the FASS HK-1001 Electric Heater Kit. Features:For FASS Fuel Systems Replacement Heater Element Application Notes: Heater only, no other parts included. In most cases, this is replacement heater purchased by those looking to add a second probe for a dual heater setup. If using as a dual heater, the HKS-1001 Dual Electric Heater Splitter will make installation much easier (see related items below).
FASS FPR-1001 Fuel Pressure Regulator 11010 5.00 FASS FPR-1001 Fuel Pressure Regulator
$ 141.55
The FASS FPR-1001 Fuel Pressure Regulator is intended for aftermarket performance applications requiring higher fuel pressures than a typical daily driver. These applications can vary from drag race vehicles, competition pulling trucks or high performance marine applications. For your convenience we have pre-drilled and tapped a fuel pressure gauge port that will make adjusting your regulator simple, eliminating any guess work. As an added performance benefit, we have also engineered a boost compensation port. This will allow you to run a line from your manifold to increase fuel pressure, very beneficial when under active acceleration and fuel demand has been increased. Features: Adjustable Fuel Pressure For Gas and Diesel Applications Built-In Fuel Pressure Port Boost Compensation Port Designed For 1/2" Lines
FASS HK-1001 Electric Heater Kit 10994 2.00 FASS HK-1001 Electric Heater Kit
$ 151.05
The FASS Electric Heater Kit HK-1001 is an optional heater is intended as an upgrade for FASS systems being used in cold regions. Each FASS Titanium Series pump has ports for two electric heaters, that will aid in cold weather starts and keep fuel from gelling up while driving during sub freezing temperatures. The heater will begin warming the fuel block once the key is in the on position and will automatically shut off after the proper temperature has been reached. Features: Prevents Fuel Gelling Warms Fuel Block During Cold Starts Automatic On/Off Heater Fits Titanium Series System Complete Installation Kit Application Note: For FASS owners adding (2) Electric Heaters to their pumps a second probe is required (see related products below)If adding (2) heaters the FASS HKS-1001 Splitter Harness will make the installation easier (see related products below).
FASS HKS-1001 Dual Electric Heater Kit Splitter 34944 2.00 FASS HKS-1001 Dual Electric Heater Kit Splitter
$ 37.05
The FASS HKS-1001 Dual Electric Heater Kit Splitter eliminates the need to re-wire or solder the connections when installing dual electric heaters on your FASS Fuel System. Features:Plug and Play InstallationFor FASS Fuel Systems Eliminates Re-Wiring On Dual Heater KitsApplication Notes:Harness only, secondary heater required (see related items below).
Fitch Fuel Catalyst (Ford Powerstroke) 2112 10.00 Fitch Fuel Catalyst (Ford Powerstroke)
3.333 5 3
$ 361.85
Watch Video! The Fitch Fuel Catalyst transforms diesel into a superior quality of fuel, allowing a combustion engine to extract the maximum amount of energy with minimal emissions. Get more Performance out of your engines for less: less money, less pollution and less maintenance headaches. The Fitch Fuel Catalyst is a patented metal alloy that causes a molecular change in hydrocarbon fuels such as gas, diesel, oil, kerosene, etc. This reaction is similar to the refining process that takes place at the refinery. However, a refinery uses heat and pressure to "crack" octane or refine the fuel, where as the Fitch Catalyst creates a transformation in fuel but the "re-refining" process takes place on board a machine, at a low temperature. As fuel passes over the catalyst, it rejuvenates the gasoline or diesel, allowing for a more thorough combustion process. An engine operates most efficiently and produces maximum horsepower and torque when it is running on the highest quality fuel. Gasoline and diesel is at its most optimal quality when it is first refined but unfortunately during storage and transportation, the fuel quality drastically diminishes. Sacrificed horsepower, torque and efficiency may be the result of this poorer fuel quality. A less than optimal fuel will also produce more emissions, soot build up, and deposits in engine oil and injectors. The Fitch Fuel Catalyst will boost octane in gasoline, increase cetane in diesel and re-refine the fuel quality, returning it to a superior "refinery" fresh state guaranteeing maximum performance and efficiency from the engine. Unlike additives that require replenishing, the Fitch Fuel Catalyst is warranted for 250,000 miles and does not dissolve or loose its potency. The Fitch Fuel Catalyst simply improves fuel quality and all engines will experience the benefits: Increased Fuel Economy (1-2.5 mpg) Improved Horsepower and Torque Improved Cetane and Lubricity in Diesel Fuel Reduced Emissions and Soot Build Up Extended Engine Longevity Reduced Overall Engine Maintenance What is the difference between a permanent fuel treatment and an additive? An additive is usually a chemical added to fuel. Additives must be replenished at each refueling. A permanent fuel treatment affects the fuel but does not become part of it and does not need to be replaced. What is the Fitch Fuel Catalyst? A metal alloy composed by a proprietary process that permanently transforms hydrocarbon fuels to a superior quality fuel than what is purchased from a gas station. How does Fitch work? Gasoline and diesel is at its most optimal when it is first refined but unfortunately during storage and transportation, the fuel quality drastically diminishes. Fuel is attacked by oxygen, ozone, and microorganisms (bacteria, yeast, and mold) that grow in the fuel creating a less than optimal fuel. A less than optimal fuel will produce less engine efficiency, less performance, more emissions, soot build up, and deposits in engine oil and injectors. By installing a Fitch System, the fuel is treated with the catalyst on board the vehicle, re-refining the fuel to its most optimal state allowing the engine to produce maximum performance, efficiency and lowering emissions and maintenance Warranty The Fitch Fuel Catalyst device is guaranteed to be free from defects in material and workmanship for a period of 250,000 miles! Do it yourself - Bolt-on in line application using quick connect SLC and SAE fittings to adapt to OEM fuel line. No cutting of fuel line required. Adapts right to existing OEM quick connect fittings. Complete kit including Fitch in line unit, hose set w/quick disconnect fittings, adaptors and hardware necessary for installation. Instructions included with purchase. Only basic hand tools are required to install.
Vibrant 16458 -8AN Male to 1/2" Tube Adapter Fitting With Brass Olive Insert 80017 0.12 Vibrant 16458 -8AN Male to 1/2" Tube Adapter Fitting With Brass Olive Insert
$ 9.95
Adapt your -8AN male fitting to a 1/2" tube with a high quality black anodized aluminum Vibrant -8AN Male to 1/2" Tube Adapter Fitting with Brass Olive Insert Compression Fitting.Features: -8AN Threaded FittingAluminum ConstructionBrass Compression Fitting 1 Year Limited Warranty