{{ product.name }}
See New Part # {{ product.superseded_product_sku }}
{{ determineProductPrice( product ) }}
{{ determineProductSalePrice( product ) }}
0
No Products
No Results
Showing Parts for —
{{ active_vehicle.name }}
Did you mean {{ response.didYouMean.query }}?
Fuel Tanks
Replace the leaking dipstick / oil fill tube on your 1989-2010 Ford Super Duty With E4OD, 4R100 and 5R110 Transmission with the ATS 3142203104 Transmission Filler Tube Repair Kit. This filler tube repair kit features a billet two-piece tube that uses an oil resistant O-ring to ensure a leak-free seal. Installation of the filler tube repair kit is easy and takes about 20 mins as it does not require the removal of the transmission like the stock filler tube does.Features:Easy InstallationBillet Two-Piece TubeDoes Not Require Transmission Removal
1
5
1
Maximize fuel delivery to your engine with the BD-Power 1050330 Flow-Max Fuel Tank Sump. Designed for a no-tank drop installation, the BD Flow-Max Fuel Tank Sump installs with a single 3" hole and includes a filter screen. A perfect addition to any aftermarket fuel system like the BD-Power Flow-Max Fuel Pumps, and more! Features: Easy InstallationTank Removal Not RequiredMaximizes Amount Of Usable Fuel In Tank
Pull fuel from the bottom of your fuel tank with the Diesel RX DRX09SMP Fuel Tank Sump. This Fuel Tank Sump eliminates the 1/4 tank issues associated with a draw-straw style fuel pickup. Built in the USA from corrosion resistant materials. Features:Fuel Tank Drop Not Required4.5" Diameter Mounting FlangeCorrosion Resistant ConstructionIncludes Alignment Screws For InstallationKit Includes:1 Anodized Aluminum Sump Bowl2 Anodized Aluminum Sandwich Plates1 Brass 1/2" Male Push to Lock to -8AN Female Fitting1 Zinc Plated Male 3/8" NPT to Male -8AN Fitting10 Stainless Steel 1/4"-20 Socket Head Cap Screws10 Zinc Plated 1/4" Sealing Washers1 Viton Inner O-ring Seal1 Viton Outer O-ring Seal4 Steel Alignment Set Screws (Used for Alignment Only, Then Discarded)1 Packet of Thread Sealer
5
5
1
The FASS STK-5500 Fuel Sump Kit is designed to be capable of functioning independently or in combination with our Fuel Air Separation System, drivers can now get the benefits that come with a sump but without any of the inherited issues.
Like most sumps on the market, the FASS Sump Kit can pull fuel from the outside of the sump through a pre-tapped 1/2" fuel port. However this brings the inherited issues that a line can catch and pull loose. To fix this issue FASS decided that they would also offer a way to pull fuel from the inside of the tank using a Bulkhead fitting and Suction Tube Kit, effectively eliminating this possibility.
Features:
Pulls Fuel From Top Or Bottom Of Tank
Billet Bulkhead Fitting
Eliminates 1/4 Tank Issues
Use the FASS STK-5500B Fuel Tank Sump (With Suction Tube Upgrade) to eliminate the 1/4 tank issues common with most aftermarket fuel systems. Get the added benefits of the fuel tank sump, without the risk of the issue of a damaged line under the truck. The FASS STK-5500B Fuel Tank Sump uses a suction tube that will connect to your existing bulkhead fitting so you can pull fuel from the lowest point in your tank, but feed out of the top so you don't have hoses underneath the truck. Features: Pulls From Bottom Of Tank For Trucks With Existing Bulkhead FittingEliminates 1/4 Tank Issues Associated With Aftermarket PumpsApplication Notes: This kit is for use on trucks that already have a bulkhead fitting. If you do not have an existing bulkhead fitting, consider purchasing STK-5500 Kit (See related items below).
Install the FASS STK-5500BO "No Drop" Fuel Tank Sump (Bowl Only) and eliminate the 1/4 tank issues associated with aftermarket fuel systems. The FASS Fuel Tank Sump includes a 2-piece inner ring that allows you to install this fuel tank sump, without removing the fuel tank from your truck. Each sump bowl is machined for a dual o-ring seal and includes the hardware necessary for installation. Features: No Tank Drop InstallationEliminates 1/4 Tank Issues Provides Fuel From Bottom Of TankGreat Addition for FASS Titanium Series Pumps
The Titan 5310060 60 Gallon In-Bed Fuel Tank w/ 12-Volt Pump and Nozzle for your diesel pickup is made to last! Featuring Titan's famous cross-linked polyethylene such as its invulnerability to corrosion, resistance to heat transfer and condensation, durability and maintenance of its good looks. It includes a pre-wired 12 volt transfer pump that does approximately 8 gallons per minute (equivalent to standard gas stations). The moter is UL Listed to U.S. and Canadian safety standards and comes complete with power cord, and manual nozzle. This fully baffled tank comes with a "Free Spinning" locking cap, mechanical fuel gauge, and all mounting hardware is included. This transfer tank fits most all full sized diesel pickups regardless of bed length.
Titan's
cross-linked polyethylene (XLHDPE) in-bed tank has a .250 nominal wall
thickness, is fully baffled and gives you the advantages of advanced
design and materials, as well as Titan's legendary quality and
durability. Featuring built-in Tie-Downs for your payload TITAN's
cross-linked polyethylene is not only corrosion proof it's nearly 200
times less heat and cold conductive than metal tanks. Each tank comes complete with a lifetime warranty on the tank body.
Features:
60-Gallon Capacity
For Diesel Fuel Only
12-Volt Pump With Nozzle
Tank Body Weighs Only 51lbs.
Durable, Corrosion Proof Finish
Easy Installation and Removal
Fits Under Tonneau Cover
Zinc Plated Hardware Features Tie-Downs
Looks Good On Any Truck
The Titan 5410050 Travel Trekker 50 Gallon In-Bed Auxiliary Fuel System is a better concept in auxiliary fuel systems. The Titan Travel Trekker is made of Titan's famous military grade, cross-linked polymer that is tougher than steel and longer lasting than aluminum. Its durability is legendary. Titan routinely tests their tanks using state-of-the-art computer simulations as well as physical drop tests. They fill their tanks completely and drop them 30 feet onto a steel plate, never losing a drop of liquid. They are so tough and well-proven that they are backed with a Lifetime Warranty.
There are no welds to fail and if you ever accidentally run your gooseneck hitch into your Travel Trekker you will most likely find it springs right back into shape. Also, soap, water and perhaps a little furniture spray polish is all you need to keep your tank looking new. The Travel Trekker is baffled to minimize fuel sloshing and compact enough that it can be installed in full-sized pickup beds without interfering with most in-bed hitches and tonneau covers.
With one touch, the remarkable Titan Electronic Controller transfers fuel from the Travel Trekker to the vehicles primary fuel tank until it is automatically stopped by the controller or the button is touched again. The controller monitors and reports the fuel level in the auxiliary system at all times. Controller installation is simple and never requires cutting into the vehicles wiring harness which could affect the manufacturers warranty. Fuel is pumped from the top of the tank which is safer and more environmentally responsible than gravity flow systems.
The system comes complete with all necessary installation components and detailed instructions. Whatever your passion, let us help you fuel it! Meets DOT FMCSA Title 49 Requirements.
Features:
50 Gallon Capacity
Lifetime Warranty
For Diesel Fuel Only
Never Any Corrosion
Electronic Controller Transfers Fuel
Does Not Interfere With In-Bed Hitches
Note: This tank does not work with trucks that have Rambox. The Titan 9900001 Aluminum Body Insulator Kit is required for aluminum body trucks. See related products below.
The Titan 5410060 60 Gallon In-Bed Fuel Tank w/ Electronic Transfer System for your diesel Pickup transfers up to 60 gallons of fuel on-the-go. The Titan Solid State, Electronic Controller lets you know how much fuel remains in your tank at all times. With the touch of a button, the controller pumps a preset amount of fuel into your main tank or another touch stops it at any time. The controller is very compact and can be easily installed anywhere in your cab. This fully baffled tank comes with a "Free-Spinning" locking cap and all mounting hardware is included. At 19-1/2" high the tank will fit under most standard tonneau covers. This system fits most all full-sized diesel pickups regardless of bed length.
Titan's cross-linked polyethylene (XLHDPE) in-bed tank has a .250 nominal wall thickness, is fully baffled and gives you the advantages of advanced design and materials, as well as Titan's legendary quality and durability. Featuring built-in Tie-Downs for your payload TITAN's cross-linked polyethylene is not only corrosion proof it's nearly 200 times less heat and cold conductive than metal tanks. This tank measures 59.50 Long at top, 48.50 at bottom x 21.00 wide x 19.5 high. Lifetime warranty on tank.
Features:
60-Gallon Capacity
For Diesel Fuel Only
Electronic Transfer System
Tank Body Weighs Only 51lbs.
Durable, Corrosion Proof Finish
Easy Installation and Removal
Fits Under Tonneau Cover
Zinc Plated Hardware Features Tie-Downs
Looks Good On Any Truck
The Transfer Flow 0800115195 40 Gallon Toolbox Refueling Tank Combo is a dual purpose fuel tank system that fits in both short and long bed pickups. The refueling combo is great for manually filling your fuel tank as well as filling other vehicles or equipment, along with providing storage for tools, equipment and whatever else you carry on-board your truck. Transfer Flow's refueling tanks come with a Department of Transportation Special Permit Number, allowing them to carry gasoline, diesel, gasohol, and kerosene fuels.
This toolbox and refueling tank combo comes pre-assembled with a 12-volt pump located inside the locking storage compartment. The fuel nozzle is mounted on the outside of the toolbox, and comes with a 12-foot hose. The storage compartment of the 40-gallon unit has about six cubic feet of storage space. Built entirely of 14-gauge aluminized steel which is powder coated black, this fuel tank is baffled to reduce fuel sloshing.
Tank Dimensions: 40 Gallons - 59" Length, 18-1/2" Width, 20-1/4" Height (add 3" width for mounting tabs)
Inside Storage Dimensions: 6 Cubic Feet, 56-3/4" Length, 16-5/8" Width, 9-3/4" Height
Features:
For Many Fuels
Toolbox and Refueling Tank Combo
Black Powdercoated, Aluminized Steel Construction
Stainless Steel Locking Paddle Handles
Gas-Filled Shocks For Easy Opening
6-Year Unlimited Mileage Warranty
Application Notes:
This tank will not fit on 2013-2015 Ram Pickups with 5th Wheel Prep Package
Truck Freight Item: Allow 1-2 Weeks for delivery. Truck freight charges apply.
The Transfer Flow 0800115457 100 Gallon Toolbox Refueling Tank Combo is a dual purpose fuel tank system that fits in long bed pickups. The refueling combo is great for manually filling your fuel tank as well as filling other vehicles or equipment, along with providing storage for tools, equipment and whatever else you carry on-board your truck. Transfer Flow's refueling tanks come with a Department of Transportation Special Permit Number, allowing them to carry gasoline, diesel, gasohol, and kerosene fuels.
This toolbox and refueling tank combo comes pre-assembled with a 12-volt pump located inside the locking storage compartment. The fuel nozzle is mounted on the outside of the toolbox, and comes with a 12-foot hose. The storage compartment of the 100-gallon unit has about 8 cubic feet of storage space. Built entirely of 14-gauge aluminized steel which is powder coated black, this fuel tank is baffled to reduce fuel sloshing.
Tank Dimensions: 100 Gallons - 50-3/4" Length, 33-3/4" Width, 25" Height (add 3" width and length for mounting tabs)
Inside Storage Dimensions: 8 Cubic Feet, 50-1/2" Length, 20-1/2" Width, 13" Height
Features:
For Many Fuels
Toolbox and Refueling Tank Combo
Black Powdercoated, Aluminized Steel Construction
Stainless Steel Locking Paddle Handles
Gas-Filled Shocks For Easy Opening
6-Year Unlimited Mileage Warranty
Truck Freight Item: Allow 1-2 Weeks for delivery. Truck freight charges apply.
When it comes to in-bed refueling tanks, its hard to know whats legal and whats not. With a Transfer Flow refueling tank, you dont have to guess! Transfer Flow refueling tanks are Department of Transportation (DOT) legal to carry and transfer gas, diesel, ethanol, methanol, kerosene and jet fuel in all 50 U.S. states. Having a DOT legal refueling tank from Transfer Flow means you wont get red tagged and fined by your Highway Patrol for carrying an illegal fuel tank in the bed of your truck.
Transfer Flow refueling tanks are manufactured and engineered in the U.S.A., unlike many of the competitors. Each refuelling tank is designed with the heavy-duty user in mind, and comes preassembled with a 12-volt refueling pump, 12 foot hose with nozzle, locking fuel cap, wire harness with dash-mounted power switch and mounting hardware.
Transfer Flow uses premium suppliers for for their refueling tank parts: Great Plains Industries supplies the fuel pumps, Goodyear supplies the hose, and the locking fuel caps come from SpinSecure. The result is a tank that is trusted by Industry professionals, as well as municipalities, fire departments, and several government agencies. They chose Transfer Flow because they want safe, durable and LEGAL refueling tanks, just like you do!
Transfer Flow refueling tanks come in a variety of shapes and gallon sizes, including 40, 50, 82, 100, 109 gallons. Theyre made from 12-gauge aluminized steel for superior rust resistance and strength, are baffled for extra support, and are powder coated black for a durable finish. 6-year unlimited mileage warranty.
Tank Dimensions:
0800116206 - (40-Gallon) 40" Length, 20" Width, 14-1/4" Height (Add 3" height and width for mounting brackets)
0800109417 - (50 Gallon) 54-1/3" Length, 12-1/2" Width, 21-1/2" Height (Add 3" height and width for mounting brackets)
0800109420 - (82 Gallon) 48" Length, 19-11/16" Width, 24" Height (Add 3" height and width for mounting brackets)
0800109418 - (100 Gallon) 50-3/4" Length, 33-3/4" Width, 25" Height (Add 3" length, height and width for mounting brackets and fillneck)
0800109416 - (109 Gallon) 54-3/4" Length, 27" Width, 25" Height (Add 3" length, height and width for mounting brackets and fillneck)
0800113244 - (50/50 Split) 47-3/8" Length, 28" Width, 21-1/5" Height (Add 3" length, height and width for mounting brackets and fillneck)
Features:
Safe For Many Fuels
US DOT Approved
Baffled To Reduce Sloshing
Designed, Engineered and Manufactured In The USA
Truck Freight Item: Allow 1-2 Weeks for delivery. Truck freight charges apply.
5
5
3
The XDP Fuel Tank Sump is designed to eliminate the typical ¼ tank issues associated with the in-tank draw straws typically used with aftermarket fuel systems such as Air Dog and FASS pumps. Designed for better diesel fuel delivery, the XDP Fuel Tank Sump fastens to the bottom of your fuel tank and dramatically increases volume to the fuel pump by allowing you to get every drop of fuel out of your tank. The XDP Fuel Sump is the first sump on the market to feature a single piece horseshoe shaped internal ring allowing for a no tank drop installation. This exclusive feature allows for a faster and easier installation.
DUAL O-RING DESIGN
To provide a leak free seal, the XDP Fuel Tank Sump has been re-designed to feature (2) o-ring gaskets that install into machined grooves for a perfect fit! The XDP Fuel Tank Sump is beneficial to all trucks including stock daily drivers, mild street modifications, drag racing applications, and even sled-pulling. Includes barbed fitting for 1/2" hose.
Features:
Dual O-Ring Gaskets
No tank drop installation cuts installation time
Large opening for unrestricted fuel flow
Made from Aircraft grade T6 billet aluminum
Precision CNC machining technology for a perfect fit
Works great with stock or aftermarket fuel tanks
MADE IN THE USA!
Note: Not recommended for off-road applications or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling.
Warranty Info:Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit. Click Here for full warranty policy.
4.875
5
8
The XDP Fuel Tank Sump with Built-In Fuel Return XD243 provides you with a perfect option to maximize fuel delivery, and customization when installing your aftermarket fuel system. Avoid the common 1/4 tank issues associated with in-tank draw straws used with fuel systems such as AirDog, FASS and many others. The XD243 features a one-hole design that only requires drilling a single 3" hole for installation. A machined groove for the o-ring gasket ensures a leak-free seal, and the inner-ring is designed to fit into the bottom of the tank without requiring you to remove it from the truck.
What sets the XD243 apart from the other sumps in the XDP lineup is the built-in return. Installation of most aftermarket fuel systems require you to cut and "tee" into your factory fuel filler neck. In some cases, modifications to the filler neck can cause leaks, and also cause fuel pumps to "click off" when refueling. Using the built-in return port, you can easily route return fuel back to the tank without having to modify any other components for a clean and easy installation. For optimal fuel quality, the XDP Sump features a stand pipe that places the returned fuel above the fuel feed. This design eliminates the possibility of feeding your engine the aerated return fuel coming back to your fuel tank. Includes barbed fittings for 1/2" hose.
Features:
Built-In Fuel Return
No Tank Drop Installation
Stand Pipe Separates Return Fuel and Feed
Made From Aircraft Grade T6 Billet Aluminum
Works Great With Stock and Aftermarket Fuel Tanks
MADE IN THE USA!
Note: Not recommended for off-road applications or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling.
Warranty Info:Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit. Click Here for full warranty policy.
5
5
2
The XDP Fuel Tank Sump XD182 is the perfect solution for those wanting to maximize fuel delivery to their engine. This One Hole Design Fuel Tank Sump is easier to install than others on the market, and it only requires one hole in your fuel tank! The XD182 provides an outlet for fuel on the bottom of your fuel tank, which eliminates the typical ¼ tank issues associated with in-tank draw straws used with aftermarket fuel system such as Air Dog and FASS Pumps.
For an easy install, the inner-ring is designed to fit in the bottom of the tank without needing to remove it from the truck. A machined groove for the o-ring gasket ensures a leak free seal, and the 2-bolt design eliminates the need to drill additional bolt holes in your tank. For use with aftermarket fuel systems. Includes barbed 1/2 NPT fitting for 1/2" hose.
Features:Built-In Drain Plug
No Tank Drop Installation
Large Opening for Unrestricted Fuel Flow
Made From Aircraft Grade T6 Billet Aluminum
Works Great With Stock and Aftermarket Fuel Tanks
MADE IN THE USA!
Note: Not recommended for off-road applications or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling.Warranty Info:Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit. Click Here for full warranty policy.